Start: 2014-08-09 20:02:22 UTC Package: siggen Priority: optional Section: sound Installed-Size: 468 Maintainer: Jens Peter Secher Architecture: amd64 Version: 2.3.10-2 Depends: libc6 (>= 2.3), libncurses5 (>= 5.6+20071006-3) Filename: pool/main/s/siggen/siggen_2.3.10-2_amd64.deb Size: 165136 MD5sum: 7570c5855d799dd74cfece73f78067ae SHA1: b53cf59c022bca6ea59589eea4090f1443cbca92 SHA256: 1dc09fd153ddefd0d86f48ad51b32640783b00eb1c38e6f61085dca87c35256b Description: Waveform generation tools a set of tools for imitating a laboratory Signal Generator, generating audio signals out of Linux's /dev/dsp audio device. There is support for mono and/or stereo and 8 or 16 bit samples. The tools include: . * soundinfo: display some of the programming capabilities of the sound system support for the mixer device /dev/mixer and the DSP device. Also shows some of the ioctl calls in action. . * signalgen: a command line signal generator where details are specified from the command line for generating sine, cos, square, triangle, sawtooth, pulse, noise waves. Frequency, sample rate, relative amplitude etc. can be specified through command line options. The signal is played continuously until the program is stopped. There are options to save the basic raw digital samples raw to file or to a WAVE format file. . * swgen: a command line sweep generator. Both the sweeping and swept waveforms can be specified, along with the sweeping frequency and the swept frequency range. Otherwise similar to sgen above. . * siggen: an Ncurses screen based Signal Generator for two separate channels. On stereo audio cards the two channels are played on separate outputs. On mono cards the teo channels are digitally mixed onto the one output. Type of waveform, frequency, amplitude, sample rate etc are specified/changed via a screen menu. It plays continuously. Changes to parameters take effect nearly immediately. . * sweepgen: an Ncurses screen based Sweep generator (see swgen and siggen above). . * tones: a command line program to generate several successive tones of varying frequency, and optional differing waveforms, durations and intensities. The sequence of tones can be either played once, or repetitively or the samples can be written to a file in raw or WAV format. This could make the basis of an auto-dialer for tone phones. . * smix: a simple command line program for getting and setting the mixer settings. . * fsynth: an Ncurses based fourier synthesis realtime generator. Homepage: http://www.comp.leeds.ac.uk/jj/linux/siggen.html Tag: uitoolkit::ncurses Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt siggen=2.3.10-2 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt siggen=2.3.10-2 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpUStS_j 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpUStS_j 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpUStS_j', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DUMP: tar: ./proc: time stamp 2014-09-01 04:24:41 is 1930937.837707369 s in the future 0m1.7s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpUStS_j', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.7s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.7s DEBUG: Created policy-rc.d and chmodded it. 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'update'] 0m3.4s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1655 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8370 kB] Fetched 8468 kB in 0s (9052 kB/s) Reading package lists... 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'update'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', '-yf', 'dist-upgrade'] 0m4.5s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files dpkg tzdata 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3117 kB of archives. After this operation, 53.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze10 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main dpkg amd64 1.15.11 [2402 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2014e-0squeeze1 [639 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3117 kB in 0s (43.4 MB/s) (Reading database ... 6135 files and directories currently installed.) Preparing to replace base-files 6.0squeeze9 (using .../base-files_6.0squeeze10_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze10) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6135 files and directories currently installed.) Preparing to replace dpkg 1.15.8.13 (using .../dpkg_1.15.11_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.11) ... (Reading database ... 6135 files and directories currently installed.) Preparing to replace tzdata 2013i-0squeeze1 (using .../tzdata_2014e-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2014e-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Aug 9 20:02:27 UTC 2014. Universal Time is now: Sat Aug 9 20:02:27 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', '-yf', 'dist-upgrade'] 0m4.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpUStS_j/tmp/scripts/ 0m4.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpUStS_j/tmp/scripts/ 0m4.5s INFO: Running scripts post_setup 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_experimental'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_experimental'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_forbid_home'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_forbid_home'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.4s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (14.1 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'clean'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'clean'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--get-selections', '*'] 0m6.0s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--get-selections', '*'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg-divert', '--list'] 0m6.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg-divert', '--list'] 0m6.0s INFO: apt-cache does not know about any of the requested packages 0m6.0s INFO: Running scripts pre_test 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_test_root_password'] 0m6.0s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_test_root_password'] 0m6.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m6.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m7.0s DEBUG: No broken symlinks as far as we can find. 0m7.0s INFO: Running scripts pre_install 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_install_database-server'] 0m7.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_install_database-server'] 0m7.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_install_exceptions'] 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_install_exceptions'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_install_extras'] 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_install_extras'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-cache', 'show', 'siggen=2.3.10-2'] 0m7.1s DUMP: Package: siggen Priority: optional Section: sound Installed-Size: 468 Maintainer: Jens Peter Secher Architecture: amd64 Version: 2.3.10-2 Depends: libc6 (>= 2.3), libncurses5 (>= 5.6+20071006-3) Filename: pool/main/s/siggen/siggen_2.3.10-2_amd64.deb Size: 165136 MD5sum: 7570c5855d799dd74cfece73f78067ae SHA1: b53cf59c022bca6ea59589eea4090f1443cbca92 SHA256: 1dc09fd153ddefd0d86f48ad51b32640783b00eb1c38e6f61085dca87c35256b Description: Waveform generation tools a set of tools for imitating a laboratory Signal Generator, generating audio signals out of Linux's /dev/dsp audio device. There is support for mono and/or stereo and 8 or 16 bit samples. The tools include: . * soundinfo: display some of the programming capabilities of the sound system support for the mixer device /dev/mixer and the DSP device. Also shows some of the ioctl calls in action. . * signalgen: a command line signal generator where details are specified from the command line for generating sine, cos, square, triangle, sawtooth, pulse, noise waves. Frequency, sample rate, relative amplitude etc. can be specified through command line options. The signal is played continuously until the program is stopped. There are options to save the basic raw digital samples raw to file or to a WAVE format file. . * swgen: a command line sweep generator. Both the sweeping and swept waveforms can be specified, along with the sweeping frequency and the swept frequency range. Otherwise similar to sgen above. . * siggen: an Ncurses screen based Signal Generator for two separate channels. On stereo audio cards the two channels are played on separate outputs. On mono cards the teo channels are digitally mixed onto the one output. Type of waveform, frequency, amplitude, sample rate etc are specified/changed via a screen menu. It plays continuously. Changes to parameters take effect nearly immediately. . * sweepgen: an Ncurses screen based Sweep generator (see swgen and siggen above). . * tones: a command line program to generate several successive tones of varying frequency, and optional differing waveforms, durations and intensities. The sequence of tones can be either played once, or repetitively or the samples can be written to a file in raw or WAV format. This could make the basis of an auto-dialer for tone phones. . * smix: a simple command line program for getting and setting the mixer settings. . * fsynth: an Ncurses based fourier synthesis realtime generator. Homepage: http://www.comp.leeds.ac.uk/jj/linux/siggen.html Tag: uitoolkit::ncurses 0m7.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-cache', 'show', 'siggen=2.3.10-2'] 0m7.1s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3), libncurses5 (>= 5.6+20071006-3) 0m7.1s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpdtekZA/piuparts-depends-dummy'] 0m7.2s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpdtekZA/piuparts-depends-dummy.deb'. 0m7.2s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpdtekZA/piuparts-depends-dummy'] 0m7.2s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpdtekZA/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpUStS_j/tmp 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.2s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', '-yf', 'install'] 0m7.6s DUMP: Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', '-yf', 'install'] 0m7.6s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m7.6s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpUStS_j/tmp/piuparts-depends-dummy.deb 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m7.6s DUMP: piuparts-depends-dummy install ok installed 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.6s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'clean'] 0m7.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'clean'] 0m8.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m8.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m9.2s DEBUG: No broken symlinks as far as we can find. 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-cache', 'policy'] 0m9.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-cache', 'policy'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-cache', 'policy', 'siggen'] 0m9.2s DUMP: siggen: Installed: (none) Candidate: 2.3.10-2 Version table: 2.3.10-2 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-cache', 'policy', 'siggen'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', '-y', 'install', 'siggen=2.3.10-2'] 0m10.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: siggen 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 165 kB of archives. After this operation, 479 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main siggen amd64 2.3.10-2 [165 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 165 kB in 0s (2621 kB/s) Selecting previously deselected package siggen. (Reading database ... 6261 files and directories currently installed.) Unpacking siggen (from .../siggen_2.3.10-2_amd64.deb) ... Setting up siggen (2.3.10-2) ... 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', '-y', 'install', 'siggen=2.3.10-2'] 0m10.1s INFO: Running scripts post_install 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_install_exceptions'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_install_exceptions'] 0m10.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m10.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m11.2s DEBUG: No broken symlinks as far as we can find. 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--get-selections', '*'] 0m11.3s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install siggen install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m11.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--get-selections', '*'] 0m11.8s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpUStS_j', '-ac'] 0m12.3s DUMP: debsums: no md5sums for mawk 0m12.3s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpUStS_j', '-ac'] 0m12.3s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m12.4s DUMP: 0.12~bpo70+1 0m12.4s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m12.4s INFO: Running adequate version 0.12~bpo70+1 now. 0m12.4s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'siggen'] 0m12.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'siggen'] 0m12.5s INFO: Running scripts pre_remove 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_exceptions'] 0m12.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/pre_remove_exceptions'] 0m12.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'remove', 'siggen'] 0m13.1s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: siggen 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 479 kB disk space will be freed. (Reading database ... 6313 files and directories currently installed.) Removing siggen ... 0m13.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'remove', 'siggen'] 0m13.1s INFO: Running scripts post_remove 0m13.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_remove_exceptions_lenny'] 0m13.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_remove_exceptions_lenny'] 0m13.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_remove_extras'] 0m13.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_remove_extras'] 0m13.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--purge', 'siggen'] 0m13.2s DUMP: dpkg: warning: ignoring request to remove siggen which isn't installed. 0m13.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--purge', 'siggen'] 0m13.2s INFO: Running scripts post_purge 0m13.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_purge_exceptions'] 0m13.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'tmp/scripts/post_purge_exceptions'] 0m13.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--purge', '--pending'] 0m13.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--purge', '--pending'] 0m13.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--remove', '--pending'] 0m13.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg', '--remove', '--pending'] 0m13.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m13.5s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m14.3s DEBUG: No broken symlinks as far as we can find. 0m14.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg-divert', '--list'] 0m14.3s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m14.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'dpkg-divert', '--list'] 0m14.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'clean'] 0m14.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'apt-get', 'clean'] 0m15.2s INFO: PASS: Installation and purging test. 0m15.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'umount', '/proc'] 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpUStS_j', 'umount', '/proc'] 0m15.5s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m15.5s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpUStS_j'] 0m15.5s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpUStS_j 0m15.6s INFO: PASS: All tests. 0m15.6s INFO: piuparts run ends. ret=0 End: 2014-08-09 20:02:38 UTC