Start: 2017-12-08 14:13:50 UTC [squeeze] Package: libsnmp-info-perl Priority: optional Section: perl Installed-Size: 1604 Maintainer: Debian Perl Group Architecture: all Version: 2.01-1 Depends: perl (>= 5.6.0-16), libsnmp-perl (>= 5.1) Suggests: netdisco-mibs-installer Filename: pool/main/libs/libsnmp-info-perl/libsnmp-info-perl_2.01-1_all.deb Size: 482772 MD5sum: 3d44fb5b1f828d2babfbb6660d97ddc5 SHA1: f7569c7b21c6c96bcbde703e4fae79f768b25614 SHA256: 0a71fedc402409d81ca5b327008dcff521ace636cf38776a3151b99195d1e302 Description: Object Oriented Perl5 Interface to Network devices and MIBs through SNMP SNMP::Info gives an object oriented interface to information obtained through SNMP. . The idea behind this module is to give a common interface to data from network devices, leaving the device-specific hacks behind the scenes in subclasses. . The interface avoids use of OIDs in favour of methods representing leaf names, either for single values or tables represented as Perl hashes. . Information is grouped more logically than in the MIB trees. Adding support for new devices is easy, and takes little or no SNMP knowledge. Homepage: http://snmp-info.sourceforge.net Tag: devel::lang:perl, devel::library, implemented-in::perl, protocol::snmp, role::shared-lib [wheezy-lts] Package: libsnmp-info-perl Version: 2.06-1 Installed-Size: 1433 Maintainer: Debian Perl Group Architecture: all Depends: perl, libsnmp-perl Suggests: netdisco-mibs-installer Description: Object Oriented Perl5 Interface to Network devices and MIBs through SNMP Homepage: http://snmp-info.sourceforge.net Description-md5: cb7be57c3df4953327ca133605eacc30 Tag: devel::lang:perl, devel::library, implemented-in::perl, protocol::snmp Section: perl Priority: optional Filename: pool/main/libs/libsnmp-info-perl/libsnmp-info-perl_2.06-1_all.deb Size: 524238 MD5sum: c9ae2f157bbfce9686db9b465ace2e67 SHA1: 555a4404b10b1cfeb2c95a626f2457abe0233625 SHA256: 09f764f483c19074261342d63355d4c46f514aab9cda903f6cdd6a92d1ca09af Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python2.7/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --no-check-valid-until --scriptsdir /etc/piuparts/scripts-wheezy --warn-on-debsums-errors --warn-on-install-over-symlink --mirror 'http://mirror-ubc.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze -d wheezy-lts -B reference-chroot-metadata.dat --apt libsnmp-info-perl=2.06-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.83~201711291402~0.82-24-gd0ad6d8b starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --skip-logrotatefiles-test --warn-on-others --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge -i /etc/shells --no-check-valid-until --scriptsdir /etc/piuparts/scripts-wheezy --warn-on-debsums-errors --warn-on-install-over-symlink --mirror 'http://mirror-ubc.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz -d squeeze -d wheezy-lts -B reference-chroot-metadata.dat --apt libsnmp-info-perl=2.06-1 0m0.0s INFO: Running on: Linux piu-slave-ubc-01 4.9.0-4-amd64 #1 SMP Debian 4.9.51-1 (2017-09-28) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpZiXO6E 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpZiXO6E 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.3s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/squeeze_amd64.tar.gz'] 0m1.3s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/proc'] 0m1.4s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/proc'] 0m1.4s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/pts'] 0m1.4s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/pts'] 0m1.4s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/ptmx'] 0m1.4s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/ptmx'] 0m1.4s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/2', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/console'] 0m1.4s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/2', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/console'] 0m1.4s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/shm'] 0m1.4s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/shm'] 0m1.4s DEBUG: sources.list: deb http://archive.debian.org/debian squeeze main 0m1.4s DEBUG: Created policy-rc.d and chmodded it. 0m1.4s DEBUG: Created resolv.conf. 0m1.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpZiXO6E/tmp/scripts/ 0m1.4s DEBUG: Copying scriptsdir /etc/piuparts/scripts-wheezy to /srv/piuparts.debian.org/tmp/tmpZiXO6E/tmp/scripts/ 0m1.4s INFO: Running scripts post_chroot_unpack 0m1.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', 'update'] 0m1.4s DUMP: Hit http://archive.debian.org squeeze Release.gpg Ign http://archive.debian.org/debian/ squeeze/main Translation-en Hit http://archive.debian.org squeeze Release Hit http://archive.debian.org squeeze/main amd64 Packages Reading package lists... 0m1.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', 'update'] 0m1.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-yf', 'dist-upgrade'] 0m1.6s DUMP: Reading package lists... Building dependency tree... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m1.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-yf', 'dist-upgrade'] 0m1.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m1.7s DUMP: 6a0e4d3b374fdc6be02fc5f39fbf3166 - 0m1.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m1.7s INFO: Running scripts post_setup 0m1.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_dummy_users'] 0m2.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_dummy_users'] 0m2.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_forbid_home'] 0m2.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_forbid_home'] 0m2.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_force-unsafe-io'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_minimize'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_minimize'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_squeeze-backports'] 0m2.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_wheezy-fake-essential'] 0m2.6s DUMP: *** Adding fake essential packages *** Reading package lists... Building dependency tree... Suggested packages: perl-modules The following NEW packages will be installed: adduser ucf 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 320 kB of archives. After this operation, 1532 kB of additional disk space will be used. Get:1 http://archive.debian.org/debian/ squeeze/main adduser all 3.112+nmu2 [250 kB] Get:2 http://archive.debian.org/debian/ squeeze/main ucf all 3.0025+nmu1 [69.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 320 kB in 0s (28.9 MB/s) Selecting previously deselected package adduser. (Reading database ... 6138 files and directories currently installed.) Unpacking adduser (from .../adduser_3.112+nmu2_all.deb) ... Selecting previously deselected package ucf. Unpacking ucf (from .../ucf_3.0025+nmu1_all.deb) ... Moving old data out of the way Setting up adduser (3.112+nmu2) ... Setting up ucf (3.0025+nmu1) ... 0m2.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_wheezy-fake-essential'] 0m2.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_zz_backports'] 0m2.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_setup_zz_backports'] 0m2.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m2.6s DUMP: install ok installed adduser 3.112+nmu2 install ok installed apt 0.8.10.3+squeeze1 install ok installed base-files 6.0squeeze10 install ok installed base-passwd 3.5.22 install ok installed bash 4.1-3 install ok installed bsdutils 1:2.17.2-9 install ok installed coreutils 8.5-1 install ok installed dash 0.5.5.1-7.4 install ok installed debconf 1.5.36.1 install ok installed debconf-i18n 1.5.36.1 install ok installed debian-archive-keyring 2010.08.28+squeeze1 install ok installed debianutils 3.4 install ok installed diffutils 1:3.0-1 install ok installed dpkg 1.15.11 install ok installed e2fslibs 1.41.12-4stable1 install ok installed e2fsprogs 1.41.12-4stable1 install ok installed findutils 4.4.2-1+b1 install ok installed gcc-4.4-base 4.4.5-8 install ok installed gnupg 1.4.10-4+squeeze4 install ok installed gpgv 1.4.10-4+squeeze4 install ok installed grep 2.6.3-3+squeeze1 install ok installed gzip 1.3.12-9+squeeze1 install ok installed hostname 3.04 install ok installed initscripts 2.88dsf-13.1+squeeze1 install ok installed insserv 1.14.0-2 install ok installed libacl1 2.2.49-4 install ok installed libattr1 1:2.4.44-2 install ok installed libblkid1 2.17.2-9 install ok installed libbz2-1.0 1.0.5-6+squeeze1 install ok installed libc-bin 2.11.3-4 install ok installed libc6 2.11.3-4 install ok installed libcomerr2 1.41.12-4stable1 install ok installed libdb4.8 4.8.30-2 install ok installed libgcc1 1:4.4.5-8 install ok installed liblocale-gettext-perl 1.05-6 install ok installed liblzma2 5.0.0-2 install ok installed libncurses5 5.7+20100313-5 install ok installed libpam-modules 1.1.1-6.1+squeeze1 install ok installed libpam-runtime 1.1.1-6.1+squeeze1 install ok installed libpam0g 1.1.1-6.1+squeeze1 install ok installed libreadline6 6.1-3 install ok installed libselinux1 2.0.96-1 install ok installed libsepol1 2.0.41-1 install ok installed libslang2 2.2.2-4 install ok installed libss2 1.41.12-4stable1 install ok installed libstdc++6 4.4.5-8 install ok installed libtext-charwidth-perl 0.04-6 install ok installed libtext-iconv-perl 1.7-2 install ok installed libtext-wrapi18n-perl 0.06-7 install ok installed libusb-0.1-4 2:0.1.12-16 install ok installed libuuid1 2.17.2-9 install ok installed login 1:4.1.4.2+svn3283-2+squeeze1 install ok installed lsb-base 3.2-23.2squeeze1 install ok installed mawk 1.3.3-15 install ok installed mount 2.17.2-9 install ok installed ncurses-base 5.7+20100313-5 install ok installed ncurses-bin 5.7+20100313-5 install ok installed passwd 1:4.1.4.2+svn3283-2+squeeze1 install ok installed perl-base 5.10.1-17squeeze6 install ok installed readline-common 6.1-3 install ok installed sed 4.2.1-7 install ok installed sensible-utils 0.0.4 install ok installed sysv-rc 2.88dsf-13.1+squeeze1 install ok installed sysvinit 2.88dsf-13.1+squeeze1 install ok installed sysvinit-utils 2.88dsf-13.1+squeeze1 install ok installed tar 1.23-3 install ok installed tzdata 2014e-0squeeze1 install ok installed ucf 3.0025+nmu1 install ok installed util-linux 2.17.2-9 install ok installed xz-utils 5.0.0-2 install ok installed zlib1g 1:1.2.3.4.dfsg-3 0m2.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m2.6s DEBUG: Loading chroot meta data from reference-chroot-metadata.dat 0m3.1s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m3.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m3.4s INFO: Running scripts is_testable 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/is_testable_uninstallable'] 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/is_testable_uninstallable'] 0m3.4s INFO: Running scripts pre_test 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_test_exceptions'] 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_test_exceptions'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_test_root_password'] 0m3.4s DUMP: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_test_root_password'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'show', 'libsnmp-info-perl'] 0m3.4s DUMP: Package: libsnmp-info-perl Priority: optional Section: perl Installed-Size: 1604 Maintainer: Debian Perl Group Architecture: all Version: 2.01-1 Depends: perl (>= 5.6.0-16), libsnmp-perl (>= 5.1) Suggests: netdisco-mibs-installer Filename: pool/main/libs/libsnmp-info-perl/libsnmp-info-perl_2.01-1_all.deb Size: 482772 MD5sum: 3d44fb5b1f828d2babfbb6660d97ddc5 SHA1: f7569c7b21c6c96bcbde703e4fae79f768b25614 SHA256: 0a71fedc402409d81ca5b327008dcff521ace636cf38776a3151b99195d1e302 Description: Object Oriented Perl5 Interface to Network devices and MIBs through SNMP SNMP::Info gives an object oriented interface to information obtained through SNMP. . The idea behind this module is to give a common interface to data from network devices, leaving the device-specific hacks behind the scenes in subclasses. . The interface avoids use of OIDs in favour of methods representing leaf names, either for single values or tables represented as Perl hashes. . Information is grouped more logically than in the MIB trees. Adding support for new devices is easy, and takes little or no SNMP knowledge. Homepage: http://snmp-info.sourceforge.net Tag: devel::lang:perl, devel::library, implemented-in::perl, protocol::snmp, role::shared-lib 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'show', 'libsnmp-info-perl'] 0m3.4s INFO: apt-cache knows about the following packages: libsnmp-info-perl 0m3.4s INFO: Running scripts pre_install 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_database-server'] 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_database-server'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_exceptions'] 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_exceptions'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_extras'] 0m3.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_extras'] 0m3.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture'] 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy'] 0m3.5s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.debian.org/debian/ squeeze/main amd64 Packages release v=6.0.10,o=Debian,a=oldoldstable,n=squeeze,l=Debian,c=main origin archive.debian.org Pinned packages: 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy', 'libsnmp-info-perl'] 0m3.5s DUMP: libsnmp-info-perl: Installed: (none) Candidate: 2.01-1 Version table: 2.01-1 0 500 http://archive.debian.org/debian/ squeeze/main amd64 Packages 0m3.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy', 'libsnmp-info-perl'] 0m3.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-y', 'install', 'libsnmp-info-perl'] 0m6.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: libdb4.7 libgdbm3 libperl5.10 libsensors4 libsnmp-base libsnmp-perl libsnmp15 libssl0.9.8 libwrap0 makedev perl perl-modules Suggested packages: snmp-mibs-downloader netdisco-mibs-installer perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make Recommended packages: lm-sensors tcpd netbase The following NEW packages will be installed: libdb4.7 libgdbm3 libperl5.10 libsensors4 libsnmp-base libsnmp-info-perl libsnmp-perl libsnmp15 libssl0.9.8 libwrap0 makedev perl perl-modules 0 upgraded, 13 newly installed, 0 to remove and 0 not upgraded. Need to get 13.8 MB of archives. After this operation, 47.7 MB of additional disk space will be used. Get:1 http://archive.debian.org/debian/ squeeze/main libgdbm3 amd64 1.8.3-9 [46.2 kB] Get:2 http://archive.debian.org/debian/ squeeze/main libssl0.9.8 amd64 0.9.8o-4squeeze14 [1002 kB] Get:3 http://archive.debian.org/debian/ squeeze/main libdb4.7 amd64 4.7.25-9 [662 kB] Get:4 http://archive.debian.org/debian/ squeeze/main perl-modules all 5.10.1-17squeeze6 [3482 kB] Get:5 http://archive.debian.org/debian/ squeeze/main perl amd64 5.10.1-17squeeze6 [4462 kB] Get:6 http://archive.debian.org/debian/ squeeze/main libperl5.10 amd64 5.10.1-17squeeze6 [1160 B] Get:7 http://archive.debian.org/debian/ squeeze/main makedev all 2.3.1-89 [42.4 kB] Get:8 http://archive.debian.org/debian/ squeeze/main libsensors4 amd64 1:3.1.2-6+squeeze1 [54.5 kB] Get:9 http://archive.debian.org/debian/ squeeze/main libsnmp-base all 5.4.3~dfsg-2+squeeze1 [1097 kB] Get:10 http://archive.debian.org/debian/ squeeze/main libwrap0 amd64 7.6.q-19 [51.2 kB] Get:11 http://archive.debian.org/debian/ squeeze/main libsnmp15 amd64 5.4.3~dfsg-2+squeeze1 [2234 kB] Get:12 http://archive.debian.org/debian/ squeeze/main libsnmp-perl amd64 5.4.3~dfsg-2+squeeze1 [145 kB] Get:13 http://archive.debian.org/debian/ squeeze/main libsnmp-info-perl all 2.01-1 [483 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 13.8 MB in 0s (59.9 MB/s) Selecting previously deselected package libgdbm3. (Reading database ... 6261 files and directories currently installed.) Unpacking libgdbm3 (from .../libgdbm3_1.8.3-9_amd64.deb) ... Selecting previously deselected package libssl0.9.8. Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8o-4squeeze14_amd64.deb) ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.1-17squeeze6_all.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.1-17squeeze6_amd64.deb) ... Selecting previously deselected package libperl5.10. Unpacking libperl5.10 (from .../libperl5.10_5.10.1-17squeeze6_amd64.deb) ... Selecting previously deselected package makedev. Unpacking makedev (from .../makedev_2.3.1-89_all.deb) ... update-rc.d: using dependency based boot sequencing Selecting previously deselected package libsensors4. Unpacking libsensors4 (from .../libsensors4_1%3a3.1.2-6+squeeze1_amd64.deb) ... Selecting previously deselected package libsnmp-base. Unpacking libsnmp-base (from .../libsnmp-base_5.4.3~dfsg-2+squeeze1_all.deb) ... Selecting previously deselected package libwrap0. Unpacking libwrap0 (from .../libwrap0_7.6.q-19_amd64.deb) ... Selecting previously deselected package libsnmp15. Unpacking libsnmp15 (from .../libsnmp15_5.4.3~dfsg-2+squeeze1_amd64.deb) ... Selecting previously deselected package libsnmp-perl. Unpacking libsnmp-perl (from .../libsnmp-perl_5.4.3~dfsg-2+squeeze1_amd64.deb) ... Selecting previously deselected package libsnmp-info-perl. Unpacking libsnmp-info-perl (from .../libsnmp-info-perl_2.01-1_all.deb) ... Setting up libgdbm3 (1.8.3-9) ... Setting up libssl0.9.8 (0.9.8o-4squeeze14) ... Setting up libdb4.7 (4.7.25-9) ... Setting up libperl5.10 (5.10.1-17squeeze6) ... Setting up makedev (2.3.1-89) ... mv: cannot move `console-' to `console': Device or resource busy makedev console c 5 1 root tty 0600: failed Setting up libsensors4 (1:3.1.2-6+squeeze1) ... Setting up libsnmp-base (5.4.3~dfsg-2+squeeze1) ... Setting up libwrap0 (7.6.q-19) ... Setting up libsnmp15 (5.4.3~dfsg-2+squeeze1) ... Setting up perl-modules (5.10.1-17squeeze6) ... Setting up perl (5.10.1-17squeeze6) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode. Setting up libsnmp-perl (5.4.3~dfsg-2+squeeze1) ... Setting up libsnmp-info-perl (2.01-1) ... 0m6.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-y', 'install', 'libsnmp-info-perl'] 0m6.5s INFO: Running scripts post_install 0m6.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_install_exceptions'] 0m6.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_install_exceptions'] 0m6.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m6.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m6.9s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmpZiXO6E to wheezy-lts 0m6.9s DEBUG: sources.list: deb http://mirror-ubc.debian.org/debian/ wheezy main deb http://security.debian.org wheezy/updates main 0m6.9s INFO: Running scripts pre_distupgrade 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_exceptions'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_exceptions'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_wheezy'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_wheezy'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m6.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m6.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', 'update'] 0m8.5s DUMP: Get:1 http://mirror-ubc.debian.org wheezy Release.gpg [2373 B] Ign http://mirror-ubc.debian.org/debian/ wheezy/main Translation-en Get:2 http://mirror-ubc.debian.org wheezy Release [191 kB] Get:3 http://mirror-ubc.debian.org wheezy/main amd64 Packages [7634 kB] Get:4 http://security.debian.org wheezy/updates Release.gpg [1601 B] Ign http://security.debian.org/ wheezy/updates/main Translation-en Get:5 http://security.debian.org wheezy/updates Release [39.0 kB] Get:6 http://security.debian.org wheezy/updates/main amd64 Packages [739 kB] Fetched 8607 kB in 0s (10.3 MB/s) Reading package lists... W: There is no public key available for the following key IDs: 7638D0442B90D010 W: There is no public key available for the following key IDs: 9D6D8F6BC857C906 0m8.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', 'update'] 0m8.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-yf', 'dist-upgrade'] 0m29.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libperl5.10 The following NEW packages will be installed: gcc-4.7-base libapt-pkg4.12 libclass-isa-perl libdb5.1 liblzma5 libmount1 libpam-modules-bin libperl5.14 libsemanage-common libsemanage1 libssl1.0.0 libswitch-perl libtinfo5 libustr-1.0-1 multiarch-support The following packages will be upgraded: adduser apt base-files base-passwd bash bsdutils coreutils dash debconf debconf-i18n debian-archive-keyring debianutils diffutils dpkg e2fslibs e2fsprogs findutils gcc-4.4-base gnupg gpgv grep gzip hostname initscripts insserv libacl1 libattr1 libblkid1 libbz2-1.0 libc-bin libc6 libcomerr2 libgcc1 libgdbm3 liblocale-gettext-perl libncurses5 libpam-modules libpam-runtime libpam0g libreadline6 libselinux1 libsensors4 libsepol1 libslang2 libsnmp-base libsnmp-info-perl libsnmp-perl libsnmp15 libss2 libstdc++6 libtext-charwidth-perl libtext-iconv-perl libusb-0.1-4 libuuid1 libwrap0 login lsb-base makedev mawk mount ncurses-base ncurses-bin passwd perl perl-base perl-modules readline-common sed sensible-utils sysv-rc sysvinit sysvinit-utils tar tzdata ucf util-linux xz-utils zlib1g 78 upgraded, 15 newly installed, 1 to remove and 0 not upgraded. Need to get 49.6 MB of archives. After this operation, 2896 kB disk space will be freed. Get:1 http://mirror-ubc.debian.org/debian/ wheezy/main gcc-4.7-base amd64 4.7.2-5 [144 kB] Get:2 http://mirror-ubc.debian.org/debian/ wheezy/main libgcc1 amd64 1:4.7.2-5 [43.1 kB] Get:3 http://mirror-ubc.debian.org/debian/ wheezy/main libtext-charwidth-perl amd64 0.04-7+b1 [11.2 kB] Get:4 http://mirror-ubc.debian.org/debian/ wheezy/main libsnmp-base all 5.4.3~dfsg-2.8+deb7u1 [1100 kB] Get:5 http://mirror-ubc.debian.org/debian/ wheezy/main libsnmp-perl amd64 5.4.3~dfsg-2.8+deb7u1 [129 kB] Get:6 http://mirror-ubc.debian.org/debian/ wheezy/main libsnmp15 amd64 5.4.3~dfsg-2.8+deb7u1 [2246 kB] Get:7 http://security.debian.org/ wheezy/updates/main libc-bin amd64 2.13-38+deb7u12 [1275 kB] Get:8 http://mirror-ubc.debian.org/debian/ wheezy/main libtext-iconv-perl amd64 1.7-5 [17.6 kB] Get:9 http://mirror-ubc.debian.org/debian/ wheezy/main liblocale-gettext-perl amd64 1.05-7+b1 [20.4 kB] Get:10 http://mirror-ubc.debian.org/debian/ wheezy/main libswitch-perl all 2.16-2 [21.0 kB] Get:11 http://mirror-ubc.debian.org/debian/ wheezy/main libclass-isa-perl all 0.36-3 [12.3 kB] Get:12 http://mirror-ubc.debian.org/debian/ wheezy/main libbz2-1.0 amd64 1.0.6-4 [46.5 kB] Get:13 http://mirror-ubc.debian.org/debian/ wheezy/main liblzma5 amd64 5.1.1alpha+20120614-2 [202 kB] Get:14 http://mirror-ubc.debian.org/debian/ wheezy/main dpkg amd64 1.16.18 [2665 kB] Get:15 http://mirror-ubc.debian.org/debian/ wheezy/main libgdbm3 amd64 1.8.3-11 [46.9 kB] Get:16 http://mirror-ubc.debian.org/debian/ wheezy/main zlib1g amd64 1:1.2.7.dfsg-13 [87.4 kB] Get:17 http://mirror-ubc.debian.org/debian/ wheezy/main libsensors4 amd64 1:3.3.2-2+deb7u1 [55.0 kB] Get:18 http://mirror-ubc.debian.org/debian/ wheezy/main debconf all 1.5.49 [171 kB] Get:19 http://mirror-ubc.debian.org/debian/ wheezy/main libwrap0 amd64 7.6.q-24 [62.4 kB] Get:20 http://mirror-ubc.debian.org/debian/ wheezy/main sensible-utils all 0.0.7 [8850 B] Get:21 http://mirror-ubc.debian.org/debian/ wheezy/main debianutils amd64 4.3.2 [78.9 kB] Get:22 http://mirror-ubc.debian.org/debian/ wheezy/main libsemanage-common all 2.1.6-6 [23.2 kB] Get:23 http://mirror-ubc.debian.org/debian/ wheezy/main libsepol1 amd64 2.1.4-3 [135 kB] Get:24 http://mirror-ubc.debian.org/debian/ wheezy/main libustr-1.0-1 amd64 1.0.4-3 [92.5 kB] Get:25 http://mirror-ubc.debian.org/debian/ wheezy/main libselinux1 amd64 2.1.9-5 [90.6 kB] Get:26 http://mirror-ubc.debian.org/debian/ wheezy/main libsemanage1 amd64 2.1.6-6 [102 kB] Get:27 http://mirror-ubc.debian.org/debian/ wheezy/main libpam0g amd64 1.1.3-7.1 [128 kB] Get:28 http://mirror-ubc.debian.org/debian/ wheezy/main libpam-modules-bin amd64 1.1.3-7.1 [113 kB] Get:29 http://mirror-ubc.debian.org/debian/ wheezy/main libpam-modules amd64 1.1.3-7.1 [348 kB] Get:30 http://mirror-ubc.debian.org/debian/ wheezy/main libuuid1 amd64 2.20.1-5.3 [57.1 kB] Get:31 http://mirror-ubc.debian.org/debian/ wheezy/main libblkid1 amd64 2.20.1-5.3 [120 kB] Get:32 http://mirror-ubc.debian.org/debian/ wheezy/main libslang2 amd64 2.2.4-15 [551 kB] Get:33 http://mirror-ubc.debian.org/debian/ wheezy/main libtinfo5 amd64 5.9-10 [275 kB] Get:34 http://mirror-ubc.debian.org/debian/ wheezy/main lsb-base all 4.1+Debian8+deb7u1 [26.8 kB] Get:35 http://mirror-ubc.debian.org/debian/ wheezy/main util-linux amd64 2.20.1-5.3 [659 kB] Get:36 http://mirror-ubc.debian.org/debian/ wheezy/main insserv amd64 1.14.0-5 [64.8 kB] Get:37 http://mirror-ubc.debian.org/debian/ wheezy/main sysvinit-utils amd64 2.88dsf-41+deb7u1 [100 kB] Get:38 http://mirror-ubc.debian.org/debian/ wheezy/main sysv-rc all 2.88dsf-41+deb7u1 [81.8 kB] Get:39 http://mirror-ubc.debian.org/debian/ wheezy/main libmount1 amd64 2.20.1-5.3 [120 kB] Get:40 http://mirror-ubc.debian.org/debian/ wheezy/main mount amd64 2.20.1-5.3 [213 kB] Get:41 http://mirror-ubc.debian.org/debian/ wheezy/main libattr1 amd64 1:2.4.46-8 [19.8 kB] Get:42 http://mirror-ubc.debian.org/debian/ wheezy/main libacl1 amd64 2.2.51-8 [30.1 kB] Get:43 http://mirror-ubc.debian.org/debian/ wheezy/main coreutils amd64 8.13-3.5 [5628 kB] Get:44 http://security.debian.org/ wheezy/updates/main libc6 amd64 2.13-38+deb7u12 [4226 kB] Get:45 http://mirror-ubc.debian.org/debian/ wheezy/main initscripts amd64 2.88dsf-41+deb7u1 [91.8 kB] Get:46 http://mirror-ubc.debian.org/debian/ wheezy/main base-files amd64 7.1wheezy11 [67.1 kB] Get:47 http://mirror-ubc.debian.org/debian/ wheezy/main dash amd64 0.5.7-3 [113 kB] Get:48 http://mirror-ubc.debian.org/debian/ wheezy/main diffutils amd64 1:3.2-6 [366 kB] Get:49 http://mirror-ubc.debian.org/debian/ wheezy/main libcomerr2 amd64 1.42.5-1.1+deb7u1 [56.1 kB] Get:50 http://mirror-ubc.debian.org/debian/ wheezy/main e2fslibs amd64 1.42.5-1.1+deb7u1 [197 kB] Get:51 http://mirror-ubc.debian.org/debian/ wheezy/main e2fsprogs amd64 1.42.5-1.1+deb7u1 [979 kB] Get:52 http://mirror-ubc.debian.org/debian/ wheezy/main findutils amd64 4.4.2-4 [694 kB] Get:53 http://mirror-ubc.debian.org/debian/ wheezy/main grep amd64 2.12-2 [454 kB] Get:54 http://mirror-ubc.debian.org/debian/ wheezy/main gzip amd64 1.5-1.1 [119 kB] Get:55 http://mirror-ubc.debian.org/debian/ wheezy/main hostname amd64 3.11 [15.0 kB] Get:56 http://mirror-ubc.debian.org/debian/ wheezy/main ncurses-bin amd64 5.9-10 [335 kB] Get:57 http://mirror-ubc.debian.org/debian/ wheezy/main sed amd64 4.2.1-10 [251 kB] Get:58 http://mirror-ubc.debian.org/debian/ wheezy/main sysvinit amd64 2.88dsf-41+deb7u1 [133 kB] Get:59 http://mirror-ubc.debian.org/debian/ wheezy/main base-passwd amd64 3.5.26 [46.3 kB] Get:60 http://mirror-ubc.debian.org/debian/ wheezy/main bsdutils amd64 1:2.20.1-5.3 [85.5 kB] Get:61 http://mirror-ubc.debian.org/debian/ wheezy/main ncurses-base all 5.9-10 [198 kB] Get:62 http://mirror-ubc.debian.org/debian/ wheezy/main libstdc++6 amd64 4.7.2-5 [332 kB] Get:63 http://mirror-ubc.debian.org/debian/ wheezy/main debian-archive-keyring all 2014.3~deb7u1 [60.7 kB] Get:64 http://mirror-ubc.debian.org/debian/ wheezy/main readline-common all 6.2+dfsg-0.1 [31.9 kB] Get:65 http://mirror-ubc.debian.org/debian/ wheezy/main libreadline6 amd64 6.2+dfsg-0.1 [166 kB] Get:66 http://mirror-ubc.debian.org/debian/ wheezy/main libusb-0.1-4 amd64 2:0.1.12-20+nmu1 [23.1 kB] Get:67 http://mirror-ubc.debian.org/debian/ wheezy/main libapt-pkg4.12 amd64 0.9.7.9+deb7u7 [891 kB] Get:68 http://mirror-ubc.debian.org/debian/ wheezy/main apt amd64 0.9.7.9+deb7u7 [1262 kB] Get:69 http://security.debian.org/ wheezy/updates/main multiarch-support amd64 2.13-38+deb7u12 [152 kB] Get:70 http://mirror-ubc.debian.org/debian/ wheezy/main libncurses5 amd64 5.9-10 [113 kB] Get:71 http://security.debian.org/ wheezy/updates/main perl-modules all 5.14.2-21+deb7u5 [3441 kB] Get:72 http://mirror-ubc.debian.org/debian/ wheezy/main libss2 amd64 1.42.5-1.1+deb7u1 [61.4 kB] Get:73 http://mirror-ubc.debian.org/debian/ wheezy/main mawk amd64 1.3.3-17 [90.8 kB] Get:74 http://mirror-ubc.debian.org/debian/ wheezy/main libpam-runtime all 1.1.3-7.1 [228 kB] Get:75 http://mirror-ubc.debian.org/debian/ wheezy/main xz-utils amd64 5.1.1alpha+20120614-2 [237 kB] Get:76 http://mirror-ubc.debian.org/debian/ wheezy/main adduser all 3.113+nmu3 [264 kB] Get:77 http://mirror-ubc.debian.org/debian/ wheezy/main debconf-i18n all 1.5.49 [237 kB] Get:78 http://mirror-ubc.debian.org/debian/ wheezy/main ucf all 3.0025+nmu3 [70.8 kB] Get:79 http://mirror-ubc.debian.org/debian/ wheezy/main gcc-4.4-base amd64 4.4.7-2 [127 kB] Get:80 http://mirror-ubc.debian.org/debian/ wheezy/main libsnmp-info-perl all 2.06-1 [524 kB] Get:81 http://mirror-ubc.debian.org/debian/ wheezy/main makedev all 2.3.1-92 [42.3 kB] Get:82 http://security.debian.org/ wheezy/updates/main libdb5.1 amd64 5.1.29-5+deb7u1 [723 kB] Get:83 http://security.debian.org/ wheezy/updates/main perl amd64 5.14.2-21+deb7u5 [4434 kB] Get:84 http://security.debian.org/ wheezy/updates/main libperl5.14 amd64 5.14.2-21+deb7u5 [1178 B] Get:85 http://security.debian.org/ wheezy/updates/main libssl1.0.0 amd64 1.0.1t-1+deb7u3 [1281 kB] Get:86 http://security.debian.org/ wheezy/updates/main perl-base amd64 5.14.2-21+deb7u5 [1534 kB] Get:87 http://security.debian.org/ wheezy/updates/main passwd amd64 1:4.1.5.1-1+deb7u1 [1262 kB] Get:88 http://security.debian.org/ wheezy/updates/main tzdata all 2017c-0+deb7u1 [493 kB] Get:89 http://security.debian.org/ wheezy/updates/main bash amd64 4.2+dfsg-0.1+deb7u4 [1499 kB] Get:90 http://security.debian.org/ wheezy/updates/main login amd64 1:4.1.5.1-1+deb7u1 [984 kB] Get:91 http://security.debian.org/ wheezy/updates/main tar amd64 1.26+dfsg-0.1+deb7u1 [984 kB] Get:92 http://security.debian.org/ wheezy/updates/main gpgv amd64 1.4.12-7+deb7u9 [229 kB] Get:93 http://security.debian.org/ wheezy/updates/main gnupg amd64 1.4.12-7+deb7u9 [1954 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 49.6 MB in 0s (57.9 MB/s) (Reading database ... 7988 files and directories currently installed.) Preparing to replace libc-bin 2.11.3-4 (using .../libc-bin_2.13-38+deb7u12_amd64.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.13-38+deb7u12) ... Installing new version of config file /etc/bindresvport.blacklist ... (Reading database ... 8005 files and directories currently installed.) Preparing to replace libc6 2.11.3-4 (using .../libc6_2.13-38+deb7u12_amd64.deb) ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc6 (2.13-38+deb7u12) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. Selecting previously deselected package gcc-4.7-base. (Reading database ... 8010 files and directories currently installed.) Unpacking gcc-4.7-base (from .../gcc-4.7-base_4.7.2-5_amd64.deb) ... Setting up gcc-4.7-base (4.7.2-5) ... Selecting previously deselected package multiarch-support. (Reading database ... 8017 files and directories currently installed.) Unpacking multiarch-support (from .../multiarch-support_2.13-38+deb7u12_amd64.deb) ... Setting up multiarch-support (2.13-38+deb7u12) ... (Reading database ... 8021 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.5-8 (using .../libgcc1_1%3a4.7.2-5_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.7.2-5) ... (Reading database ... 8021 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-6 (using .../libtext-charwidth-perl_0.04-7+b1_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Preparing to replace perl-modules 5.10.1-17squeeze6 (using .../perl-modules_5.14.2-21+deb7u5_all.deb) ... Unpacking replacement perl-modules ... Selecting previously deselected package libdb5.1. Unpacking libdb5.1 (from .../libdb5.1_5.1.29-5+deb7u1_amd64.deb) ... Setting up libdb5.1 (5.1.29-5+deb7u1) ... (Reading database ... 8151 files and directories currently installed.) Preparing to replace perl 5.10.1-17squeeze6 (using .../perl_5.14.2-21+deb7u5_amd64.deb) ... Unpacking replacement perl ... Preparing to replace libsnmp-base 5.4.3~dfsg-2+squeeze1 (using .../libsnmp-base_5.4.3~dfsg-2.8+deb7u1_all.deb) ... Unpacking replacement libsnmp-base ... Selecting previously deselected package libperl5.14. Unpacking libperl5.14 (from .../libperl5.14_5.14.2-21+deb7u5_amd64.deb) ... Selecting previously deselected package libssl1.0.0. Unpacking libssl1.0.0 (from .../libssl1.0.0_1.0.1t-1+deb7u3_amd64.deb) ... Preparing to replace libsnmp-perl 5.4.3~dfsg-2+squeeze1 (using .../libsnmp-perl_5.4.3~dfsg-2.8+deb7u1_amd64.deb) ... Unpacking replacement libsnmp-perl ... Preparing to replace libsnmp15 5.4.3~dfsg-2+squeeze1 (using .../libsnmp15_5.4.3~dfsg-2.8+deb7u1_amd64.deb) ... Unpacking replacement libsnmp15 ... (Reading database ... 8141 files and directories currently installed.) Removing libperl5.10 ... (Reading database ... 8139 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-2 (using .../libtext-iconv-perl_1.7-5_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Preparing to replace perl-base 5.10.1-17squeeze6 (using .../perl-base_5.14.2-21+deb7u5_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.14.2-21+deb7u5) ... (Reading database ... 8551 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-6 (using .../liblocale-gettext-perl_1.05-7+b1_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Selecting previously deselected package libswitch-perl. Unpacking libswitch-perl (from .../libswitch-perl_2.16-2_all.deb) ... Selecting previously deselected package libclass-isa-perl. Unpacking libclass-isa-perl (from .../libclass-isa-perl_0.36-3_all.deb) ... Preparing to replace libbz2-1.0 1.0.5-6+squeeze1 (using .../libbz2-1.0_1.0.6-4_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.6-4) ... Selecting previously deselected package liblzma5. (Reading database ... 8566 files and directories currently installed.) Unpacking liblzma5 (from .../liblzma5_5.1.1alpha+20120614-2_amd64.deb) ... Setting up liblzma5 (5.1.1alpha+20120614-2) ... (Reading database ... 8575 files and directories currently installed.) Preparing to replace dpkg 1.15.11 (using .../dpkg_1.16.18_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.16.18) ... (Reading database ... 8596 files and directories currently installed.) Preparing to replace libgdbm3 1.8.3-9 (using .../libgdbm3_1.8.3-11_amd64.deb) ... Unpacking replacement libgdbm3:amd64 ... Preparing to replace zlib1g 1:1.2.3.4.dfsg-3 (using .../zlib1g_1%3a1.2.7.dfsg-13_amd64.deb) ... Unpacking replacement zlib1g:amd64 ... Setting up zlib1g:amd64 (1:1.2.7.dfsg-13) ... (Reading database ... 8596 files and directories currently installed.) Preparing to replace libsensors4 1:3.1.2-6+squeeze1 (using .../libsensors4_1%3a3.3.2-2+deb7u1_amd64.deb) ... Unpacking replacement libsensors4:amd64 ... Preparing to replace debconf 1.5.36.1 (using .../debconf_1.5.49_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.49) ... (Reading database ... 8599 files and directories currently installed.) Preparing to replace libwrap0 7.6.q-19 (using .../libwrap0_7.6.q-24_amd64.deb) ... Unpacking replacement libwrap0:amd64 ... Preparing to replace sensible-utils 0.0.4 (using .../sensible-utils_0.0.7_all.deb) ... Unpacking replacement sensible-utils ... Setting up sensible-utils (0.0.7) ... (Reading database ... 8615 files and directories currently installed.) Preparing to replace debianutils 3.4 (using .../debianutils_4.3.2_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (4.3.2) ... Selecting previously unselected package libsemanage-common. (Reading database ... 8641 files and directories currently installed.) Unpacking libsemanage-common (from .../libsemanage-common_2.1.6-6_all.deb) ... Setting up libsemanage-common (2.1.6-6) ... (Reading database ... 8648 files and directories currently installed.) Preparing to replace libsepol1 2.0.41-1 (using .../libsepol1_2.1.4-3_amd64.deb) ... Unpacking replacement libsepol1:amd64 ... Setting up libsepol1:amd64 (2.1.4-3) ... Selecting previously unselected package libustr-1.0-1:amd64. (Reading database ... 8648 files and directories currently installed.) Unpacking libustr-1.0-1:amd64 (from .../libustr-1.0-1_1.0.4-3_amd64.deb) ... Setting up libustr-1.0-1:amd64 (1.0.4-3) ... (Reading database ... 8659 files and directories currently installed.) Preparing to replace libselinux1 2.0.96-1 (using .../libselinux1_2.1.9-5_amd64.deb) ... Unpacking replacement libselinux1:amd64 ... Setting up libselinux1:amd64 (2.1.9-5) ... Selecting previously unselected package libsemanage1:amd64. (Reading database ... 8659 files and directories currently installed.) Unpacking libsemanage1:amd64 (from .../libsemanage1_2.1.6-6_amd64.deb) ... Setting up libsemanage1:amd64 (2.1.6-6) ... (Reading database ... 8664 files and directories currently installed.) Preparing to replace libpam0g 1.1.1-6.1+squeeze1 (using .../libpam0g_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam0g:amd64 ... Setting up libpam0g:amd64 (1.1.3-7.1) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. Selecting previously unselected package libpam-modules-bin. (Reading database ... 8664 files and directories currently installed.) Unpacking libpam-modules-bin (from .../libpam-modules-bin_1.1.3-7.1_amd64.deb) ... Replacing files in old package libpam-modules ... Setting up libpam-modules-bin (1.1.3-7.1) ... (Reading database ... 8670 files and directories currently installed.) Preparing to replace libpam-modules 1.1.1-6.1+squeeze1 (using .../libpam-modules_1.1.3-7.1_amd64.deb) ... Unpacking replacement libpam-modules:amd64 ... Setting up libpam-modules:amd64 (1.1.3-7.1) ... Installing new version of config file /etc/security/group.conf ... (Reading database ... 8669 files and directories currently installed.) Preparing to replace passwd 1:4.1.4.2+svn3283-2+squeeze1 (using .../passwd_1%3a4.1.5.1-1+deb7u1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.5.1-1+deb7u1) ... (Reading database ... 8689 files and directories currently installed.) Preparing to replace libuuid1 2.17.2-9 (using .../libuuid1_2.20.1-5.3_amd64.deb) ... Unpacking replacement libuuid1:amd64 ... Setting up libuuid1:amd64 (2.20.1-5.3) ... (Reading database ... 8690 files and directories currently installed.) Preparing to replace libblkid1 2.17.2-9 (using .../libblkid1_2.20.1-5.3_amd64.deb) ... Unpacking replacement libblkid1:amd64 ... Setting up libblkid1:amd64 (2.20.1-5.3) ... (Reading database ... 8690 files and directories currently installed.) Preparing to replace libslang2 2.2.2-4 (using .../libslang2_2.2.4-15_amd64.deb) ... Unpacking replacement libslang2:amd64 ... Setting up libslang2:amd64 (2.2.4-15) ... Selecting previously unselected package libtinfo5:amd64. (Reading database ... 8688 files and directories currently installed.) Unpacking libtinfo5:amd64 (from .../libtinfo5_5.9-10_amd64.deb) ... Setting up libtinfo5:amd64 (5.9-10) ... (Reading database ... 8697 files and directories currently installed.) Preparing to replace lsb-base 3.2-23.2squeeze1 (using .../lsb-base_4.1+Debian8+deb7u1_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.1+Debian8+deb7u1) ... (Reading database ... 8699 files and directories currently installed.) Preparing to replace tzdata 2014e-0squeeze1 (using .../tzdata_2017c-0+deb7u1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2017c-0+deb7u1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Dec 8 14:14:15 UTC 2017. Universal Time is now: Fri Dec 8 14:14:15 UTC 2017. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 8738 files and directories currently installed.) Preparing to replace util-linux 2.17.2-9 (using .../util-linux_2.20.1-5.3_amd64.deb) ... Removing obsolete conffile /etc/init.d/hwclockfirst.sh ... Unpacking replacement util-linux ... Setting up util-linux (2.20.1-5.3) ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... 8733 files and directories currently installed.) Preparing to replace insserv 1.14.0-2 (using .../insserv_1.14.0-5_amd64.deb) ... Unpacking replacement insserv ... Setting up insserv (1.14.0-5) ... Installing new version of config file /etc/insserv.conf ... (Reading database ... 8723 files and directories currently installed.) Preparing to replace sysvinit-utils 2.88dsf-13.1+squeeze1 (using .../sysvinit-utils_2.88dsf-41+deb7u1_amd64.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.88dsf-41+deb7u1) ... (Reading database ... 8725 files and directories currently installed.) Preparing to replace sysv-rc 2.88dsf-13.1+squeeze1 (using .../sysv-rc_2.88dsf-41+deb7u1_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-41+deb7u1) ... Selecting previously unselected package libmount1. (Reading database ... 8726 files and directories currently installed.) Unpacking libmount1 (from .../libmount1_2.20.1-5.3_amd64.deb) ... Setting up libmount1 (2.20.1-5.3) ... (Reading database ... 8732 files and directories currently installed.) Preparing to replace mount 2.17.2-9 (using .../mount_2.20.1-5.3_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.20.1-5.3) ... (Reading database ... 8734 files and directories currently installed.) Preparing to replace libattr1 1:2.4.44-2 (using .../libattr1_1%3a2.4.46-8_amd64.deb) ... Unpacking replacement libattr1:amd64 ... Setting up libattr1:amd64 (1:2.4.46-8) ... (Reading database ... 8735 files and directories currently installed.) Preparing to replace libacl1 2.2.49-4 (using .../libacl1_2.2.51-8_amd64.deb) ... Unpacking replacement libacl1:amd64 ... Setting up libacl1:amd64 (2.2.51-8) ... (Reading database ... 8735 files and directories currently installed.) Preparing to replace coreutils 8.5-1 (using .../coreutils_8.13-3.5_amd64.deb) ... Unpacking replacement coreutils ... Setting up coreutils (8.13-3.5) ... (Reading database ... 8656 files and directories currently installed.) Preparing to replace initscripts 2.88dsf-13.1+squeeze1 (using .../initscripts_2.88dsf-41+deb7u1_amd64.deb) ... Removing unmodified and obsolete conffile /etc/default/bootlogd ... Removing unmodified and obsolete conffile /etc/init.d/mountoverflowtmp ... Upgrading unmodified configuration file /etc/default/rcS ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-41+deb7u1) ... Installing new version of config file /etc/init.d/bootlogs ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/mountall.sh ... Installing new version of config file /etc/init.d/mountall-bootclean.sh ... Installing new version of config file /etc/init.d/mountnfs.sh ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/sendsigs ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/umountroot ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/default/tmpfs ... Installing new version of config file /etc/network/if-up.d/mountnfs ... guest environment detected: Linking /run to /var/run guest environment detected: Linking /run/lock to /var/lock guest environment detected: Linking /run/shm to /dev/shm (Reading database ... 8656 files and directories currently installed.) Preparing to replace base-files 6.0squeeze10 (using .../base-files_7.1wheezy11_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (7.1wheezy11) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Updating /etc/profile to current default. (Reading database ... 8659 files and directories currently installed.) Preparing to replace bash 4.1-3 (using .../bash_4.2+dfsg-0.1+deb7u4_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.2+dfsg-0.1+deb7u4) ... Installing new version of config file /etc/bash.bashrc ... Installing new version of config file /etc/skel/.bashrc ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... 8662 files and directories currently installed.) Preparing to replace dash 0.5.5.1-7.4 (using .../dash_0.5.7-3_amd64.deb) ... Unpacking replacement dash ... Setting up dash (0.5.7-3) ... (Reading database ... 8662 files and directories currently installed.) Preparing to replace diffutils 1:3.0-1 (using .../diffutils_1%3a3.2-6_amd64.deb) ... Unpacking replacement diffutils ... Setting up diffutils (1:3.2-6) ... (Reading database ... 8663 files and directories currently installed.) Preparing to replace libcomerr2 1.41.12-4stable1 (using .../libcomerr2_1.42.5-1.1+deb7u1_amd64.deb) ... Unpacking replacement libcomerr2:amd64 ... Setting up libcomerr2:amd64 (1.42.5-1.1+deb7u1) ... (Reading database ... 8663 files and directories currently installed.) Preparing to replace e2fslibs 1.41.12-4stable1 (using .../e2fslibs_1.42.5-1.1+deb7u1_amd64.deb) ... Unpacking replacement e2fslibs:amd64 ... Setting up e2fslibs:amd64 (1.42.5-1.1+deb7u1) ... (Reading database ... 8663 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.12-4stable1 (using .../e2fsprogs_1.42.5-1.1+deb7u1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.42.5-1.1+deb7u1) ... Installing new version of config file /etc/mke2fs.conf ... (Reading database ... 8659 files and directories currently installed.) Preparing to replace findutils 4.4.2-1+b1 (using .../findutils_4.4.2-4_amd64.deb) ... Unpacking replacement findutils ... Setting up findutils (4.4.2-4) ... (Reading database ... 8659 files and directories currently installed.) Preparing to replace grep 2.6.3-3+squeeze1 (using .../archives/grep_2.12-2_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.12-2) ... (Reading database ... 8659 files and directories currently installed.) Preparing to replace gzip 1.3.12-9+squeeze1 (using .../gzip_1.5-1.1_amd64.deb) ... Unpacking replacement gzip ... Setting up gzip (1.5-1.1) ... (Reading database ... 8659 files and directories currently installed.) Preparing to replace hostname 3.04 (using .../hostname_3.11_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.11) ... (Reading database ... 8658 files and directories currently installed.) Preparing to replace login 1:4.1.4.2+svn3283-2+squeeze1 (using .../login_1%3a4.1.5.1-1+deb7u1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.5.1-1+deb7u1) ... Installing new version of config file /etc/pam.d/login ... Installing new version of config file /etc/login.defs ... Installing new version of config file /etc/securetty ... (Reading database ... 8673 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20100313-5 (using .../ncurses-bin_5.9-10_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.9-10) ... (Reading database ... 8675 files and directories currently installed.) Preparing to replace sed 4.2.1-7 (using .../sed_4.2.1-10_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-10) ... (Reading database ... 8675 files and directories currently installed.) Preparing to replace sysvinit 2.88dsf-13.1+squeeze1 (using .../sysvinit_2.88dsf-41+deb7u1_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-41+deb7u1) ... Not restarting sysvinit (Reading database ... 8675 files and directories currently installed.) Preparing to replace tar 1.23-3 (using .../tar_1.26+dfsg-0.1+deb7u1_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.26+dfsg-0.1+deb7u1) ... (Reading database ... 8676 files and directories currently installed.) Preparing to replace base-passwd 3.5.22 (using .../base-passwd_3.5.26_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.26) ... (Reading database ... 8678 files and directories currently installed.) Preparing to replace bsdutils 1:2.17.2-9 (using .../bsdutils_1%3a2.20.1-5.3_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.20.1-5.3) ... (Reading database ... 8678 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20100313-5 (using .../ncurses-base_5.9-10_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.9-10) ... Installing new version of config file /etc/terminfo/README ... (Reading database ... 8680 files and directories currently installed.) Preparing to replace libstdc++6 4.4.5-8 (using .../libstdc++6_4.7.2-5_amd64.deb) ... Unpacking replacement libstdc++6:amd64 ... Setting up libstdc++6:amd64 (4.7.2-5) ... (Reading database ... 8680 files and directories currently installed.) Preparing to replace gpgv 1.4.10-4+squeeze4 (using .../gpgv_1.4.12-7+deb7u9_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.12-7+deb7u9) ... (Reading database ... 8680 files and directories currently installed.) Preparing to replace debian-archive-keyring 2010.08.28+squeeze1 (using .../debian-archive-keyring_2014.3~deb7u1_all.deb) ... Unpacking replacement debian-archive-keyring ... Setting up debian-archive-keyring (2014.3~deb7u1) ... (Reading database ... 8687 files and directories currently installed.) Preparing to replace readline-common 6.1-3 (using .../readline-common_6.2+dfsg-0.1_all.deb) ... Unpacking replacement readline-common ... Setting up readline-common (6.2+dfsg-0.1) ... (Reading database ... 8686 files and directories currently installed.) Preparing to replace libreadline6 6.1-3 (using .../libreadline6_6.2+dfsg-0.1_amd64.deb) ... Unpacking replacement libreadline6:amd64 ... Setting up libreadline6:amd64 (6.2+dfsg-0.1) ... (Reading database ... 8686 files and directories currently installed.) Preparing to replace libusb-0.1-4 2:0.1.12-16 (using .../libusb-0.1-4_2%3a0.1.12-20+nmu1_amd64.deb) ... Unpacking replacement libusb-0.1-4:amd64 ... Setting up libusb-0.1-4:amd64 (2:0.1.12-20+nmu1) ... (Reading database ... 8685 files and directories currently installed.) Preparing to replace gnupg 1.4.10-4+squeeze4 (using .../gnupg_1.4.12-7+deb7u9_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.12-7+deb7u9) ... Selecting previously unselected package libapt-pkg4.12:amd64. dpkg: considering deconfiguration of apt, which would be broken by installation of libapt-pkg4.12:amd64 ... dpkg: yes, will deconfigure apt (broken by libapt-pkg4.12:amd64) (Reading database ... 8674 files and directories currently installed.) Unpacking libapt-pkg4.12:amd64 (from .../libapt-pkg4.12_0.9.7.9+deb7u7_amd64.deb) ... De-configuring apt ... Setting up libapt-pkg4.12:amd64 (0.9.7.9+deb7u7) ... (Reading database ... 8722 files and directories currently installed.) Preparing to replace apt 0.8.10.3+squeeze1 (using .../apt_0.9.7.9+deb7u7_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.9.7.9+deb7u7) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/cron.daily/apt ... gpg: key B98321F9: "Squeeze Stable Release Key " not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) " not changed gpg: key 65FFB764: "Wheezy Stable Release Key " not changed gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) " not changed gpg: key 518E17E1: "Jessie Stable Release Key " not changed gpg: key 2B90D010: "Debian Archive Automatic Signing Key (8/jessie) " not changed gpg: key C857C906: "Debian Security Archive Automatic Signing Key (8/jessie) " not changed gpg: Total number processed: 7 gpg: unchanged: 7 gpg: checking the trustdb gpg: WARNING: digest algorithm MD5 is deprecated gpg: please see http://www.gnupg.org/faq/weak-digest-algos.html for more information gpg: no ultimately trusted keys found (Reading database ... 8633 files and directories currently installed.) Preparing to replace libncurses5 5.7+20100313-5 (using .../libncurses5_5.9-10_amd64.deb) ... Unpacking replacement libncurses5:amd64 ... Setting up libncurses5:amd64 (5.9-10) ... (Reading database ... 8625 files and directories currently installed.) Preparing to replace libss2 1.41.12-4stable1 (using .../libss2_1.42.5-1.1+deb7u1_amd64.deb) ... Unpacking replacement libss2:amd64 ... Setting up libss2:amd64 (1.42.5-1.1+deb7u1) ... (Reading database ... 8625 files and directories currently installed.) Preparing to replace mawk 1.3.3-15 (using .../mawk_1.3.3-17_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libpam-runtime 1.1.1-6.1+squeeze1 (using .../libpam-runtime_1.1.3-7.1_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.3-7.1) ... (Reading database ... 8626 files and directories currently installed.) Preparing to replace xz-utils 5.0.0-2 (using .../xz-utils_5.1.1alpha+20120614-2_amd64.deb) ... Unpacking replacement xz-utils ... Setting up xz-utils (5.1.1alpha+20120614-2) ... update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode (Reading database ... 8628 files and directories currently installed.) Preparing to replace adduser 3.112+nmu2 (using .../adduser_3.113+nmu3_all.deb) ... Unpacking replacement adduser ... Preparing to replace debconf-i18n 1.5.36.1 (using .../debconf-i18n_1.5.49_all.deb) ... Unpacking replacement debconf-i18n ... Preparing to replace ucf 3.0025+nmu1 (using .../ucf_3.0025+nmu3_all.deb) ... Unpacking replacement ucf ... Preparing to replace gcc-4.4-base 4.4.5-8 (using .../gcc-4.4-base_4.4.7-2_amd64.deb) ... Unpacking replacement gcc-4.4-base:amd64 ... Preparing to replace libsnmp-info-perl 2.01-1 (using .../libsnmp-info-perl_2.06-1_all.deb) ... Unpacking replacement libsnmp-info-perl ... Preparing to replace makedev 2.3.1-89 (using .../makedev_2.3.1-92_all.deb) ... Unpacking replacement makedev ... Setting up libtext-charwidth-perl (0.04-7+b1) ... Setting up libgdbm3:amd64 (1.8.3-11) ... Setting up libclass-isa-perl (0.36-3) ... Setting up libsnmp-base (5.4.3~dfsg-2.8+deb7u1) ... Setting up libperl5.14 (5.14.2-21+deb7u5) ... Setting up libssl1.0.0:amd64 (1.0.1t-1+deb7u3) ... Setting up libsensors4:amd64 (1:3.3.2-2+deb7u1) ... Installing new version of config file /etc/sensors3.conf ... Setting up libwrap0:amd64 (7.6.q-24) ... Setting up libsnmp15 (5.4.3~dfsg-2.8+deb7u1) ... Setting up libtext-iconv-perl (1.7-5) ... Setting up liblocale-gettext-perl (1.05-7+b1) ... Setting up mawk (1.3.3-17) ... Setting up adduser (3.113+nmu3) ... Installing new version of config file /etc/deluser.conf ... Setting up debconf-i18n (1.5.49) ... Setting up ucf (3.0025+nmu3) ... Setting up gcc-4.4-base:amd64 (4.4.7-2) ... Setting up makedev (2.3.1-92) ... mv: cannot move `console-' to `console': Device or resource busy makedev console c 5 1 root tty 0600: failed Setting up perl-modules (5.14.2-21+deb7u5) ... Setting up perl (5.14.2-21+deb7u5) ... Setting up libswitch-perl (2.16-2) ... Setting up libsnmp-perl (5.4.3~dfsg-2.8+deb7u1) ... Setting up libsnmp-info-perl (2.06-1) ... 0m29.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-yf', 'dist-upgrade'] 0m29.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m30.3s DUMP: 5995174f96048d4ad1bec628af475bcf - 0m30.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m30.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'show', 'libsnmp-info-perl'] 0m30.3s DUMP: Package: libsnmp-info-perl Version: 2.06-1 Installed-Size: 1433 Maintainer: Debian Perl Group Architecture: all Depends: perl, libsnmp-perl Suggests: netdisco-mibs-installer Description: Object Oriented Perl5 Interface to Network devices and MIBs through SNMP Homepage: http://snmp-info.sourceforge.net Description-md5: cb7be57c3df4953327ca133605eacc30 Tag: devel::lang:perl, devel::library, implemented-in::perl, protocol::snmp Section: perl Priority: optional Filename: pool/main/libs/libsnmp-info-perl/libsnmp-info-perl_2.06-1_all.deb Size: 524238 MD5sum: c9ae2f157bbfce9686db9b465ace2e67 SHA1: 555a4404b10b1cfeb2c95a626f2457abe0233625 SHA256: 09f764f483c19074261342d63355d4c46f514aab9cda903f6cdd6a92d1ca09af 0m30.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'show', 'libsnmp-info-perl'] 0m30.3s INFO: apt-cache knows about the following packages: libsnmp-info-perl 0m30.3s INFO: Running scripts pre_install 0m30.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_database-server'] 0m30.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_database-server'] 0m30.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_exceptions'] 0m30.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_exceptions'] 0m30.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_extras'] 0m30.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_extras'] 0m30.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture'] 0m30.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture'] 0m30.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m30.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m30.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy'] 0m30.5s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://security.debian.org/ wheezy/updates/main amd64 Packages release v=7.0,o=Debian,a=oldoldstable,n=wheezy,l=Debian-Security,c=main origin security.debian.org 500 http://mirror-ubc.debian.org/debian/ wheezy/main amd64 Packages release v=7.11,o=Debian,a=oldoldstable,n=wheezy,l=Debian,c=main origin mirror-ubc.debian.org Pinned packages: 0m30.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy'] 0m30.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy', 'libsnmp-info-perl'] 0m30.5s DUMP: libsnmp-info-perl: Installed: 2.06-1 Candidate: 2.06-1 Version table: *** 2.06-1 0 500 http://mirror-ubc.debian.org/debian/ wheezy/main amd64 Packages 100 /var/lib/dpkg/status 0m30.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy', 'libsnmp-info-perl'] 0m30.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-y', 'install', 'libsnmp-info-perl'] 0m30.8s DUMP: Reading package lists... Building dependency tree... Reading state information... libsnmp-info-perl is already the newest version. The following packages were automatically installed and are no longer required: libdb4.7 libssl0.9.8 makedev Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m30.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-y', 'install', 'libsnmp-info-perl'] 0m30.8s INFO: Running scripts post_install 0m30.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_install_exceptions'] 0m30.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_install_exceptions'] 0m30.8s INFO: Running scripts post_distupgrade 0m30.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_base_cleanup'] 0m30.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_base_cleanup'] 0m30.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_exceptions'] 0m30.8s DUMP: FIXING /usr/share/keyrings/debian-archive-removed-keys.gpg~ `/usr/share/keyrings/debian-archive-removed-keys.gpg~' -> `/usr/share/keyrings/debian-archive-removed-keys.gpg' 0m30.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_exceptions'] 0m30.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 0m30.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 0m30.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m30.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m30.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_zz_backports'] 0m30.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_distupgrade_zz_backports'] 0m30.9s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m31.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m31.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m31.4s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m31.4s INFO: Running scripts pre_install 0m31.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_database-server'] 0m31.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_database-server'] 0m31.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_exceptions'] 0m31.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_exceptions'] 0m31.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_extras'] 0m31.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_extras'] 0m31.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture'] 0m31.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture'] 0m31.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m31.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m31.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy'] 0m31.5s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://security.debian.org/ wheezy/updates/main amd64 Packages release v=7.0,o=Debian,a=oldoldstable,n=wheezy,l=Debian-Security,c=main origin security.debian.org 500 http://mirror-ubc.debian.org/debian/ wheezy/main amd64 Packages release v=7.11,o=Debian,a=oldoldstable,n=wheezy,l=Debian,c=main origin mirror-ubc.debian.org Pinned packages: 0m31.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy'] 0m31.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy', 'libsnmp-info-perl'] 0m31.5s DUMP: libsnmp-info-perl: Installed: 2.06-1 Candidate: 2.06-1 Version table: *** 2.06-1 0 500 http://mirror-ubc.debian.org/debian/ wheezy/main amd64 Packages 100 /var/lib/dpkg/status 0m31.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-cache', 'policy', 'libsnmp-info-perl'] 0m31.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-y', 'install', 'libsnmp-info-perl=2.06-1'] 0m31.7s DUMP: Reading package lists... Building dependency tree... Reading state information... libsnmp-info-perl is already the newest version. The following packages were automatically installed and are no longer required: libdb4.7 libssl0.9.8 makedev Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m31.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', '-y', 'install', 'libsnmp-info-perl=2.06-1'] 0m31.7s INFO: Running scripts post_install 0m31.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_install_exceptions'] 0m31.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_install_exceptions'] 0m31.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m32.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m32.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m32.0s DUMP: install ok installed adduser adduser 3.113+nmu3 install ok installed apt apt 0.9.7.9+deb7u7 install ok installed base-files base-files 7.1wheezy11 install ok installed base-passwd base-passwd 3.5.26 install ok installed bash bash 4.2+dfsg-0.1+deb7u4 install ok installed bsdutils bsdutils 1:2.20.1-5.3 install ok installed coreutils coreutils 8.13-3.5 install ok installed dash dash 0.5.7-3 install ok installed debconf debconf 1.5.49 install ok installed debconf-i18n debconf-i18n 1.5.49 install ok installed debian-archive-keyring debian-archive-keyring 2014.3~deb7u1 install ok installed debianutils debianutils 4.3.2 install ok installed diffutils diffutils 1:3.2-6 install ok installed dpkg dpkg 1.16.18 install ok installed e2fslibs:amd64 e2fslibs 1.42.5-1.1+deb7u1 install ok installed e2fsprogs e2fsprogs 1.42.5-1.1+deb7u1 install ok installed findutils findutils 4.4.2-4 install ok installed gcc-4.4-base:amd64 gcc-4.4-base 4.4.7-2 install ok installed gcc-4.7-base:amd64 gcc-4.7-base 4.7.2-5 install ok installed gnupg gnupg 1.4.12-7+deb7u9 install ok installed gpgv gpgv 1.4.12-7+deb7u9 install ok installed grep grep 2.12-2 install ok installed gzip gzip 1.5-1.1 install ok installed hostname hostname 3.11 install ok installed initscripts initscripts 2.88dsf-41+deb7u1 install ok installed insserv insserv 1.14.0-5 install ok installed libacl1:amd64 libacl1 2.2.51-8 install ok installed libapt-pkg4.12:amd64 libapt-pkg4.12 0.9.7.9+deb7u7 install ok installed libattr1:amd64 libattr1 1:2.4.46-8 install ok installed libblkid1:amd64 libblkid1 2.20.1-5.3 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.6-4 install ok installed libc-bin libc-bin 2.13-38+deb7u12 install ok installed libc6:amd64 libc6 2.13-38+deb7u12 install ok installed libclass-isa-perl libclass-isa-perl 0.36-3 install ok installed libcomerr2:amd64 libcomerr2 1.42.5-1.1+deb7u1 install ok installed libdb4.7 libdb4.7 4.7.25-9 install ok installed libdb4.8 libdb4.8 4.8.30-2 install ok installed libdb5.1:amd64 libdb5.1 5.1.29-5+deb7u1 install ok installed libgcc1:amd64 libgcc1 1:4.7.2-5 install ok installed libgdbm3:amd64 libgdbm3 1.8.3-11 install ok installed liblocale-gettext-perl liblocale-gettext-perl 1.05-7+b1 install ok installed liblzma2 liblzma2 5.0.0-2 install ok installed liblzma5:amd64 liblzma5 5.1.1alpha+20120614-2 install ok installed libmount1 libmount1 2.20.1-5.3 install ok installed libncurses5:amd64 libncurses5 5.9-10 install ok installed libpam-modules:amd64 libpam-modules 1.1.3-7.1 install ok installed libpam-modules-bin libpam-modules-bin 1.1.3-7.1 install ok installed libpam-runtime libpam-runtime 1.1.3-7.1 install ok installed libpam0g:amd64 libpam0g 1.1.3-7.1 install ok installed libperl5.14 libperl5.14 5.14.2-21+deb7u5 install ok installed libreadline6:amd64 libreadline6 6.2+dfsg-0.1 install ok installed libselinux1:amd64 libselinux1 2.1.9-5 install ok installed libsemanage-common libsemanage-common 2.1.6-6 install ok installed libsemanage1:amd64 libsemanage1 2.1.6-6 install ok installed libsensors4:amd64 libsensors4 1:3.3.2-2+deb7u1 install ok installed libsepol1:amd64 libsepol1 2.1.4-3 install ok installed libslang2:amd64 libslang2 2.2.4-15 install ok installed libsnmp-base libsnmp-base 5.4.3~dfsg-2.8+deb7u1 install ok installed libsnmp-info-perl libsnmp-info-perl 2.06-1 install ok installed libsnmp-perl libsnmp-perl 5.4.3~dfsg-2.8+deb7u1 install ok installed libsnmp15 libsnmp15 5.4.3~dfsg-2.8+deb7u1 install ok installed libss2:amd64 libss2 1.42.5-1.1+deb7u1 install ok installed libssl0.9.8 libssl0.9.8 0.9.8o-4squeeze14 install ok installed libssl1.0.0:amd64 libssl1.0.0 1.0.1t-1+deb7u3 install ok installed libstdc++6:amd64 libstdc++6 4.7.2-5 install ok installed libswitch-perl libswitch-perl 2.16-2 install ok installed libtext-charwidth-perl libtext-charwidth-perl 0.04-7+b1 install ok installed libtext-iconv-perl libtext-iconv-perl 1.7-5 install ok installed libtext-wrapi18n-perl libtext-wrapi18n-perl 0.06-7 install ok installed libtinfo5:amd64 libtinfo5 5.9-10 install ok installed libusb-0.1-4:amd64 libusb-0.1-4 2:0.1.12-20+nmu1 install ok installed libustr-1.0-1:amd64 libustr-1.0-1 1.0.4-3 install ok installed libuuid1:amd64 libuuid1 2.20.1-5.3 install ok installed libwrap0:amd64 libwrap0 7.6.q-24 install ok installed login login 1:4.1.5.1-1+deb7u1 install ok installed lsb-base lsb-base 4.1+Debian8+deb7u1 install ok installed makedev makedev 2.3.1-92 install ok installed mawk mawk 1.3.3-17 install ok installed mount mount 2.20.1-5.3 install ok installed multiarch-support multiarch-support 2.13-38+deb7u12 install ok installed ncurses-base ncurses-base 5.9-10 install ok installed ncurses-bin ncurses-bin 5.9-10 install ok installed passwd passwd 1:4.1.5.1-1+deb7u1 install ok installed perl perl 5.14.2-21+deb7u5 install ok installed perl-base perl-base 5.14.2-21+deb7u5 install ok installed perl-modules perl-modules 5.14.2-21+deb7u5 install ok installed readline-common readline-common 6.2+dfsg-0.1 install ok installed sed sed 4.2.1-10 install ok installed sensible-utils sensible-utils 0.0.7 install ok installed sysv-rc sysv-rc 2.88dsf-41+deb7u1 install ok installed sysvinit sysvinit 2.88dsf-41+deb7u1 install ok installed sysvinit-utils sysvinit-utils 2.88dsf-41+deb7u1 install ok installed tar tar 1.26+dfsg-0.1+deb7u1 install ok installed tzdata tzdata 2017c-0+deb7u1 install ok installed ucf ucf 3.0025+nmu3 install ok installed util-linux util-linux 2.20.1-5.3 install ok installed xz-utils xz-utils 5.1.1alpha+20120614-2 install ok installed zlib1g:amd64 zlib1g 1:1.2.7.dfsg-13 0m32.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m32.3s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', '-ac', '--ignore-obsolete'] 0m33.0s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', '-ac', '--ignore-obsolete'] 0m33.0s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m33.0s DUMP: 0.15.1 0m33.0s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m33.0s INFO: Running adequate version 0.15.1 now. 0m33.0s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'libsnmp-info-perl'] 0m33.1s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'libsnmp-info-perl'] 0m33.1s INFO: Running scripts pre_remove 0m33.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m33.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m33.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m33.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m33.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m33.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m33.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m33.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m33.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m33.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m33.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_exceptions'] 0m33.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/pre_remove_exceptions'] 0m33.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', 'remove', 'libclass-isa-perl', 'libperl5.14', 'libswitch-perl', 'libsnmp-base', 'gcc-4.4-base:amd64', 'libssl1.0.0:amd64', 'libgdbm3:amd64', 'perl', 'libsnmp-perl', 'libsnmp15', 'perl-modules', 'libdb4.7', 'libssl0.9.8', 'libwrap0:amd64', 'makedev', 'libdb4.8', 'libsensors4:amd64', 'libsnmp-info-perl'] 0m34.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: gcc-4.4-base libclass-isa-perl libdb4.7 libdb4.8 libgdbm3 libperl5.14 libsensors4 libsnmp-base libsnmp-info-perl libsnmp-perl libsnmp15 libssl0.9.8 libssl1.0.0 libswitch-perl libwrap0 makedev perl perl-modules 0 upgraded, 0 newly installed, 18 to remove and 0 not upgraded. After this operation, 49.0 MB disk space will be freed. (Reading database ... 8661 files and directories currently installed.) Removing gcc-4.4-base:amd64 ... Removing libsnmp-info-perl ... Removing libsnmp-perl ... Removing libdb4.7 ... Removing libdb4.8 ... Removing libsnmp15 ... Removing libperl5.14 ... Removing libsensors4:amd64 ... Removing libsnmp-base ... Removing libssl0.9.8 ... Removing libssl1.0.0:amd64 ... Removing libwrap0:amd64 ... Removing makedev ... Removing perl ... Removing perl-modules ... Removing libswitch-perl ... Removing libclass-isa-perl ... Removing libgdbm3:amd64 ... 0m34.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', 'remove', 'libclass-isa-perl', 'libperl5.14', 'libswitch-perl', 'libsnmp-base', 'gcc-4.4-base:amd64', 'libssl1.0.0:amd64', 'libgdbm3:amd64', 'perl', 'libsnmp-perl', 'libsnmp15', 'perl-modules', 'libdb4.7', 'libssl0.9.8', 'libwrap0:amd64', 'makedev', 'libdb4.8', 'libsensors4:amd64', 'libsnmp-info-perl'] 0m34.2s INFO: Running scripts post_remove 0m34.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_remove_exceptions'] 0m34.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_remove_exceptions'] 0m34.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg', '--purge', 'libclass-isa-perl', 'libperl5.14', 'libswitch-perl', 'libsnmp-base', 'gcc-4.4-base:amd64', 'libssl1.0.0:amd64', 'libgdbm3:amd64', 'perl', 'libsnmp-perl', 'libsnmp15', 'perl-modules', 'libdb4.7', 'libssl0.9.8', 'libwrap0:amd64', 'makedev', 'libdb4.8', 'libsensors4:amd64'] 0m34.5s DUMP: dpkg: warning: ignoring request to remove libclass-isa-perl which isn't installed dpkg: warning: ignoring request to remove libperl5.14 which isn't installed dpkg: warning: ignoring request to remove libswitch-perl which isn't installed (Reading database ... 6801 files and directories currently installed.) Removing libsnmp-base ... Purging configuration files for libsnmp-base ... dpkg: warning: ignoring request to remove gcc-4.4-base which isn't installed Removing libssl1.0.0:amd64 ... Purging configuration files for libssl1.0.0:amd64 ... Removing libgdbm3:amd64 ... Purging configuration files for libgdbm3:amd64 ... dpkg: warning: ignoring request to remove perl which isn't installed dpkg: warning: ignoring request to remove libsnmp-perl which isn't installed Removing libsnmp15 ... Purging configuration files for libsnmp15 ... Removing perl-modules ... Purging configuration files for perl-modules ... dpkg: warning: ignoring request to remove libdb4.7 which isn't installed Removing libssl0.9.8 ... Purging configuration files for libssl0.9.8 ... Removing libwrap0:amd64 ... Purging configuration files for libwrap0:amd64 ... dpkg: warning: ignoring request to remove makedev which isn't installed dpkg: warning: ignoring request to remove libdb4.8 which isn't installed Removing libsensors4:amd64 ... Purging configuration files for libsensors4:amd64 ... 0m34.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg', '--purge', 'libclass-isa-perl', 'libperl5.14', 'libswitch-perl', 'libsnmp-base', 'gcc-4.4-base:amd64', 'libssl1.0.0:amd64', 'libgdbm3:amd64', 'perl', 'libsnmp-perl', 'libsnmp15', 'perl-modules', 'libdb4.7', 'libssl0.9.8', 'libwrap0:amd64', 'makedev', 'libdb4.8', 'libsensors4:amd64'] 0m34.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg', '--purge', 'libsnmp-info-perl'] 0m34.5s DUMP: dpkg: warning: ignoring request to remove libsnmp-info-perl which isn't installed 0m34.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg', '--purge', 'libsnmp-info-perl'] 0m34.5s INFO: Running scripts post_purge 0m34.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_purge_exceptions'] 0m34.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_purge_exceptions'] 0m34.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg', '--purge', '--pending'] 0m34.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg', '--purge', '--pending'] 0m34.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg', '--remove', '--pending'] 0m34.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg', '--remove', '--pending'] 0m34.5s INFO: Running scripts post_test 0m34.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_test_exceptions'] 0m34.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'tmp/scripts/post_test_exceptions'] 0m34.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m34.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m34.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg-divert', '--list'] 0m34.8s DUMP: diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /bin/sync to /bin/sync.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m34.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'dpkg-divert', '--list'] 0m34.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', 'clean'] 0m34.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpZiXO6E', 'apt-get', 'clean'] 0m34.8s DEBUG: Recording chroot state 0m36.0s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/shm'] 0m36.0s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/shm'] 0m36.0s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/console'] 0m36.0s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/console'] 0m36.0s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/ptmx'] 0m36.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/ptmx'] 0m36.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/pts'] 0m36.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/dev/pts'] 0m36.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/proc'] 0m36.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpZiXO6E/proc'] 0m36.1s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m36.2s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpZiXO6E'] 0m36.2s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpZiXO6E 0m36.2s INFO: PASS: Upgrading between Debian distributions. 0m36.2s INFO: PASS: All tests. 0m36.2s INFO: piuparts run ends. ret=0 End: 2017-12-08 14:14:27 UTC