Start: 2014-02-06 16:20:11 UTC Package: verilog Priority: optional Section: electronics Installed-Size: 32 Maintainer: Debian Electronics Team Architecture: all Source: iverilog Version: 0.9.2-2 Depends: iverilog Filename: pool/main/i/iverilog/verilog_0.9.2-2_all.deb Size: 6042 MD5sum: 818532de44c0579c9f2e5dd148097c09 SHA1: 38b257ec68affab99afab8f688e2385068ef3681 SHA256: 4d06359250850da86a8fb288eef6f6013cd1c4d586821937d2ee4d861ffe3333 Description: Icarus verilog compiler (transitional package) Icarus Verilog is intended to compile all of the Verilog HDL as described in the IEEE-1364 standard. It is not quite there yet. It does currently handle a mix of structural and behavioral constructs. . The compiler can target either simulation, or netlist (EDIF). . This is a dummy transitional package that will ensure a proper upgrade path. This package may be safely removed after upgrading. Homepage: http://www.icarus.com/eda/verilog Tag: field::electronics, role::metapackage Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt verilog=0.9.2-2 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.57~201402051027~0.56-30-g8a43058 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt verilog=0.9.2-2 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpGjgNns 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpGjgNns 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpGjgNns', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpGjgNns', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'update'] 0m1.9s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'update'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpGjgNns/tmp/scripts/ 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmpGjgNns/tmp/scripts/ 0m2.3s INFO: Running scripts post_setup 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_setup_experimental'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_setup_experimental'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.1s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (0 B/s) Selecting previously deselected package adduser. (Reading database ... 6155 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'clean'] 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'clean'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--get-selections', '*'] 0m3.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--get-selections', '*'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg-divert', '--list'] 0m3.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg-divert', '--list'] 0m3.7s INFO: apt-cache does not know about any of the requested packages 0m3.7s INFO: Running scripts pre_test 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_test_root_password'] 0m3.7s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_test_root_password'] 0m3.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m4.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m4.7s DEBUG: No broken symlinks as far as we can find. 0m4.7s INFO: Running scripts pre_install 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_install_database-server'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_install_database-server'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_install_exceptions'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_install_exceptions'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-cache', 'show', 'verilog=0.9.2-2'] 0m4.8s DUMP: Package: verilog Priority: optional Section: electronics Installed-Size: 32 Maintainer: Debian Electronics Team Architecture: all Source: iverilog Version: 0.9.2-2 Depends: iverilog Filename: pool/main/i/iverilog/verilog_0.9.2-2_all.deb Size: 6042 MD5sum: 818532de44c0579c9f2e5dd148097c09 SHA1: 38b257ec68affab99afab8f688e2385068ef3681 SHA256: 4d06359250850da86a8fb288eef6f6013cd1c4d586821937d2ee4d861ffe3333 Description: Icarus verilog compiler (transitional package) Icarus Verilog is intended to compile all of the Verilog HDL as described in the IEEE-1364 standard. It is not quite there yet. It does currently handle a mix of structural and behavioral constructs. . The compiler can target either simulation, or netlist (EDIF). . This is a dummy transitional package that will ensure a proper upgrade path. This package may be safely removed after upgrading. Homepage: http://www.icarus.com/eda/verilog Tag: field::electronics, role::metapackage 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-cache', 'show', 'verilog=0.9.2-2'] 0m4.8s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: iverilog 0m4.8s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpuFLAbL/piuparts-depends-dummy'] 0m4.8s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmpuFLAbL/piuparts-depends-dummy.deb'. 0m4.8s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmpuFLAbL/piuparts-depends-dummy'] 0m4.8s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmpuFLAbL/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmpGjgNns/tmp 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.8s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6278 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on iverilog; however: Package iverilog is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m4.8s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', '-yf', 'install'] 0m5.7s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: iverilog Suggested packages: gtkwave The following NEW packages will be installed: iverilog 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 1419 kB of archives. After this operation, 3817 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main iverilog amd64 0.9.2-2 [1419 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1419 kB in 0s (16.2 MB/s) Selecting previously deselected package iverilog. (Reading database ... 6278 files and directories currently installed.) Unpacking iverilog (from .../iverilog_0.9.2-2_amd64.deb) ... Setting up iverilog (0.9.2-2) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', '-yf', 'install'] 0m5.7s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m5.7s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmpGjgNns/tmp/piuparts-depends-dummy.deb 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.7s DUMP: (Reading database ... 6352 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m5.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'clean'] 0m5.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'clean'] 0m6.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m6.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m7.1s DEBUG: No broken symlinks as far as we can find. 0m7.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-cache', 'policy'] 0m7.2s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.8,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-cache', 'policy'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-cache', 'policy', 'verilog'] 0m7.2s DUMP: verilog: Installed: (none) Candidate: 0.9.2-2 Version table: 0.9.2-2 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-cache', 'policy', 'verilog'] 0m7.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', '-y', 'install', 'verilog=0.9.2-2'] 0m7.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: verilog 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 6042 B of archives. After this operation, 32.8 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main verilog all 0.9.2-2 [6042 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 6042 B in 0s (580 kB/s) Selecting previously deselected package verilog. (Reading database ... 6352 files and directories currently installed.) Unpacking verilog (from .../verilog_0.9.2-2_all.deb) ... Setting up verilog (0.9.2-2) ... 0m7.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', '-y', 'install', 'verilog=0.9.2-2'] 0m7.8s INFO: Running scripts post_install 0m7.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m8.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m8.8s DEBUG: No broken symlinks as far as we can find. 0m8.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--get-selections', '*'] 0m8.8s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install iverilog install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install verilog install xz-utils install zlib1g install 0m8.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--get-selections', '*'] 0m9.4s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpGjgNns', '-ac'] 0m9.9s DUMP: debsums: no md5sums for mawk 0m9.9s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpGjgNns', '-ac'] 0m9.9s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.0s DUMP: 0.11.3~bpo70+1 0m10.0s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.0s INFO: Running adequate version 0.11.3~bpo70+1 now. 0m10.0s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'verilog'] 0m10.1s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'verilog'] 0m10.1s INFO: Running scripts pre_remove 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_exceptions'] 0m10.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/pre_remove_exceptions'] 0m10.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'remove', 'iverilog', 'verilog'] 0m10.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: iverilog verilog 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. After this operation, 3850 kB disk space will be freed. (Reading database ... 6355 files and directories currently installed.) Removing verilog ... Removing iverilog ... 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'remove', 'iverilog', 'verilog'] 0m10.8s INFO: Running scripts post_remove 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_remove_exceptions_lenny'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--purge', 'iverilog'] 0m10.8s DUMP: dpkg: warning: ignoring request to remove iverilog which isn't installed. 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--purge', 'iverilog'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--purge', 'verilog'] 0m10.9s DUMP: dpkg: warning: ignoring request to remove verilog which isn't installed. 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--purge', 'verilog'] 0m10.9s INFO: Running scripts post_purge 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_purge_exceptions'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'tmp/scripts/post_purge_exceptions'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--purge', '--pending'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--purge', '--pending'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--remove', '--pending'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg', '--remove', '--pending'] 0m10.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m11.1s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m11.9s DEBUG: No broken symlinks as far as we can find. 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg-divert', '--list'] 0m11.9s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash diversion of /bin/sh to /bin/sh.distrib by dash 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'dpkg-divert', '--list'] 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'clean'] 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'apt-get', 'clean'] 0m12.9s INFO: PASS: Installation and purging test. 0m13.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'umount', '/proc'] 0m13.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpGjgNns', 'umount', '/proc'] 0m13.2s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m13.2s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpGjgNns'] 0m13.2s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpGjgNns 0m13.2s INFO: PASS: All tests. 0m13.2s INFO: piuparts run ends. ret=0 End: 2014-02-06 16:20:25 UTC