Start: 2014-11-01 03:20:10 UTC Package: umview-mod-umfuseiso9660 Priority: optional Section: misc Installed-Size: 56 Maintainer: Debian VSquare Team Architecture: amd64 Source: fuse-umfuse-iso9660 (0.2b-1) Version: 0.2b-1+b1 Depends: libc6 (>= 2.2.5), libfuse2 (>= 2.6), libiso9660-7, libumlib0, zlib1g (>= 1:1.1.4) Filename: pool/main/f/fuse-umfuse-iso9660/umview-mod-umfuseiso9660_0.2b-1+b1_amd64.deb Size: 8494 MD5sum: 40fff50ac6052c8b653cfb46eb97c047 SHA1: bdede0216df832cb596e439052fdf3472e2ff7a8 SHA256: 9609eb57383b3953ca7c1f25af40633658184a2b5a29fed597f5973e34f5ec8a Description: View-OS in user space - ISO9660 module for UMFUSE View-OS is a novel approach to the process/kernel interface. The semantics of each system call can be assigned process by process giving the user the right to decide which view of the system each process has to join. Each process can "see" a different file system structure, networking resources, processor, devices. Moreover some of the resources can be provided by the user him/herself, thus these resource can be private to the single process and are not known a priori by the system. Groups of processes can share the same view but this is just an optimization to share management methods. . For more information, see http://wiki.virtualsquare.org . UMView is a user-mode implementation of View-OS. Processes are run with a controlling daemon that captures all the system calls (at present using the ptrace() system call) and uses dynamically loadable modules to change their semantic. . This package contains a sub-module for umfuse. umfuse is contained in the main UMView package and allows almost complete source compatibility with FUSE modules. umfuseiso9660 can be used to mount ISO-9660 CD images inside an UMView instance. Homepage: http://view-os.sourceforge.net Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt umview-mod-umfuseiso9660=0.2b-1+b1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.61~201410311243~0.59-25-gb896a6f starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt umview-mod-umfuseiso9660=0.2b-1+b1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.63-2+deb7u1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpqllJUB 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpqllJUB 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpqllJUB', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpqllJUB', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.9s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.9s DEBUG: Created policy-rc.d and chmodded it. 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'update'] 0m2.0s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m2.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'update'] 0m2.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpqllJUB/tmp/scripts/ 0m2.0s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpqllJUB/tmp/scripts/ 0m2.0s INFO: Running scripts post_chroot_unpack 0m2.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', '-yf', 'dist-upgrade'] 0m2.4s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', '-yf', 'dist-upgrade'] 0m2.4s INFO: Running scripts post_setup 0m2.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_experimental'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_experimental'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_forbid_home'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_forbid_home'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.7s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (2183 kB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'clean'] 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'clean'] 0m4.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--get-selections', '*'] 0m4.3s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m4.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--get-selections', '*'] 0m4.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg-divert', '--list'] 0m4.3s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m4.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg-divert', '--list'] 0m4.3s INFO: apt-cache does not know about any of the requested packages 0m4.3s INFO: Running scripts pre_test 0m4.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_test_root_password'] 0m4.3s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m4.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_test_root_password'] 0m4.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m4.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m5.3s DEBUG: No broken symlinks as far as we can find. 0m5.3s INFO: Running scripts pre_install 0m5.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_install_database-server'] 0m5.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_install_database-server'] 0m5.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_install_exceptions'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_install_exceptions'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_install_extras'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_install_extras'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-cache', 'show', 'umview-mod-umfuseiso9660=0.2b-1+b1'] 0m5.4s DUMP: Package: umview-mod-umfuseiso9660 Priority: optional Section: misc Installed-Size: 56 Maintainer: Debian VSquare Team Architecture: amd64 Source: fuse-umfuse-iso9660 (0.2b-1) Version: 0.2b-1+b1 Depends: libc6 (>= 2.2.5), libfuse2 (>= 2.6), libiso9660-7, libumlib0, zlib1g (>= 1:1.1.4) Filename: pool/main/f/fuse-umfuse-iso9660/umview-mod-umfuseiso9660_0.2b-1+b1_amd64.deb Size: 8494 MD5sum: 40fff50ac6052c8b653cfb46eb97c047 SHA1: bdede0216df832cb596e439052fdf3472e2ff7a8 SHA256: 9609eb57383b3953ca7c1f25af40633658184a2b5a29fed597f5973e34f5ec8a Description: View-OS in user space - ISO9660 module for UMFUSE View-OS is a novel approach to the process/kernel interface. The semantics of each system call can be assigned process by process giving the user the right to decide which view of the system each process has to join. Each process can "see" a different file system structure, networking resources, processor, devices. Moreover some of the resources can be provided by the user him/herself, thus these resource can be private to the single process and are not known a priori by the system. Groups of processes can share the same view but this is just an optimization to share management methods. . For more information, see http://wiki.virtualsquare.org . UMView is a user-mode implementation of View-OS. Processes are run with a controlling daemon that captures all the system calls (at present using the ptrace() system call) and uses dynamically loadable modules to change their semantic. . This package contains a sub-module for umfuse. umfuse is contained in the main UMView package and allows almost complete source compatibility with FUSE modules. umfuseiso9660 can be used to mount ISO-9660 CD images inside an UMView instance. Homepage: http://view-os.sourceforge.net 0m5.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-cache', 'show', 'umview-mod-umfuseiso9660=0.2b-1+b1'] 0m5.4s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.2.5), libfuse2 (>= 2.6), libiso9660-7, libumlib0, zlib1g (>= 1:1.1.4) 0m5.4s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp47yhgf/piuparts-depends-dummy'] 0m5.4s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp47yhgf/piuparts-depends-dummy.deb'. 0m5.4s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp47yhgf/piuparts-depends-dummy'] 0m5.4s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp47yhgf/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpqllJUB/tmp 0m5.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.5s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libfuse2 (>= 2.6); however: Package libfuse2 is not installed. piuparts-depends-dummy depends on libiso9660-7; however: Package libiso9660-7 is not installed. piuparts-depends-dummy depends on libumlib0; however: Package libumlib0 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m5.5s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', '-yf', 'install'] 0m7.2s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libcdio10 libfuse2 libiso9660-7 libumlib0 Suggested packages: fuse-utils The following NEW packages will be installed: libcdio10 libfuse2 libiso9660-7 libumlib0 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 438 kB of archives. After this operation, 877 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libfuse2 amd64 2.8.4-1.1 [143 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libcdio10 amd64 0.81-4 [159 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libiso9660-7 amd64 0.81-4 [126 kB] Get:4 http://mirror.bm.debian.org/debian/ squeeze/main libumlib0 amd64 0.6-1 [10.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 438 kB in 0s (636 kB/s) Selecting previously deselected package libfuse2. (Reading database ... 6261 files and directories currently installed.) Unpacking libfuse2 (from .../libfuse2_2.8.4-1.1_amd64.deb) ... Selecting previously deselected package libcdio10. Unpacking libcdio10 (from .../libcdio10_0.81-4_amd64.deb) ... Selecting previously deselected package libiso9660-7. Unpacking libiso9660-7 (from .../libiso9660-7_0.81-4_amd64.deb) ... Selecting previously deselected package libumlib0. Unpacking libumlib0 (from .../libumlib0_0.6-1_amd64.deb) ... Setting up libfuse2 (2.8.4-1.1) ... Setting up libcdio10 (0.81-4) ... Setting up libiso9660-7 (0.81-4) ... Setting up libumlib0 (0.6-1) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', '-yf', 'install'] 0m7.2s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m7.2s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpqllJUB/tmp/piuparts-depends-dummy.deb 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m7.2s DUMP: piuparts-depends-dummy install ok installed 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.3s DUMP: (Reading database ... 6297 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m7.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'clean'] 0m7.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'clean'] 0m7.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m8.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m8.9s DEBUG: No broken symlinks as far as we can find. 0m8.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-cache', 'policy'] 0m8.9s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m8.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-cache', 'policy'] 0m8.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-cache', 'policy', 'umview-mod-umfuseiso9660'] 0m8.9s DUMP: umview-mod-umfuseiso9660: Installed: (none) Candidate: 0.2b-1+b1 Version table: 0.2b-1+b1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m8.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-cache', 'policy', 'umview-mod-umfuseiso9660'] 0m8.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', '-y', 'install', 'umview-mod-umfuseiso9660=0.2b-1+b1'] 0m9.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: umview-mod-umfuseiso9660 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 8494 B of archives. After this operation, 57.3 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main umview-mod-umfuseiso9660 amd64 0.2b-1+b1 [8494 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 8494 B in 0s (76.1 kB/s) Selecting previously deselected package umview-mod-umfuseiso9660. (Reading database ... 6297 files and directories currently installed.) Unpacking umview-mod-umfuseiso9660 (from .../umview-mod-umfuseiso9660_0.2b-1+b1_amd64.deb) ... Setting up umview-mod-umfuseiso9660 (0.2b-1+b1) ... 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', '-y', 'install', 'umview-mod-umfuseiso9660=0.2b-1+b1'] 0m9.7s INFO: Running scripts post_install 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_install_exceptions'] 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_install_exceptions'] 0m9.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m10.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m10.8s DEBUG: No broken symlinks as far as we can find. 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--get-selections', '*'] 0m10.8s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcdio10 install libcomerr2 install libdb4.8 install libfuse2 install libgcc1 install libiso9660-7 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libumlib0 install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install umview-mod-umfuseiso9660 install util-linux install xz-utils install zlib1g install 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--get-selections', '*'] 0m11.3s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpqllJUB', '-ac'] 0m11.9s DUMP: debsums: no md5sums for mawk 0m11.9s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpqllJUB', '-ac'] 0m11.9s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m11.9s DUMP: 0.12~bpo70+1 0m11.9s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m11.9s INFO: Running adequate version 0.12~bpo70+1 now. 0m11.9s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'umview-mod-umfuseiso9660'] 0m12.0s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'umview-mod-umfuseiso9660'] 0m12.0s INFO: Running scripts pre_remove 0m12.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m12.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m12.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m12.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m12.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_exceptions'] 0m12.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/pre_remove_exceptions'] 0m12.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'remove', 'libfuse2', 'libumlib0', 'libiso9660-7', 'libcdio10', 'umview-mod-umfuseiso9660'] 0m12.9s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libcdio10 libfuse2 libiso9660-7 libumlib0 umview-mod-umfuseiso9660 0 upgraded, 0 newly installed, 5 to remove and 0 not upgraded. After this operation, 934 kB disk space will be freed. (Reading database ... 6303 files and directories currently installed.) Removing umview-mod-umfuseiso9660 ... Removing libiso9660-7 ... Removing libcdio10 ... Removing libfuse2 ... Removing libumlib0 ... 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'remove', 'libfuse2', 'libumlib0', 'libiso9660-7', 'libcdio10', 'umview-mod-umfuseiso9660'] 0m12.9s INFO: Running scripts post_remove 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_remove_exceptions_lenny'] 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_remove_exceptions_lenny'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_remove_extras'] 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_remove_extras'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--purge', 'libfuse2', 'libumlib0', 'libiso9660-7', 'libcdio10'] 0m12.9s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing libfuse2 ... Purging configuration files for libfuse2 ... Removing libumlib0 ... Purging configuration files for libumlib0 ... Removing libiso9660-7 ... Purging configuration files for libiso9660-7 ... Removing libcdio10 ... Purging configuration files for libcdio10 ... 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--purge', 'libfuse2', 'libumlib0', 'libiso9660-7', 'libcdio10'] 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--purge', 'umview-mod-umfuseiso9660'] 0m12.9s DUMP: dpkg: warning: ignoring request to remove umview-mod-umfuseiso9660 which isn't installed. 0m12.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--purge', 'umview-mod-umfuseiso9660'] 0m12.9s INFO: Running scripts post_purge 0m12.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_purge_exceptions'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'tmp/scripts/post_purge_exceptions'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--purge', '--pending'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--purge', '--pending'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--remove', '--pending'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg', '--remove', '--pending'] 0m13.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m13.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m14.0s DEBUG: No broken symlinks as far as we can find. 0m14.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg-divert', '--list'] 0m14.1s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m14.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'dpkg-divert', '--list'] 0m14.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'clean'] 0m14.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'apt-get', 'clean'] 0m15.0s INFO: PASS: Installation and purging test. 0m15.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'umount', '/proc'] 0m15.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpqllJUB', 'umount', '/proc'] 0m15.3s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m15.4s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpqllJUB'] 0m15.4s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpqllJUB 0m15.4s INFO: PASS: All tests. 0m15.4s INFO: piuparts run ends. ret=0 End: 2014-11-01 03:20:26 UTC