Start: 2014-01-20 15:43:23 UTC Package: shtool Priority: optional Section: devel Installed-Size: 556 Maintainer: William Vera Architecture: all Version: 2.0.8-6 Depends: perl Suggests: autoconf, automake, libtool Filename: pool/main/s/shtool/shtool_2.0.8-6_all.deb Size: 159080 MD5sum: 81afa093101b157ab3c231982f300639 SHA1: dddd0a5c4cadd97f4dbb9193f4fc86ea0e3f3b50 SHA256: 2b35c568172171f4805b1c66c520655bfa3ca67982b16183877ad7213a8fa5e3 Description: portable shell tool from the GNU project GNU shtool is a tool for developers of software programs. It is a compilation of small but very stable and portable shell scripts into a single shell tool. All ingredients were in successful use over many years in various free software projects. The compiled shtool program is intended to be used inside the source tree of other free software packages. There it can overtake various (usually non-portable) tasks related to the building and installation of such a package. It especially can replace the old mkdir.sh, install.sh and related scripts. Homepage: http://www.gnu.org/software/shtool/ Tag: devel::buildtools, devel::packaging, implemented-in::shell, interface::commandline, role::program, scope::utility, suite::gnu Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt shtool=2.0.8-6 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.56~201312121107~0.55_bpo70+1-96-g4bd17d2 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt shtool=2.0.8-6 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmplp7ELp 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmplp7ELp 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmplp7ELp', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.9s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmplp7ELp', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.9s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.9s DEBUG: Created policy-rc.d and chmodded it. 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'update'] 0m2.0s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m2.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'update'] 0m2.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmplp7ELp/tmp/scripts/ 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmplp7ELp/tmp/scripts/ 0m2.3s INFO: Running scripts post_setup 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_setup_experimental'] 0m2.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_setup_experimental'] 0m2.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_setup_forbid_home'] 0m2.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_setup_forbid_home'] 0m2.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.3s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (9333 kB/s) Selecting previously deselected package adduser. (Reading database ... 6155 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'clean'] 0m3.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'clean'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--get-selections', '*'] 0m3.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--get-selections', '*'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg-divert', '--list'] 0m3.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m3.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg-divert', '--list'] 0m3.8s INFO: apt-cache does not know about any of the requested packages 0m3.8s INFO: Running scripts pre_test 0m3.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_test_root_password'] 0m3.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_test_root_password'] 0m3.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m4.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m4.8s DEBUG: No broken symlinks as far as we can find. 0m4.8s INFO: Running scripts pre_install 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_install_database-server'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_install_database-server'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_install_exceptions'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_install_exceptions'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-cache', 'show', 'shtool=2.0.8-6'] 0m4.9s DUMP: Package: shtool Priority: optional Section: devel Installed-Size: 556 Maintainer: William Vera Architecture: all Version: 2.0.8-6 Depends: perl Suggests: autoconf, automake, libtool Filename: pool/main/s/shtool/shtool_2.0.8-6_all.deb Size: 159080 MD5sum: 81afa093101b157ab3c231982f300639 SHA1: dddd0a5c4cadd97f4dbb9193f4fc86ea0e3f3b50 SHA256: 2b35c568172171f4805b1c66c520655bfa3ca67982b16183877ad7213a8fa5e3 Description: portable shell tool from the GNU project GNU shtool is a tool for developers of software programs. It is a compilation of small but very stable and portable shell scripts into a single shell tool. All ingredients were in successful use over many years in various free software projects. The compiled shtool program is intended to be used inside the source tree of other free software packages. There it can overtake various (usually non-portable) tasks related to the building and installation of such a package. It especially can replace the old mkdir.sh, install.sh and related scripts. Homepage: http://www.gnu.org/software/shtool/ Tag: devel::buildtools, devel::packaging, implemented-in::shell, interface::commandline, role::program, scope::utility, suite::gnu 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-cache', 'show', 'shtool=2.0.8-6'] 0m4.9s DEBUG: Starting command: ['dpkg-deb', '-b', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpmRUs5s/piuparts-depends-dummy'] 0m4.9s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpmRUs5s/piuparts-depends-dummy.deb'. 0m4.9s DEBUG: Command ok: ['dpkg-deb', '-b', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpmRUs5s/piuparts-depends-dummy'] 0m4.9s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpmRUs5s/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmplp7ELp/tmp 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.0s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6278 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on perl; however: Package perl is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m5.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', '-yf', 'install'] 0m7.5s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libdb4.7 libgdbm3 perl perl-modules Suggested packages: perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make Recommended packages: netbase The following NEW packages will be installed: libdb4.7 libgdbm3 perl perl-modules 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 8653 kB of archives. After this operation, 36.8 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main perl-modules all 5.10.1-17squeeze6 [3482 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main perl amd64 5.10.1-17squeeze6 [4462 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 8653 kB in 1s (6693 kB/s) Selecting previously deselected package perl-modules. (Reading database ... 6278 files and directories currently installed.) Unpacking perl-modules (from .../perl-modules_5.10.1-17squeeze6_all.deb) ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.1-17squeeze6_amd64.deb) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up perl-modules (5.10.1-17squeeze6) ... Setting up perl (5.10.1-17squeeze6) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode. Setting up piuparts-depends-dummy (0.invalid.0) ... 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', '-yf', 'install'] 0m7.5s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m7.5s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmplp7ELp/tmp/piuparts-depends-dummy.deb 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.5s DUMP: (Reading database ... 7623 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'clean'] 0m7.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'clean'] 0m8.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m8.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m9.2s DEBUG: No broken symlinks as far as we can find. 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-cache', 'policy'] 0m9.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.8,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-cache', 'policy'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-cache', 'policy', 'shtool'] 0m9.3s DUMP: shtool: Installed: (none) Candidate: 2.0.8-6 Version table: 2.0.8-6 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m9.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-cache', 'policy', 'shtool'] 0m9.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', '-y', 'install', 'shtool=2.0.8-6'] 0m9.9s DUMP: Reading package lists... Building dependency tree... Reading state information... Suggested packages: autoconf automake libtool The following NEW packages will be installed: shtool 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 159 kB of archives. After this operation, 569 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main shtool all 2.0.8-6 [159 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 159 kB in 0s (4947 kB/s) Selecting previously deselected package shtool. (Reading database ... 7623 files and directories currently installed.) Unpacking shtool (from .../shtool_2.0.8-6_all.deb) ... Setting up shtool (2.0.8-6) ... 0m9.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', '-y', 'install', 'shtool=2.0.8-6'] 0m9.9s INFO: Running scripts post_install 0m9.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m10.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m11.1s DEBUG: No broken symlinks as far as we can find. 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--get-selections', '*'] 0m11.2s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.7 install libdb4.8 install libgcc1 install libgdbm3 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl install perl-base install perl-modules install readline-common install sed install sensible-utils install shtool install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--get-selections', '*'] 0m11.8s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmplp7ELp', '-ac'] 0m12.6s DUMP: debsums: no md5sums for mawk 0m12.6s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmplp7ELp', '-ac'] 0m12.6s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'shtool'] 0m12.6s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'shtool'] 0m12.6s INFO: Running scripts pre_remove 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_exceptions'] 0m12.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/pre_remove_exceptions'] 0m12.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'remove', 'perl-modules', 'libdb4.7', 'libgdbm3', 'perl', 'shtool'] 0m13.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libdb4.7 libgdbm3 perl perl-modules shtool 0 upgraded, 0 newly installed, 5 to remove and 0 not upgraded. After this operation, 37.4 MB disk space will be freed. (Reading database ... 7678 files and directories currently installed.) Removing shtool ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'remove', 'perl-modules', 'libdb4.7', 'libgdbm3', 'perl', 'shtool'] 0m13.4s INFO: Running scripts post_remove 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_remove_exceptions_lenny'] 0m13.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_remove_exceptions_lenny'] 0m13.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--purge', 'perl-modules', 'libdb4.7', 'libgdbm3', 'perl'] 0m13.5s DUMP: (Reading database ... 6281 files and directories currently installed.) Removing perl-modules ... Purging configuration files for perl-modules ... dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. Removing libgdbm3 ... Purging configuration files for libgdbm3 ... dpkg: warning: ignoring request to remove perl which isn't installed. 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--purge', 'perl-modules', 'libdb4.7', 'libgdbm3', 'perl'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--purge', 'shtool'] 0m13.5s DUMP: dpkg: warning: ignoring request to remove shtool which isn't installed. 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--purge', 'shtool'] 0m13.5s INFO: Running scripts post_purge 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_purge_exceptions'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'tmp/scripts/post_purge_exceptions'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--purge', '--pending'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--purge', '--pending'] 0m13.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--remove', '--pending'] 0m13.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg', '--remove', '--pending'] 0m13.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m13.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m14.6s DEBUG: No broken symlinks as far as we can find. 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg-divert', '--list'] 0m14.6s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'dpkg-divert', '--list'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'clean'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'apt-get', 'clean'] 0m15.7s INFO: PASS: Installation and purging test. 0m15.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'umount', '/proc'] 0m15.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmplp7ELp', 'umount', '/proc'] 0m15.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m16.0s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmplp7ELp'] 0m16.0s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmplp7ELp 0m16.0s INFO: PASS: All tests. 0m16.0s INFO: piuparts run ends. ret=0 End: 2014-01-20 15:43:40 UTC