Start: 2014-02-27 07:44:01 UTC Package: sysv-rc-conf Priority: optional Section: admin Installed-Size: 68 Maintainer: Francesco Pedrini Architecture: all Version: 0.99-6 Depends: libcurses-ui-perl, sysv-rc Filename: pool/main/s/sysv-rc-conf/sysv-rc-conf_0.99-6_all.deb Size: 24022 MD5sum: 513cb467f5c6288ec21e502e2aef04bd SHA1: a02e1ffcb956b90397f8e648e1d609add9aa938a SHA256: df6d5e3d0ba9b128b0a84f310bc0769a3d0e8d5d0adcdc93c5afa23064dcbc9a Description: SysV init runlevel configuration tool for the terminal sysv-rc-conf provides a terminal GUI for managing "/etc/rc{runlevel}.d/" symlinks. The interface comes in two different flavors, one that simply allows turning services on or off and another that allows for more fine tuned management of the symlinks. Unlike most runlevel config programs, you can edit startup scripts for any runlevel, not just your current one. Tag: admin::boot, interface::text-mode, role::program, scope::utility, use::configuring, use::editing Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt sysv-rc-conf=0.99-6 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57.1~201402172317~0.57-12-g4a108e2 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt sysv-rc-conf=0.99-6 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmprN3Vze 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmprN3Vze 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmprN3Vze', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmprN3Vze', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'update'] 0m3.4s DUMP: Get:1 http://mirror.bm.debian.org squeeze Release.gpg [1672 B] Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Get:2 http://mirror.bm.debian.org squeeze Release [96.0 kB] Get:3 http://mirror.bm.debian.org squeeze/main amd64 Packages [8388 kB] Fetched 8486 kB in 0s (9217 kB/s) Reading package lists... 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'update'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', '-yf', 'dist-upgrade'] 0m4.4s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: base-files gnupg gpgv tzdata 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3067 kB of archives. After this operation, 52.2 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main base-files amd64 6.0squeeze9 [76.1 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main gpgv amd64 1.4.10-4+squeeze4 [222 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main gnupg amd64 1.4.10-4+squeeze4 [2148 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main tzdata all 2013i-0squeeze1 [621 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3067 kB in 0s (29.9 MB/s) (Reading database ... 6155 files and directories currently installed.) Preparing to replace base-files 6.0squeeze8 (using .../base-files_6.0squeeze9_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.0squeeze9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze3 (using .../gpgv_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze3 (using .../gnupg_1.4.10-4+squeeze4_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-4+squeeze4) ... (Reading database ... 6155 files and directories currently installed.) Preparing to replace tzdata 2013d-0squeeze1 (using .../tzdata_2013i-0squeeze1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2013i-0squeeze1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Feb 27 07:44:06 UTC 2014. Universal Time is now: Thu Feb 27 07:44:06 UTC 2014. Run 'dpkg-reconfigure tzdata' if you wish to change it. 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', '-yf', 'dist-upgrade'] 0m4.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmprN3Vze/tmp/scripts/ 0m4.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmprN3Vze/tmp/scripts/ 0m4.4s INFO: Running scripts post_setup 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_experimental'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_experimental'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_forbid_home'] 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_forbid_home'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.4s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' `/bin/sync' -> `true' 0m4.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_force-unsafe-io'] 0m4.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_squeeze-backports'] 0m4.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Reading state information... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (29.1 MB/s) Selecting previously deselected package adduser. (Reading database ... 6135 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'clean'] 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'clean'] 0m5.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--get-selections', '*'] 0m5.9s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m5.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--get-selections', '*'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg-divert', '--list'] 0m6.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg-divert', '--list'] 0m6.0s INFO: apt-cache does not know about any of the requested packages 0m6.0s INFO: Running scripts pre_test 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_test_root_password'] 0m6.0s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_test_root_password'] 0m6.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m6.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m7.4s DEBUG: No broken symlinks as far as we can find. 0m7.4s INFO: Running scripts pre_install 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_install_database-server'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_install_database-server'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_install_exceptions'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_install_exceptions'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_install_extras'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_install_extras'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-cache', 'show', 'sysv-rc-conf=0.99-6'] 0m7.4s DUMP: Package: sysv-rc-conf Priority: optional Section: admin Installed-Size: 68 Maintainer: Francesco Pedrini Architecture: all Version: 0.99-6 Depends: libcurses-ui-perl, sysv-rc Filename: pool/main/s/sysv-rc-conf/sysv-rc-conf_0.99-6_all.deb Size: 24022 MD5sum: 513cb467f5c6288ec21e502e2aef04bd SHA1: a02e1ffcb956b90397f8e648e1d609add9aa938a SHA256: df6d5e3d0ba9b128b0a84f310bc0769a3d0e8d5d0adcdc93c5afa23064dcbc9a Description: SysV init runlevel configuration tool for the terminal sysv-rc-conf provides a terminal GUI for managing "/etc/rc{runlevel}.d/" symlinks. The interface comes in two different flavors, one that simply allows turning services on or off and another that allows for more fine tuned management of the symlinks. Unlike most runlevel config programs, you can edit startup scripts for any runlevel, not just your current one. Tag: admin::boot, interface::text-mode, role::program, scope::utility, use::configuring, use::editing 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-cache', 'show', 'sysv-rc-conf=0.99-6'] 0m7.4s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libcurses-ui-perl, sysv-rc 0m7.4s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpHm7_kf/piuparts-depends-dummy'] 0m7.5s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpHm7_kf/piuparts-depends-dummy.deb'. 0m7.5s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpHm7_kf/piuparts-depends-dummy'] 0m7.5s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpHm7_kf/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmprN3Vze/tmp 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.5s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6258 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libcurses-ui-perl; however: Package libcurses-ui-perl is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m7.5s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m7.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', '-yf', 'install'] 0m9.0s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libcurses-perl libcurses-ui-perl libdb4.7 libgdbm3 libncursesw5 libterm-readkey-perl perl perl-modules Suggested packages: perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make Recommended packages: libgpm2 netbase The following NEW packages will be installed: libcurses-perl libcurses-ui-perl libdb4.7 libgdbm3 libncursesw5 libterm-readkey-perl perl perl-modules 0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 9455 kB of archives. After this operation, 39.0 MB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main perl-modules all 5.10.1-17squeeze6 [3482 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main perl amd64 5.10.1-17squeeze6 [4462 kB] Get:5 http://mirror.bm.debian.org/debian/ squeeze/main libncursesw5 amd64 5.7+20100313-5 [390 kB] Get:6 http://mirror.bm.debian.org/debian/ squeeze/main libcurses-perl amd64 1.28-1 [138 kB] Get:7 http://mirror.bm.debian.org/debian/ squeeze/main libterm-readkey-perl amd64 2.30-4 [33.7 kB] Get:8 http://mirror.bm.debian.org/debian/ squeeze/main libcurses-ui-perl all 0.9607-1 [240 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 9455 kB in 0s (31.7 MB/s) Selecting previously deselected package perl-modules. (Reading database ... 6258 files and directories currently installed.) Unpacking perl-modules (from .../perl-modules_5.10.1-17squeeze6_all.deb) ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.1-17squeeze6_amd64.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20100313-5_amd64.deb) ... Selecting previously deselected package libcurses-perl. Unpacking libcurses-perl (from .../libcurses-perl_1.28-1_amd64.deb) ... Selecting previously deselected package libterm-readkey-perl. Unpacking libterm-readkey-perl (from .../libterm-readkey-perl_2.30-4_amd64.deb) ... Selecting previously deselected package libcurses-ui-perl. Unpacking libcurses-ui-perl (from .../libcurses-ui-perl_0.9607-1_all.deb) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libgdbm3 (1.8.3-9) ... Setting up libncursesw5 (5.7+20100313-5) ... Setting up perl-modules (5.10.1-17squeeze6) ... Setting up perl (5.10.1-17squeeze6) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode. Setting up libcurses-perl (1.28-1) ... Setting up libterm-readkey-perl (2.30-4) ... Setting up libcurses-ui-perl (0.9607-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m9.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', '-yf', 'install'] 0m9.0s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m9.0s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmprN3Vze/tmp/piuparts-depends-dummy.deb 0m9.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m9.1s DUMP: piuparts-depends-dummy install ok installed 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m9.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.1s DUMP: (Reading database ... 7747 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m9.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m9.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'clean'] 0m9.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'clean'] 0m9.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m10.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m11.2s DEBUG: No broken symlinks as far as we can find. 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-cache', 'policy'] 0m11.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.9,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-cache', 'policy'] 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-cache', 'policy', 'sysv-rc-conf'] 0m11.2s DUMP: sysv-rc-conf: Installed: (none) Candidate: 0.99-6 Version table: 0.99-6 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-cache', 'policy', 'sysv-rc-conf'] 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', '-y', 'install', 'sysv-rc-conf=0.99-6'] 0m11.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: sysv-rc-conf 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 24.0 kB of archives. After this operation, 69.6 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main sysv-rc-conf all 0.99-6 [24.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 24.0 kB in 0s (419 kB/s) Selecting previously deselected package sysv-rc-conf. (Reading database ... 7747 files and directories currently installed.) Unpacking sysv-rc-conf (from .../sysv-rc-conf_0.99-6_all.deb) ... Setting up sysv-rc-conf (0.99-6) ... 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', '-y', 'install', 'sysv-rc-conf=0.99-6'] 0m11.8s INFO: Running scripts post_install 0m11.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m12.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m13.0s DEBUG: No broken symlinks as far as we can find. 0m13.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--get-selections', '*'] 0m13.1s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libcurses-perl install libcurses-ui-perl install libdb4.7 install libdb4.8 install libgcc1 install libgdbm3 install liblocale-gettext-perl install liblzma2 install libncurses5 install libncursesw5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libterm-readkey-perl install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl install perl-base install perl-modules install readline-common install sed install sensible-utils install sysv-rc install sysv-rc-conf install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m13.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--get-selections', '*'] 0m13.7s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmprN3Vze', '-ac'] 0m14.4s DUMP: debsums: no md5sums for mawk 0m14.4s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmprN3Vze', '-ac'] 0m14.4s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m14.5s DUMP: 0.11.3~bpo70+1 0m14.5s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m14.5s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m14.5s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'sysv-rc-conf'] 0m14.5s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'sysv-rc-conf'] 0m14.5s INFO: Running scripts pre_remove 0m14.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m14.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m14.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_exceptions'] 0m14.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/pre_remove_exceptions'] 0m14.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'remove', 'perl-modules', 'libncursesw5', 'perl', 'libdb4.7', 'libgdbm3', 'libcurses-perl', 'libterm-readkey-perl', 'libcurses-ui-perl', 'sysv-rc-conf'] 0m15.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libcurses-perl libcurses-ui-perl libdb4.7 libgdbm3 libncursesw5 libterm-readkey-perl perl perl-modules sysv-rc-conf 0 upgraded, 0 newly installed, 9 to remove and 0 not upgraded. After this operation, 39.1 MB disk space will be freed. (Reading database ... 7755 files and directories currently installed.) Removing sysv-rc-conf ... Removing libcurses-ui-perl ... Removing libcurses-perl ... Removing libterm-readkey-perl ... Removing libncursesw5 ... Removing perl ... Removing perl-modules ... Removing libdb4.7 ... Removing libgdbm3 ... 0m15.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'remove', 'perl-modules', 'libncursesw5', 'perl', 'libdb4.7', 'libgdbm3', 'libcurses-perl', 'libterm-readkey-perl', 'libcurses-ui-perl', 'sysv-rc-conf'] 0m15.3s INFO: Running scripts post_remove 0m15.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_remove_exceptions_lenny'] 0m15.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_remove_exceptions_lenny'] 0m15.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_remove_extras'] 0m15.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_remove_extras'] 0m15.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--purge', 'perl-modules', 'libncursesw5', 'perl', 'libdb4.7', 'libgdbm3', 'libcurses-perl', 'libterm-readkey-perl', 'libcurses-ui-perl'] 0m15.4s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing perl-modules ... Purging configuration files for perl-modules ... Removing libncursesw5 ... Purging configuration files for libncursesw5 ... dpkg: warning: ignoring request to remove perl which isn't installed. dpkg: warning: ignoring request to remove libdb4.7 which isn't installed. Removing libgdbm3 ... Purging configuration files for libgdbm3 ... dpkg: warning: ignoring request to remove libcurses-perl which isn't installed. dpkg: warning: ignoring request to remove libterm-readkey-perl which isn't installed. dpkg: warning: ignoring request to remove libcurses-ui-perl which isn't installed. 0m15.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--purge', 'perl-modules', 'libncursesw5', 'perl', 'libdb4.7', 'libgdbm3', 'libcurses-perl', 'libterm-readkey-perl', 'libcurses-ui-perl'] 0m15.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--purge', 'sysv-rc-conf'] 0m15.4s DUMP: (Reading database ... 6258 files and directories currently installed.) Removing sysv-rc-conf ... Purging configuration files for sysv-rc-conf ... 0m15.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--purge', 'sysv-rc-conf'] 0m15.4s INFO: Running scripts post_purge 0m15.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_purge_exceptions'] 0m15.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'tmp/scripts/post_purge_exceptions'] 0m15.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--purge', '--pending'] 0m15.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--purge', '--pending'] 0m15.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--remove', '--pending'] 0m15.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg', '--remove', '--pending'] 0m15.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m15.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m16.5s DEBUG: No broken symlinks as far as we can find. 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg-divert', '--list'] 0m16.5s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m16.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'dpkg-divert', '--list'] 0m16.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'clean'] 0m16.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'apt-get', 'clean'] 0m17.6s INFO: PASS: Installation and purging test. 0m17.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'umount', '/proc'] 0m17.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmprN3Vze', 'umount', '/proc'] 0m17.9s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m17.9s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmprN3Vze'] 0m17.9s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmprN3Vze 0m18.0s INFO: PASS: All tests. 0m18.0s INFO: piuparts run ends. ret=0 End: 2014-02-27 07:44:19 UTC