Start: 2014-10-06 23:23:36 UTC Package: wcalc Priority: optional Section: math Installed-Size: 328 Maintainer: Daniele Sempione Architecture: amd64 Source: wcalc (2.4-1) Version: 2.4-1+b1 Depends: libc6 (>= 2.3), libgmp3c2, libmpfr4, libreadline5 (>= 5.2) Filename: pool/main/w/wcalc/wcalc_2.4-1+b1_amd64.deb Size: 137160 MD5sum: 2212103e3da79ab98b1417dfb065424e SHA1: dddf9d975a758ba3d639cecdc171202a8a1aed56 SHA256: 8f942c709b2bb63367d8632f99de82edee229dbe647a6c96327b60492a7132e1 Description: A flexible command-line scientific calculator Wcalc is a very capable calculator. It has standard functions (sin, asin, and sinh for example, in either radians or degrees), many pre-defined constants (pi, e, c, etc.), support for using variables, "active" variables, a command history, hex/octal/binary input and output, unit conversions, embedded comments, and an expandable expression entry field. It evaluates expressions using the standard order of operations. . Wcalc uses intuitive expressions. For example, Wcalc will evaluate: 5sin 4!-7*2(4%6)^2 to be -221.96631678 Tag: field::mathematics, implemented-in::c, interface::commandline, role::program Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 35m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt wcalc=2.4-1+b1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.59 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --scriptsdir /etc/piuparts/scripts-squeeze --warn-on-debsums-errors --mirror 'http://mirror.bm.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze --no-upgrade-test --apt wcalc=2.4-1+b1 0m0.0s INFO: Running on: Linux piu-slave-bm-a 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmphdG52y 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmphdG52y 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmphdG52y', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DUMP: tar: ./proc: time stamp 2014-10-15 13:49:47 is 743169.738134941 s in the future 0m1.8s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmphdG52y', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'mount', '-t', 'proc', 'proc', '/proc'] 0m1.8s DEBUG: sources.list: deb http://mirror.bm.debian.org/debian/ squeeze main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'update'] 0m1.9s DUMP: Hit http://mirror.bm.debian.org squeeze Release.gpg Ign http://mirror.bm.debian.org/debian/ squeeze/main Translation-en Hit http://mirror.bm.debian.org squeeze Release Hit http://mirror.bm.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'update'] 0m1.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', '-yf', 'dist-upgrade'] 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmphdG52y/tmp/scripts/ 0m2.3s DEBUG: Copying scriptsdir /etc/piuparts/scripts-squeeze to /srv/piuparts.debian.org/tmp/tmphdG52y/tmp/scripts/ 0m2.3s INFO: Running scripts post_setup 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_experimental'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_experimental'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_forbid_home'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.2s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (29.0 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m3.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_setup_squeeze-fake-essential'] 0m3.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'clean'] 0m3.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'clean'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--get-selections', '*'] 0m3.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install xz-utils install zlib1g install 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--get-selections', '*'] 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg-divert', '--list'] 0m3.7s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m3.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg-divert', '--list'] 0m3.7s INFO: apt-cache does not know about any of the requested packages 0m3.7s INFO: Running scripts pre_test 0m3.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_test_root_password'] 0m3.8s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_test_root_password'] 0m3.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m4.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m4.8s DEBUG: No broken symlinks as far as we can find. 0m4.8s INFO: Running scripts pre_install 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_install_database-server'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_install_database-server'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_install_exceptions'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_install_exceptions'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_install_extras'] 0m4.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_install_extras'] 0m4.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-cache', 'show', 'wcalc=2.4-1+b1'] 0m4.9s DUMP: Package: wcalc Priority: optional Section: math Installed-Size: 328 Maintainer: Daniele Sempione Architecture: amd64 Source: wcalc (2.4-1) Version: 2.4-1+b1 Depends: libc6 (>= 2.3), libgmp3c2, libmpfr4, libreadline5 (>= 5.2) Filename: pool/main/w/wcalc/wcalc_2.4-1+b1_amd64.deb Size: 137160 MD5sum: 2212103e3da79ab98b1417dfb065424e SHA1: dddf9d975a758ba3d639cecdc171202a8a1aed56 SHA256: 8f942c709b2bb63367d8632f99de82edee229dbe647a6c96327b60492a7132e1 Description: A flexible command-line scientific calculator Wcalc is a very capable calculator. It has standard functions (sin, asin, and sinh for example, in either radians or degrees), many pre-defined constants (pi, e, c, etc.), support for using variables, "active" variables, a command history, hex/octal/binary input and output, unit conversions, embedded comments, and an expandable expression entry field. It evaluates expressions using the standard order of operations. . Wcalc uses intuitive expressions. For example, Wcalc will evaluate: 5sin 4!-7*2(4%6)^2 to be -221.96631678 Tag: field::mathematics, implemented-in::c, interface::commandline, role::program 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-cache', 'show', 'wcalc=2.4-1+b1'] 0m4.9s DEBUG: metapackage: Package: piuparts-depends-dummy Version: 0.invalid.0 Architecture: all Maintainer: piuparts developers team Description: Dummy package to satisfy dependencies - created by piuparts This package was created automatically by piuparts and can safely be removed Depends: libc6 (>= 2.3), libgmp3c2, libmpfr4, libreadline5 (>= 5.2) 0m4.9s DEBUG: Starting command: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp86PZcY/piuparts-depends-dummy'] 0m4.9s DUMP: dpkg-deb: warning: not checking contents of control area dpkg-deb: building an unknown package in '/srv/piuparts.debian.org/tmp/tmp86PZcY/piuparts-depends-dummy.deb'. 0m4.9s DEBUG: Command ok: ['dpkg-deb', '-b', '-Zgzip', '--nocheck', '/srv/piuparts.debian.org/tmp/tmp86PZcY/piuparts-depends-dummy'] 0m4.9s DEBUG: Copying /srv/piuparts.debian.org/tmp/tmp86PZcY/piuparts-depends-dummy.deb to /srv/piuparts.debian.org/tmp/tmphdG52y/tmp 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.0s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6261 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libgmp3c2; however: Package libgmp3c2 is not installed. piuparts-depends-dummy depends on libmpfr4; however: Package libmpfr4 is not installed. piuparts-depends-dummy depends on libreadline5 (>= 5.2); however: Package libreadline5 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m5.0s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m5.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', '-yf', 'install'] 0m6.0s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libgmp3c2 libmpfr4 libreadline5 The following NEW packages will be installed: libgmp3c2 libmpfr4 libreadline5 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 933 kB of archives. After this operation, 1806 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main libgmp3c2 amd64 2:4.3.2+dfsg-1 [313 kB] Get:2 http://mirror.bm.debian.org/debian/ squeeze/main libmpfr4 amd64 3.0.0-2 [474 kB] Get:3 http://mirror.bm.debian.org/debian/ squeeze/main libreadline5 amd64 5.2-7 [146 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 933 kB in 0s (4569 kB/s) Selecting previously deselected package libgmp3c2. (Reading database ... 6261 files and directories currently installed.) Unpacking libgmp3c2 (from .../libgmp3c2_2%3a4.3.2+dfsg-1_amd64.deb) ... Selecting previously deselected package libmpfr4. Unpacking libmpfr4 (from .../libmpfr4_3.0.0-2_amd64.deb) ... Selecting previously deselected package libreadline5. Unpacking libreadline5 (from .../libreadline5_5.2-7_amd64.deb) ... Setting up libgmp3c2 (2:4.3.2+dfsg-1) ... Setting up libmpfr4 (3.0.0-2) ... Setting up libreadline5 (5.2-7) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', '-yf', 'install'] 0m6.0s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m6.0s DEBUG: Removing /srv/piuparts.debian.org/tmp/tmphdG52y/tmp/piuparts-depends-dummy.deb 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m6.0s DUMP: piuparts-depends-dummy install ok installed 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg-query', '-f', '${Package} ${Status}\n', '-W', 'piuparts-depends-dummy'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.0s DUMP: (Reading database ... 6294 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m6.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m6.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'clean'] 0m6.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'clean'] 0m6.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m6.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m7.7s DEBUG: No broken symlinks as far as we can find. 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-cache', 'policy'] 0m7.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldstable,n=squeeze,l=Debian,c=main origin mirror.bm.debian.org Pinned packages: 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-cache', 'policy'] 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-cache', 'policy', 'wcalc'] 0m7.7s DUMP: wcalc: Installed: (none) Candidate: 2.4-1+b1 Version table: 2.4-1+b1 0 500 http://mirror.bm.debian.org/debian/ squeeze/main amd64 Packages 0m7.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-cache', 'policy', 'wcalc'] 0m7.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', '-y', 'install', 'wcalc=2.4-1+b1'] 0m8.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: wcalc 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 137 kB of archives. After this operation, 336 kB of additional disk space will be used. Get:1 http://mirror.bm.debian.org/debian/ squeeze/main wcalc amd64 2.4-1+b1 [137 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 137 kB in 0s (1466 kB/s) Selecting previously deselected package wcalc. (Reading database ... 6294 files and directories currently installed.) Unpacking wcalc (from .../wcalc_2.4-1+b1_amd64.deb) ... Setting up wcalc (2.4-1+b1) ... 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', '-y', 'install', 'wcalc=2.4-1+b1'] 0m8.5s INFO: Running scripts post_install 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_install_exceptions'] 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_install_exceptions'] 0m8.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m8.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m9.7s DEBUG: No broken symlinks as far as we can find. 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--get-selections', '*'] 0m9.7s DUMP: adduser install apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install libgmp3c2 install liblocale-gettext-perl install liblzma2 install libmpfr4 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline5 install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install ucf install util-linux install wcalc install xz-utils install zlib1g install 0m9.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--get-selections', '*'] 0m10.3s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmphdG52y', '-ac'] 0m10.8s DUMP: debsums: no md5sums for mawk 0m10.8s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmphdG52y', '-ac'] 0m10.8s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.8s DUMP: 0.12~bpo70+1 0m10.8s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m10.8s INFO: Running adequate version 0.12~bpo70+1 now. 0m10.8s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'wcalc'] 0m11.0s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'wcalc'] 0m11.0s INFO: Running scripts pre_remove 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m11.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m11.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_exceptions'] 0m11.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/pre_remove_exceptions'] 0m11.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'remove', 'libgmp3c2', 'libreadline5', 'libmpfr4', 'wcalc'] 0m11.8s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libgmp3c2 libmpfr4 libreadline5 wcalc 0 upgraded, 0 newly installed, 4 to remove and 0 not upgraded. After this operation, 2142 kB disk space will be freed. (Reading database ... 6306 files and directories currently installed.) Removing wcalc ... Removing libmpfr4 ... Removing libgmp3c2 ... Removing libreadline5 ... 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'remove', 'libgmp3c2', 'libreadline5', 'libmpfr4', 'wcalc'] 0m11.8s INFO: Running scripts post_remove 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_remove_exceptions_lenny'] 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_remove_extras'] 0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_remove_extras'] 0m11.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--purge', 'libgmp3c2', 'libreadline5', 'libmpfr4'] 0m11.9s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing libgmp3c2 ... Purging configuration files for libgmp3c2 ... Removing libreadline5 ... Purging configuration files for libreadline5 ... Removing libmpfr4 ... Purging configuration files for libmpfr4 ... 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--purge', 'libgmp3c2', 'libreadline5', 'libmpfr4'] 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--purge', 'wcalc'] 0m11.9s DUMP: (Reading database ... 6261 files and directories currently installed.) Removing wcalc ... Purging configuration files for wcalc ... 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--purge', 'wcalc'] 0m11.9s INFO: Running scripts post_purge 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_purge_exceptions'] 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'tmp/scripts/post_purge_exceptions'] 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--purge', '--pending'] 0m11.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--purge', '--pending'] 0m11.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--remove', '--pending'] 0m12.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg', '--remove', '--pending'] 0m12.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m12.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m13.0s DEBUG: No broken symlinks as far as we can find. 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg-divert', '--list'] 0m13.0s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'dpkg-divert', '--list'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'clean'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'apt-get', 'clean'] 0m14.5s INFO: PASS: Installation and purging test. 0m14.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'umount', '/proc'] 0m14.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmphdG52y', 'umount', '/proc'] 0m14.7s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m14.8s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmphdG52y'] 0m14.8s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmphdG52y 0m14.8s INFO: PASS: All tests. 0m14.8s INFO: piuparts run ends. ret=0 End: 2014-10-06 23:23:51 UTC