Start: 2021-01-18 06:44:54 GMT [testing] Package: libdata-downsample-largesttrianglethreebuckets-perl Version: 1.00-2.1 Installed-Size: 29 Maintainer: Alexander Zangerl Architecture: all Depends: perl:any Description: Perl module for downsampling time series for visual representation Homepage: https://metacpan.org/release/Data-DownSample-LargestTriangleThreeBuckets Description-md5: 2b719ccc1da9247a4ffd5a7fcea15b53 Section: perl Priority: optional Filename: pool/main/libd/libdata-downsample-largesttrianglethreebuckets-perl/libdata-downsample-largesttrianglethreebuckets-perl_1.00-2.1_all.deb Size: 8904 MD5sum: e5727b65606aa801507e31d15fd8a7d8 SHA256: db798e36ca35e5b9e19654266c5d937037299772f4f6c68d2ea63f838af0f4b6 [sid] Package: libdata-downsample-largesttrianglethreebuckets-perl Version: 1.00-2.1 Installed-Size: 29 Maintainer: Alexander Zangerl Architecture: all Depends: perl:any Description: Perl module for downsampling time series for visual representation Homepage: https://metacpan.org/release/Data-DownSample-LargestTriangleThreeBuckets Description-md5: 2b719ccc1da9247a4ffd5a7fcea15b53 Section: perl Priority: optional Filename: pool/main/libd/libdata-downsample-largesttrianglethreebuckets-perl/libdata-downsample-largesttrianglethreebuckets-perl_1.00-2.1_all.deb Size: 8904 MD5sum: e5727b65606aa801507e31d15fd8a7d8 SHA256: db798e36ca35e5b9e19654266c5d937037299772f4f6c68d2ea63f838af0f4b6 Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python3/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/sbin/piuparts --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz -d testing -d sid -B /srv/piuparts.debian.org/slave/refchroot/testing2sid/reference-chroot-metadata.dat --apt libdata-downsample-largesttrianglethreebuckets-perl=1.00-2.1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 1.1.2~202004292056~1.1.1-20-gd7155993 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz -d testing -d sid -B /srv/piuparts.debian.org/slave/refchroot/testing2sid/reference-chroot-metadata.dat --apt libdata-downsample-largesttrianglethreebuckets-perl=1.00-2.1 0m0.0s INFO: Running on: Linux piu-slave-ubc-01 4.19.0-13-amd64 #1 SMP Debian 4.19.160-2 (2020-11-28) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmp6adi83yc 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmp6adi83yc 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz'] 0m1.7s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', '-zxf', '/srv/piuparts.debian.org/slave/basetgz/bullseye_amd64.tar.gz'] 0m1.7s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/proc'] 0m1.7s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/proc'] 0m1.7s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/pts'] 0m1.7s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/pts'] 0m1.7s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/ptmx'] 0m1.7s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/ptmx'] 0m1.7s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/4', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/console'] 0m1.8s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/4', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/console'] 0m1.8s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/shm'] 0m1.8s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/shm'] 0m1.8s DEBUG: sources.list: deb http://deb.debian.org/debian/ bullseye main 0m1.8s DEBUG: Created policy-rc.d and chmodded it. 0m1.8s DEBUG: Created resolv.conf. 0m1.8s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmp6adi83yc/tmp/scripts/ 0m1.8s INFO: Running scripts post_chroot_unpack 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m1.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m1.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', 'update'] 0m4.9s DUMP: Get:1 http://deb.debian.org/debian bullseye InRelease [123 kB] Get:2 http://deb.debian.org/debian bullseye/main amd64 Packages [8115 kB] Get:3 http://deb.debian.org/debian bullseye/main Translation-en [6180 kB] Fetched 14.4 MB in 3s (5643 kB/s) Reading package lists... 0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', 'update'] 0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-yf', 'dist-upgrade'] 0m8.6s DUMP: Reading package lists... Building dependency tree... Calculating upgrade... The following NEW packages will be installed: libgssapi-krb5-2 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libnsl2 libssl1.1 libtirpc-common libtirpc3 The following packages will be upgraded: apt bsdutils dpkg findutils gcc-10-base gcc-9-base libapt-pkg6.0 libblkid1 libgcc-s1 libidn2-0 libmount1 libpam-modules libpam-modules-bin libpam-runtime libpam0g libsmartcols1 libstdc++6 libuuid1 libxxhash0 mount util-linux 21 upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB of archives. After this operation, 6790 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian bullseye/main amd64 bsdutils amd64 1:2.36.1-5 [148 kB] Get:2 http://deb.debian.org/debian bullseye/main amd64 dpkg amd64 1.20.7.1 [2464 kB] Get:3 http://deb.debian.org/debian bullseye/main amd64 findutils amd64 4.8.0-1 [697 kB] Get:4 http://deb.debian.org/debian bullseye/main amd64 util-linux amd64 2.36.1-5 [1140 kB] Get:5 http://deb.debian.org/debian bullseye/main amd64 gcc-10-base amd64 10.2.1-6 [201 kB] Get:6 http://deb.debian.org/debian bullseye/main amd64 libgcc-s1 amd64 10.2.1-6 [41.4 kB] Get:7 http://deb.debian.org/debian bullseye/main amd64 libstdc++6 amd64 10.2.1-6 [493 kB] Get:8 http://deb.debian.org/debian bullseye/main amd64 libxxhash0 amd64 0.8.0-2 [26.9 kB] Get:9 http://deb.debian.org/debian bullseye/main amd64 libapt-pkg6.0 amd64 2.1.18 [1049 kB] Get:10 http://deb.debian.org/debian bullseye/main amd64 apt amd64 2.1.18 [1483 kB] Get:11 http://deb.debian.org/debian bullseye/main amd64 libkrb5support0 amd64 1.18.3-4 [65.1 kB] Get:12 http://deb.debian.org/debian bullseye/main amd64 libk5crypto3 amd64 1.18.3-4 [113 kB] Get:13 http://deb.debian.org/debian bullseye/main amd64 libkeyutils1 amd64 1.6.1-2 [15.4 kB] Get:14 http://deb.debian.org/debian bullseye/main amd64 libssl1.1 amd64 1.1.1i-1 [1551 kB] Get:15 http://deb.debian.org/debian bullseye/main amd64 libkrb5-3 amd64 1.18.3-4 [362 kB] Get:16 http://deb.debian.org/debian bullseye/main amd64 libgssapi-krb5-2 amd64 1.18.3-4 [165 kB] Get:17 http://deb.debian.org/debian bullseye/main amd64 libtirpc-common all 1.3.1-1 [13.4 kB] Get:18 http://deb.debian.org/debian bullseye/main amd64 libtirpc3 amd64 1.3.1-1 [83.6 kB] Get:19 http://deb.debian.org/debian bullseye/main amd64 libnsl2 amd64 1.3.0-2 [39.5 kB] Get:20 http://deb.debian.org/debian bullseye/main amd64 libpam0g amd64 1.4.0-2 [128 kB] Get:21 http://deb.debian.org/debian bullseye/main amd64 libpam-modules-bin amd64 1.4.0-2 [102 kB] Get:22 http://deb.debian.org/debian bullseye/main amd64 libpam-modules amd64 1.4.0-2 [320 kB] Get:23 http://deb.debian.org/debian bullseye/main amd64 mount amd64 2.36.1-5 [185 kB] Get:24 http://deb.debian.org/debian bullseye/main amd64 libpam-runtime all 1.4.0-2 [204 kB] Get:25 http://deb.debian.org/debian bullseye/main amd64 libblkid1 amd64 2.36.1-5 [193 kB] Get:26 http://deb.debian.org/debian bullseye/main amd64 libidn2-0 amd64 2.3.0-5 [86.1 kB] Get:27 http://deb.debian.org/debian bullseye/main amd64 libmount1 amd64 2.36.1-5 [211 kB] Get:28 http://deb.debian.org/debian bullseye/main amd64 libsmartcols1 amd64 2.36.1-5 [157 kB] Get:29 http://deb.debian.org/debian bullseye/main amd64 libuuid1 amd64 2.36.1-5 [83.5 kB] Get:30 http://deb.debian.org/debian bullseye/main amd64 gcc-9-base amd64 9.3.0-20 [198 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 12.0 MB in 0s (66.7 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6608 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.36.1-5_amd64.deb ... Unpacking bsdutils (1:2.36.1-5) over (1:2.36.1-4) ... Setting up bsdutils (1:2.36.1-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6608 files and directories currently installed.) Preparing to unpack .../dpkg_1.20.7.1_amd64.deb ... Unpacking dpkg (1.20.7.1) over (1.20.5) ... Setting up dpkg (1.20.7.1) ... Installing new version of config file /etc/cron.daily/dpkg ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../findutils_4.8.0-1_amd64.deb ... Unpacking findutils (4.8.0-1) over (4.7.0+git20201010-2) ... Setting up findutils (4.8.0-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../util-linux_2.36.1-5_amd64.deb ... Unpacking util-linux (2.36.1-5) over (2.36.1-4) ... Setting up util-linux (2.36.1-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../gcc-10-base_10.2.1-6_amd64.deb ... Unpacking gcc-10-base:amd64 (10.2.1-6) over (10.2.1-3) ... Setting up gcc-10-base:amd64 (10.2.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../libgcc-s1_10.2.1-6_amd64.deb ... Unpacking libgcc-s1:amd64 (10.2.1-6) over (10.2.1-3) ... Setting up libgcc-s1:amd64 (10.2.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../libstdc++6_10.2.1-6_amd64.deb ... Unpacking libstdc++6:amd64 (10.2.1-6) over (10.2.1-3) ... Setting up libstdc++6:amd64 (10.2.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../libxxhash0_0.8.0-2_amd64.deb ... Unpacking libxxhash0:amd64 (0.8.0-2) over (0.8.0-1) ... Setting up libxxhash0:amd64 (0.8.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../libapt-pkg6.0_2.1.18_amd64.deb ... Unpacking libapt-pkg6.0:amd64 (2.1.18) over (2.1.17) ... Setting up libapt-pkg6.0:amd64 (2.1.18) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../archives/apt_2.1.18_amd64.deb ... Unpacking apt (2.1.18) over (2.1.17) ... Setting up apt (2.1.18) ... Selecting previously unselected package libkrb5support0:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6622 files and directories currently installed.) Preparing to unpack .../libkrb5support0_1.18.3-4_amd64.deb ... Unpacking libkrb5support0:amd64 (1.18.3-4) ... Setting up libkrb5support0:amd64 (1.18.3-4) ... Selecting previously unselected package libk5crypto3:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6627 files and directories currently installed.) Preparing to unpack .../libk5crypto3_1.18.3-4_amd64.deb ... Unpacking libk5crypto3:amd64 (1.18.3-4) ... Setting up libk5crypto3:amd64 (1.18.3-4) ... Selecting previously unselected package libkeyutils1:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6632 files and directories currently installed.) Preparing to unpack .../libkeyutils1_1.6.1-2_amd64.deb ... Unpacking libkeyutils1:amd64 (1.6.1-2) ... Setting up libkeyutils1:amd64 (1.6.1-2) ... Selecting previously unselected package libssl1.1:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6637 files and directories currently installed.) Preparing to unpack .../libssl1.1_1.1.1i-1_amd64.deb ... Unpacking libssl1.1:amd64 (1.1.1i-1) ... Setting up libssl1.1:amd64 (1.1.1i-1) ... Selecting previously unselected package libkrb5-3:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6647 files and directories currently installed.) Preparing to unpack .../libkrb5-3_1.18.3-4_amd64.deb ... Unpacking libkrb5-3:amd64 (1.18.3-4) ... Setting up libkrb5-3:amd64 (1.18.3-4) ... Selecting previously unselected package libgssapi-krb5-2:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6660 files and directories currently installed.) Preparing to unpack .../libgssapi-krb5-2_1.18.3-4_amd64.deb ... Unpacking libgssapi-krb5-2:amd64 (1.18.3-4) ... Setting up libgssapi-krb5-2:amd64 (1.18.3-4) ... Selecting previously unselected package libtirpc-common. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6668 files and directories currently installed.) Preparing to unpack .../libtirpc-common_1.3.1-1_all.deb ... Unpacking libtirpc-common (1.3.1-1) ... Setting up libtirpc-common (1.3.1-1) ... Selecting previously unselected package libtirpc3:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6674 files and directories currently installed.) Preparing to unpack .../libtirpc3_1.3.1-1_amd64.deb ... Unpacking libtirpc3:amd64 (1.3.1-1) ... Setting up libtirpc3:amd64 (1.3.1-1) ... Selecting previously unselected package libnsl2:amd64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6680 files and directories currently installed.) Preparing to unpack .../libnsl2_1.3.0-2_amd64.deb ... Unpacking libnsl2:amd64 (1.3.0-2) ... Setting up libnsl2:amd64 (1.3.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6686 files and directories currently installed.) Preparing to unpack .../libpam0g_1.4.0-2_amd64.deb ... Unpacking libpam0g:amd64 (1.4.0-2) over (1.3.1-5) ... Setting up libpam0g:amd64 (1.4.0-2) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6686 files and directories currently installed.) Preparing to unpack .../libpam-modules-bin_1.4.0-2_amd64.deb ... Unpacking libpam-modules-bin (1.4.0-2) over (1.3.1-5) ... Setting up libpam-modules-bin (1.4.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6684 files and directories currently installed.) Preparing to unpack .../libpam-modules_1.4.0-2_amd64.deb ... Unpacking libpam-modules:amd64 (1.4.0-2) over (1.3.1-5) ... Setting up libpam-modules:amd64 (1.4.0-2) ... Installing new version of config file /etc/security/namespace.conf ... Installing new version of config file /etc/security/pam_env.conf ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6689 files and directories currently installed.) Preparing to unpack .../mount_2.36.1-5_amd64.deb ... Unpacking mount (2.36.1-5) over (2.36.1-4) ... Preparing to unpack .../libpam-runtime_1.4.0-2_all.deb ... Unpacking libpam-runtime (1.4.0-2) over (1.3.1-5) ... Setting up libpam-runtime (1.4.0-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6646 files and directories currently installed.) Preparing to unpack .../libblkid1_2.36.1-5_amd64.deb ... Unpacking libblkid1:amd64 (2.36.1-5) over (2.36.1-4) ... Setting up libblkid1:amd64 (2.36.1-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6646 files and directories currently installed.) Preparing to unpack .../libidn2-0_2.3.0-5_amd64.deb ... Unpacking libidn2-0:amd64 (2.3.0-5) over (2.3.0-4) ... Setting up libidn2-0:amd64 (2.3.0-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6646 files and directories currently installed.) Preparing to unpack .../libmount1_2.36.1-5_amd64.deb ... Unpacking libmount1:amd64 (2.36.1-5) over (2.36.1-4) ... Setting up libmount1:amd64 (2.36.1-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6646 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.36.1-5_amd64.deb ... Unpacking libsmartcols1:amd64 (2.36.1-5) over (2.36.1-4) ... Setting up libsmartcols1:amd64 (2.36.1-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6646 files and directories currently installed.) Preparing to unpack .../libuuid1_2.36.1-5_amd64.deb ... Unpacking libuuid1:amd64 (2.36.1-5) over (2.36.1-4) ... Setting up libuuid1:amd64 (2.36.1-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6646 files and directories currently installed.) Preparing to unpack .../gcc-9-base_9.3.0-20_amd64.deb ... Unpacking gcc-9-base:amd64 (9.3.0-20) over (9.3.0-19) ... Setting up mount (2.36.1-5) ... Setting up gcc-9-base:amd64 (9.3.0-20) ... Processing triggers for libc-bin (2.31-9) ... 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-yf', 'dist-upgrade'] 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m9.6s DUMP: 3f1cf2dbcfa1a894ee3114621e763813 - 0m9.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m9.6s INFO: Running scripts post_setup 0m9.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_dummy_users'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_dummy_users'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_forbid_home'] 0m10.4s DUMP: Disabling /home Adding 'local diversion of /home to /home.distrib' 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_forbid_home'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_force-unsafe-io'] 0m10.4s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /bin/sync to /bin/sync.distrib' dpkg-divert: warning: diverting file '/bin/sync' from an Essential package with rename is dangerous, use --no-rename '/bin/sync' -> 'true' 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_force-unsafe-io'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_minimize'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_minimize'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_squeeze-backports'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_squeeze-backports'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_zz_backports'] 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_setup_zz_backports'] 0m10.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m10.4s DUMP: install ok installed adduser adduser 3.118 install ok installed apt apt 2.1.18 install ok installed base-files base-files 11 install ok installed base-passwd base-passwd 3.5.48 install ok installed bash bash 5.1-2 install ok installed bsdutils bsdutils 1:2.36.1-5 install ok installed coreutils coreutils 8.32-4+b1 install ok installed dash dash 0.5.11+git20200708+dd9ef66-5 install ok installed debconf debconf 1.5.74 install ok installed debian-archive-keyring debian-archive-keyring 2019.1 install ok installed debianutils debianutils 4.11.2 install ok installed diffutils diffutils 1:3.7-5 install ok installed dpkg dpkg 1.20.7.1 install ok installed e2fsprogs e2fsprogs 1.45.6-1 install ok installed findutils findutils 4.8.0-1 install ok installed gcc-10-base:amd64 gcc-10-base 10.2.1-6 install ok installed gcc-9-base:amd64 gcc-9-base 9.3.0-20 install ok installed gpgv gpgv 2.2.20-1 install ok installed grep grep 3.6-1 install ok installed gzip gzip 1.10-2 install ok installed hostname hostname 3.23 install ok installed init-system-helpers init-system-helpers 1.60 install ok installed libacl1:amd64 libacl1 2.2.53-9 install ok installed libapt-pkg6.0:amd64 libapt-pkg6.0 2.1.18 install ok installed libattr1:amd64 libattr1 1:2.4.48-6 install ok installed libaudit-common libaudit-common 1:3.0-2 install ok installed libaudit1:amd64 libaudit1 1:3.0-2 install ok installed libblkid1:amd64 libblkid1 2.36.1-5 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-4 install ok installed libc-bin libc-bin 2.31-9 install ok installed libc6:amd64 libc6 2.31-9 install ok installed libcap-ng0:amd64 libcap-ng0 0.7.9-2.2+b1 install ok installed libcom-err2:amd64 libcom-err2 1.45.6-1 install ok installed libcrypt1:amd64 libcrypt1 1:4.4.17-1 install ok installed libdb5.3:amd64 libdb5.3 5.3.28+dfsg1-0.6 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.256 install ok installed libext2fs2:amd64 libext2fs2 1.45.6-1 install ok installed libffi7:amd64 libffi7 3.3-5 install ok installed libgcc-s1:amd64 libgcc-s1 10.2.1-6 install ok installed libgcrypt20:amd64 libgcrypt20 1.8.7-2 install ok installed libgmp10:amd64 libgmp10 2:6.2.1+dfsg-1 install ok installed libgnutls30:amd64 libgnutls30 3.7.0-5 install ok installed libgpg-error0:amd64 libgpg-error0 1.38-2 install ok installed libgssapi-krb5-2:amd64 libgssapi-krb5-2 1.18.3-4 install ok installed libhogweed6:amd64 libhogweed6 3.6-2 install ok installed libidn2-0:amd64 libidn2-0 2.3.0-5 install ok installed libk5crypto3:amd64 libk5crypto3 1.18.3-4 install ok installed libkeyutils1:amd64 libkeyutils1 1.6.1-2 install ok installed libkrb5-3:amd64 libkrb5-3 1.18.3-4 install ok installed libkrb5support0:amd64 libkrb5support0 1.18.3-4 install ok installed liblz4-1:amd64 liblz4-1 1.9.3-1 install ok installed liblzma5:amd64 liblzma5 5.2.5-1.0 install ok installed libmount1:amd64 libmount1 2.36.1-5 install ok installed libnettle8:amd64 libnettle8 3.6-2 install ok installed libnsl2:amd64 libnsl2 1.3.0-2 install ok installed libp11-kit0:amd64 libp11-kit0 0.23.22-1 install ok installed libpam-modules:amd64 libpam-modules 1.4.0-2 install ok installed libpam-modules-bin libpam-modules-bin 1.4.0-2 install ok installed libpam-runtime libpam-runtime 1.4.0-2 install ok installed libpam0g:amd64 libpam0g 1.4.0-2 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.36-2 install ok installed libpcre3:amd64 libpcre3 2:8.39-13 install ok installed libseccomp2:amd64 libseccomp2 2.5.1-1 install ok installed libselinux1:amd64 libselinux1 3.1-2+b2 install ok installed libsemanage-common libsemanage-common 3.1-1 install ok installed libsemanage1:amd64 libsemanage1 3.1-1+b2 install ok installed libsepol1:amd64 libsepol1 3.1-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.36.1-5 install ok installed libss2:amd64 libss2 1.45.6-1 install ok installed libssl1.1:amd64 libssl1.1 1.1.1i-1 install ok installed libstdc++6:amd64 libstdc++6 10.2.1-6 install ok installed libsystemd0:amd64 libsystemd0 247.2-4 install ok installed libtasn1-6:amd64 libtasn1-6 4.16.0-2 install ok installed libtinfo6:amd64 libtinfo6 6.2+20201114-2 install ok installed libtirpc-common libtirpc-common 1.3.1-1 install ok installed libtirpc3:amd64 libtirpc3 1.3.1-1 install ok installed libudev1:amd64 libudev1 247.2-4 install ok installed libunistring2:amd64 libunistring2 0.9.10-4 install ok installed libuuid1:amd64 libuuid1 2.36.1-5 install ok installed libxxhash0:amd64 libxxhash0 0.8.0-2 install ok installed libzstd1:amd64 libzstd1 1.4.8+dfsg-1 install ok installed login login 1:4.8.1-1 install ok installed logsave logsave 1.45.6-1 install ok installed lsb-base lsb-base 11.1.0 install ok installed mawk mawk 1.3.4.20200120-2 install ok installed mount mount 2.36.1-5 install ok installed ncurses-base ncurses-base 6.2+20201114-2 install ok installed ncurses-bin ncurses-bin 6.2+20201114-2 install ok installed passwd passwd 1:4.8.1-1 install ok installed perl-base perl-base 5.32.0-6 install ok installed sed sed 4.7-1 install ok installed sysvinit-utils sysvinit-utils 2.96-5 install ok installed tar tar 1.32+dfsg-1 install ok installed tzdata tzdata 2020f-1 install ok installed util-linux util-linux 2.36.1-5 install ok installed zlib1g:amd64 zlib1g 1:1.2.11.dfsg-2 0m10.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m10.4s DEBUG: Loading chroot meta data from /srv/piuparts.debian.org/slave/refchroot/testing2sid/reference-chroot-metadata.dat 0m10.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m10.7s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m10.7s INFO: Running scripts is_testable 0m10.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/is_testable_uninstallable'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/is_testable_uninstallable'] 0m10.8s INFO: Running scripts pre_test 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_test_exceptions'] 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_test_exceptions'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_test_root_password'] 0m10.8s DUMP: New password: Retype new password: passwd: password updated successfully 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_test_root_password'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'show', '--no-all-versions', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m10.9s DUMP: Package: libdata-downsample-largesttrianglethreebuckets-perl Version: 1.00-2.1 Installed-Size: 29 Maintainer: Alexander Zangerl Architecture: all Depends: perl:any Description-en: Perl module for downsampling time series for visual representation This module implements a downsampling technique known as Largest Triangle Three Buckets, which aims at retaining the visual character of the plotted data even at very much reduced data set size. . The technique is described in detail in Sveinn Steinarsson's thesis which can be found at https://skemman.is/handle/1946/15343 Description-md5: 2b719ccc1da9247a4ffd5a7fcea15b53 Homepage: https://metacpan.org/release/Data-DownSample-LargestTriangleThreeBuckets Section: perl Priority: optional Filename: pool/main/libd/libdata-downsample-largesttrianglethreebuckets-perl/libdata-downsample-largesttrianglethreebuckets-perl_1.00-2.1_all.deb Size: 8904 MD5sum: e5727b65606aa801507e31d15fd8a7d8 SHA256: db798e36ca35e5b9e19654266c5d937037299772f4f6c68d2ea63f838af0f4b6 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'show', '--no-all-versions', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m10.9s INFO: apt-cache knows about the following packages: libdata-downsample-largesttrianglethreebuckets-perl 0m10.9s INFO: Running scripts pre_install 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_database-server'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_database-server'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_exceptions'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_exceptions'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_extras'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_extras'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy'] 0m11.0s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://deb.debian.org/debian bullseye/main amd64 Packages release o=Debian,a=testing,n=bullseye,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy'] 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m11.0s DUMP: libdata-downsample-largesttrianglethreebuckets-perl: Installed: (none) Candidate: 1.00-2.1 Version table: 1.00-2.1 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 0m11.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m11.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-y', 'install', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m12.7s DUMP: Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libgdbm-compat4 libgdbm6 libperl5.32 perl perl-modules-5.32 Suggested packages: gdbm-l10n sensible-utils perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl make libtap-harness-archive-perl Recommended packages: netbase The following NEW packages will be installed: libdata-downsample-largesttrianglethreebuckets-perl libgdbm-compat4 libgdbm6 libperl5.32 perl perl-modules-5.32 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 7336 kB of archives. After this operation, 47.3 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian bullseye/main amd64 perl-modules-5.32 all 5.32.0-6 [2820 kB] Get:2 http://deb.debian.org/debian bullseye/main amd64 libgdbm6 amd64 1.19-1 [64.6 kB] Get:3 http://deb.debian.org/debian bullseye/main amd64 libgdbm-compat4 amd64 1.19-1 [44.5 kB] Get:4 http://deb.debian.org/debian bullseye/main amd64 libperl5.32 amd64 5.32.0-6 [4105 kB] Get:5 http://deb.debian.org/debian bullseye/main amd64 perl amd64 5.32.0-6 [293 kB] Get:6 http://deb.debian.org/debian bullseye/main amd64 libdata-downsample-largesttrianglethreebuckets-perl all 1.00-2.1 [8904 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 7336 kB in 0s (39.6 MB/s) Selecting previously unselected package perl-modules-5.32. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6648 files and directories currently installed.) Preparing to unpack .../0-perl-modules-5.32_5.32.0-6_all.deb ... Unpacking perl-modules-5.32 (5.32.0-6) ... Selecting previously unselected package libgdbm6:amd64. Preparing to unpack .../1-libgdbm6_1.19-1_amd64.deb ... Unpacking libgdbm6:amd64 (1.19-1) ... Selecting previously unselected package libgdbm-compat4:amd64. Preparing to unpack .../2-libgdbm-compat4_1.19-1_amd64.deb ... Unpacking libgdbm-compat4:amd64 (1.19-1) ... Selecting previously unselected package libperl5.32:amd64. Preparing to unpack .../3-libperl5.32_5.32.0-6_amd64.deb ... Unpacking libperl5.32:amd64 (5.32.0-6) ... Selecting previously unselected package perl. Preparing to unpack .../4-perl_5.32.0-6_amd64.deb ... Unpacking perl (5.32.0-6) ... Selecting previously unselected package libdata-downsample-largesttrianglethreebuckets-perl. Preparing to unpack .../5-libdata-downsample-largesttrianglethreebuckets-perl_1.00-2.1_all.deb ... Unpacking libdata-downsample-largesttrianglethreebuckets-perl (1.00-2.1) ... Setting up perl-modules-5.32 (5.32.0-6) ... Setting up libgdbm6:amd64 (1.19-1) ... Setting up libgdbm-compat4:amd64 (1.19-1) ... Setting up libperl5.32:amd64 (5.32.0-6) ... Setting up perl (5.32.0-6) ... Setting up libdata-downsample-largesttrianglethreebuckets-perl (1.00-2.1) ... Processing triggers for libc-bin (2.31-9) ... 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-y', 'install', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m12.7s INFO: Running scripts post_install 0m12.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_install_exceptions'] 0m12.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_install_exceptions'] 0m12.7s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m13.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m13.0s DEBUG: Upgrading /srv/piuparts.debian.org/tmp/tmp6adi83yc to sid 0m13.0s DEBUG: sources.list: deb http://deb.debian.org/debian/ sid main 0m13.0s INFO: Running scripts pre_distupgrade 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_allow_unauthenticated'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_allow_unauthenticated'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_exceptions'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_exceptions'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_foreign_architecture_i386'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_zz_database-server'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_distupgrade_zz_upgrade_early'] 0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', 'update'] 0m16.1s DUMP: Get:1 http://deb.debian.org/debian sid InRelease [153 kB] Get:2 http://deb.debian.org/debian sid/main amd64 Packages [8591 kB] Get:3 http://deb.debian.org/debian sid/main Translation-en [6458 kB] Fetched 15.2 MB in 2s (6151 kB/s) Reading package lists... 0m16.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', 'update'] 0m16.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-yf', 'dist-upgrade'] 0m17.9s DUMP: Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages will be upgraded: bsdutils libblkid1 libmount1 libsmartcols1 libssl1.1 libuuid1 mount util-linux 8 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 3668 kB of archives. After this operation, 1024 B of additional disk space will be used. Get:1 http://deb.debian.org/debian sid/main amd64 bsdutils amd64 1:2.36.1-6 [148 kB] Get:2 http://deb.debian.org/debian sid/main amd64 util-linux amd64 2.36.1-6 [1138 kB] Get:3 http://deb.debian.org/debian sid/main amd64 mount amd64 2.36.1-6 [186 kB] Get:4 http://deb.debian.org/debian sid/main amd64 libblkid1 amd64 2.36.1-6 [193 kB] Get:5 http://deb.debian.org/debian sid/main amd64 libmount1 amd64 2.36.1-6 [211 kB] Get:6 http://deb.debian.org/debian sid/main amd64 libsmartcols1 amd64 2.36.1-6 [157 kB] Get:7 http://deb.debian.org/debian sid/main amd64 libssl1.1 amd64 1.1.1i-2 [1551 kB] Get:8 http://deb.debian.org/debian sid/main amd64 libuuid1 amd64 2.36.1-6 [83.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 3668 kB in 0s (21.2 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8627 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.36.1-6_amd64.deb ... Unpacking bsdutils (1:2.36.1-6) over (1:2.36.1-5) ... Setting up bsdutils (1:2.36.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8627 files and directories currently installed.) Preparing to unpack .../util-linux_2.36.1-6_amd64.deb ... Unpacking util-linux (2.36.1-6) over (2.36.1-5) ... Setting up util-linux (2.36.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8627 files and directories currently installed.) Preparing to unpack .../mount_2.36.1-6_amd64.deb ... Unpacking mount (2.36.1-6) over (2.36.1-5) ... Preparing to unpack .../libblkid1_2.36.1-6_amd64.deb ... Unpacking libblkid1:amd64 (2.36.1-6) over (2.36.1-5) ... Setting up libblkid1:amd64 (2.36.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8627 files and directories currently installed.) Preparing to unpack .../libmount1_2.36.1-6_amd64.deb ... Unpacking libmount1:amd64 (2.36.1-6) over (2.36.1-5) ... Setting up libmount1:amd64 (2.36.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8627 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.36.1-6_amd64.deb ... Unpacking libsmartcols1:amd64 (2.36.1-6) over (2.36.1-5) ... Setting up libsmartcols1:amd64 (2.36.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8627 files and directories currently installed.) Preparing to unpack .../libssl1.1_1.1.1i-2_amd64.deb ... Unpacking libssl1.1:amd64 (1.1.1i-2) over (1.1.1i-1) ... Setting up libssl1.1:amd64 (1.1.1i-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8627 files and directories currently installed.) Preparing to unpack .../libuuid1_2.36.1-6_amd64.deb ... Unpacking libuuid1:amd64 (2.36.1-6) over (2.36.1-5) ... Setting up libuuid1:amd64 (2.36.1-6) ... Setting up mount (2.36.1-6) ... Processing triggers for libc-bin (2.31-9) ... 0m17.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-yf', 'dist-upgrade'] 0m17.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m18.1s DUMP: 25935577320d2eae86d39c77bd4b6791 - 0m18.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m18.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'show', '--no-all-versions', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m18.3s DUMP: Package: libdata-downsample-largesttrianglethreebuckets-perl Version: 1.00-2.1 Installed-Size: 29 Maintainer: Alexander Zangerl Architecture: all Depends: perl:any Description-en: Perl module for downsampling time series for visual representation This module implements a downsampling technique known as Largest Triangle Three Buckets, which aims at retaining the visual character of the plotted data even at very much reduced data set size. . The technique is described in detail in Sveinn Steinarsson's thesis which can be found at https://skemman.is/handle/1946/15343 Description-md5: 2b719ccc1da9247a4ffd5a7fcea15b53 Homepage: https://metacpan.org/release/Data-DownSample-LargestTriangleThreeBuckets Section: perl Priority: optional Filename: pool/main/libd/libdata-downsample-largesttrianglethreebuckets-perl/libdata-downsample-largesttrianglethreebuckets-perl_1.00-2.1_all.deb Size: 8904 MD5sum: e5727b65606aa801507e31d15fd8a7d8 SHA256: db798e36ca35e5b9e19654266c5d937037299772f4f6c68d2ea63f838af0f4b6 0m18.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'show', '--no-all-versions', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m18.3s INFO: apt-cache knows about the following packages: libdata-downsample-largesttrianglethreebuckets-perl 0m18.3s INFO: Running scripts pre_install 0m18.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_database-server'] 0m18.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_database-server'] 0m18.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_exceptions'] 0m18.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_exceptions'] 0m18.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_extras'] 0m18.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_extras'] 0m18.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture'] 0m18.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture'] 0m18.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m18.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m18.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy'] 0m18.4s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://deb.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m18.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy'] 0m18.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m18.4s DUMP: libdata-downsample-largesttrianglethreebuckets-perl: Installed: 1.00-2.1 Candidate: 1.00-2.1 Version table: *** 1.00-2.1 500 500 http://deb.debian.org/debian sid/main amd64 Packages 100 /var/lib/dpkg/status 0m18.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m18.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-y', 'install', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m18.8s DUMP: Reading package lists... Building dependency tree... Reading state information... libdata-downsample-largesttrianglethreebuckets-perl is already the newest version (1.00-2.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-y', 'install', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m18.8s INFO: Running scripts post_install 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_install_exceptions'] 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_install_exceptions'] 0m18.8s INFO: Running scripts post_distupgrade 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_base_cleanup'] 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_base_cleanup'] 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_exceptions'] 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_exceptions'] 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_force-unsafe-io'] 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_squeeze-backports'] 0m18.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_zz_backports'] 0m18.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_distupgrade_zz_backports'] 0m18.8s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m19.2s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m19.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m19.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m19.6s INFO: Running scripts pre_install 0m19.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_database-server'] 0m19.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_database-server'] 0m19.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_exceptions'] 0m19.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_exceptions'] 0m19.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_extras'] 0m19.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_extras'] 0m19.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture'] 0m19.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture'] 0m19.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m19.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m19.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy'] 0m19.7s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://deb.debian.org/debian sid/main amd64 Packages release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m19.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy'] 0m19.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m19.8s DUMP: libdata-downsample-largesttrianglethreebuckets-perl: Installed: 1.00-2.1 Candidate: 1.00-2.1 Version table: *** 1.00-2.1 500 500 http://deb.debian.org/debian sid/main amd64 Packages 100 /var/lib/dpkg/status 0m19.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-cache', 'policy', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m19.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-y', 'install', 'libdata-downsample-largesttrianglethreebuckets-perl=1.00-2.1'] 0m20.2s DUMP: Reading package lists... Building dependency tree... Reading state information... libdata-downsample-largesttrianglethreebuckets-perl is already the newest version (1.00-2.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 0m20.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', '-y', 'install', 'libdata-downsample-largesttrianglethreebuckets-perl=1.00-2.1'] 0m20.2s INFO: Running scripts post_install 0m20.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_install_exceptions'] 0m20.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_install_exceptions'] 0m20.2s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m20.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m21.0s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', '-ac', '--ignore-obsolete'] 0m21.7s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', '-ac', '--ignore-obsolete'] 0m21.7s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m21.7s DUMP: 0.15.2 0m21.7s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m21.7s INFO: Running adequate version 0.15.2 now. 0m21.7s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m21.8s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m21.8s INFO: Running scripts pre_remove 0m21.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m21.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m21.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m21.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m21.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m22.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m22.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m22.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m22.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m22.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m22.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_exceptions'] 0m22.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/pre_remove_exceptions'] 0m22.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m22.6s DUMP: install ok installed adduser adduser 3.118 install ok installed apt apt 2.1.18 install ok installed base-files base-files 11 install ok installed base-passwd base-passwd 3.5.48 install ok installed bash bash 5.1-2 install ok installed bsdutils bsdutils 1:2.36.1-6 install ok installed coreutils coreutils 8.32-4+b1 install ok installed dash dash 0.5.11+git20200708+dd9ef66-5 install ok installed debconf debconf 1.5.74 install ok installed debian-archive-keyring debian-archive-keyring 2019.1 install ok installed debianutils debianutils 4.11.2 install ok installed diffutils diffutils 1:3.7-5 install ok installed dpkg dpkg 1.20.7.1 install ok installed e2fsprogs e2fsprogs 1.45.6-1 install ok installed findutils findutils 4.8.0-1 install ok installed gcc-10-base:amd64 gcc-10-base 10.2.1-6 install ok installed gcc-9-base:amd64 gcc-9-base 9.3.0-20 install ok installed gpgv gpgv 2.2.20-1 install ok installed grep grep 3.6-1 install ok installed gzip gzip 1.10-2 install ok installed hostname hostname 3.23 install ok installed init-system-helpers init-system-helpers 1.60 install ok installed libacl1:amd64 libacl1 2.2.53-9 install ok installed libapt-pkg6.0:amd64 libapt-pkg6.0 2.1.18 install ok installed libattr1:amd64 libattr1 1:2.4.48-6 install ok installed libaudit-common libaudit-common 1:3.0-2 install ok installed libaudit1:amd64 libaudit1 1:3.0-2 install ok installed libblkid1:amd64 libblkid1 2.36.1-6 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-4 install ok installed libc-bin libc-bin 2.31-9 install ok installed libc6:amd64 libc6 2.31-9 install ok installed libcap-ng0:amd64 libcap-ng0 0.7.9-2.2+b1 install ok installed libcom-err2:amd64 libcom-err2 1.45.6-1 install ok installed libcrypt1:amd64 libcrypt1 1:4.4.17-1 install ok installed libdata-downsample-largesttrianglethreebuckets-perl libdata-downsample-largesttrianglethreebuckets-perl 1.00-2.1 install ok installed libdb5.3:amd64 libdb5.3 5.3.28+dfsg1-0.6 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.256 install ok installed libext2fs2:amd64 libext2fs2 1.45.6-1 install ok installed libffi7:amd64 libffi7 3.3-5 install ok installed libgcc-s1:amd64 libgcc-s1 10.2.1-6 install ok installed libgcrypt20:amd64 libgcrypt20 1.8.7-2 install ok installed libgdbm-compat4:amd64 libgdbm-compat4 1.19-1 install ok installed libgdbm6:amd64 libgdbm6 1.19-1 install ok installed libgmp10:amd64 libgmp10 2:6.2.1+dfsg-1 install ok installed libgnutls30:amd64 libgnutls30 3.7.0-5 install ok installed libgpg-error0:amd64 libgpg-error0 1.38-2 install ok installed libgssapi-krb5-2:amd64 libgssapi-krb5-2 1.18.3-4 install ok installed libhogweed6:amd64 libhogweed6 3.6-2 install ok installed libidn2-0:amd64 libidn2-0 2.3.0-5 install ok installed libk5crypto3:amd64 libk5crypto3 1.18.3-4 install ok installed libkeyutils1:amd64 libkeyutils1 1.6.1-2 install ok installed libkrb5-3:amd64 libkrb5-3 1.18.3-4 install ok installed libkrb5support0:amd64 libkrb5support0 1.18.3-4 install ok installed liblz4-1:amd64 liblz4-1 1.9.3-1 install ok installed liblzma5:amd64 liblzma5 5.2.5-1.0 install ok installed libmount1:amd64 libmount1 2.36.1-6 install ok installed libnettle8:amd64 libnettle8 3.6-2 install ok installed libnsl2:amd64 libnsl2 1.3.0-2 install ok installed libp11-kit0:amd64 libp11-kit0 0.23.22-1 install ok installed libpam-modules:amd64 libpam-modules 1.4.0-2 install ok installed libpam-modules-bin libpam-modules-bin 1.4.0-2 install ok installed libpam-runtime libpam-runtime 1.4.0-2 install ok installed libpam0g:amd64 libpam0g 1.4.0-2 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.36-2 install ok installed libpcre3:amd64 libpcre3 2:8.39-13 install ok installed libperl5.32:amd64 libperl5.32 5.32.0-6 install ok installed libseccomp2:amd64 libseccomp2 2.5.1-1 install ok installed libselinux1:amd64 libselinux1 3.1-2+b2 install ok installed libsemanage-common libsemanage-common 3.1-1 install ok installed libsemanage1:amd64 libsemanage1 3.1-1+b2 install ok installed libsepol1:amd64 libsepol1 3.1-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.36.1-6 install ok installed libss2:amd64 libss2 1.45.6-1 install ok installed libssl1.1:amd64 libssl1.1 1.1.1i-2 install ok installed libstdc++6:amd64 libstdc++6 10.2.1-6 install ok installed libsystemd0:amd64 libsystemd0 247.2-4 install ok installed libtasn1-6:amd64 libtasn1-6 4.16.0-2 install ok installed libtinfo6:amd64 libtinfo6 6.2+20201114-2 install ok installed libtirpc-common libtirpc-common 1.3.1-1 install ok installed libtirpc3:amd64 libtirpc3 1.3.1-1 install ok installed libudev1:amd64 libudev1 247.2-4 install ok installed libunistring2:amd64 libunistring2 0.9.10-4 install ok installed libuuid1:amd64 libuuid1 2.36.1-6 install ok installed libxxhash0:amd64 libxxhash0 0.8.0-2 install ok installed libzstd1:amd64 libzstd1 1.4.8+dfsg-1 install ok installed login login 1:4.8.1-1 install ok installed logsave logsave 1.45.6-1 install ok installed lsb-base lsb-base 11.1.0 install ok installed mawk mawk 1.3.4.20200120-2 install ok installed mount mount 2.36.1-6 install ok installed ncurses-base ncurses-base 6.2+20201114-2 install ok installed ncurses-bin ncurses-bin 6.2+20201114-2 install ok installed passwd passwd 1:4.8.1-1 install ok installed perl perl 5.32.0-6 install ok installed perl-base perl-base 5.32.0-6 install ok installed perl-modules-5.32 perl-modules-5.32 5.32.0-6 install ok installed sed sed 4.7-1 install ok installed sysvinit-utils sysvinit-utils 2.96-5 install ok installed tar tar 1.32+dfsg-1 install ok installed tzdata tzdata 2020f-1 install ok installed util-linux util-linux 2.36.1-6 install ok installed zlib1g:amd64 zlib1g 1:1.2.11.dfsg-2 0m22.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m22.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', 'remove', 'libgdbm-compat4:amd64', 'libgdbm6:amd64', 'libperl5.32:amd64', 'perl', 'perl-modules-5.32', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m23.4s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libdata-downsample-largesttrianglethreebuckets-perl libgdbm-compat4 libgdbm6 libperl5.32 perl perl-modules-5.32 0 upgraded, 0 newly installed, 6 to remove and 0 not upgraded. After this operation, 47.3 MB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8627 files and directories currently installed.) Removing libdata-downsample-largesttrianglethreebuckets-perl (1.00-2.1) ... Removing perl (5.32.0-6) ... Removing libperl5.32:amd64 (5.32.0-6) ... Removing libgdbm-compat4:amd64 (1.19-1) ... Removing libgdbm6:amd64 (1.19-1) ... Removing perl-modules-5.32 (5.32.0-6) ... Processing triggers for libc-bin (2.31-9) ... 0m23.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', 'remove', 'libgdbm-compat4:amd64', 'libgdbm6:amd64', 'libperl5.32:amd64', 'perl', 'perl-modules-5.32', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m23.4s INFO: Running scripts post_remove 0m23.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_remove_exceptions'] 0m23.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_remove_exceptions'] 0m23.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg', '--purge', 'libgdbm-compat4:amd64', 'libgdbm6:amd64', 'libperl5.32:amd64', 'perl', 'perl-modules-5.32'] 0m23.5s DUMP: dpkg: warning: ignoring request to remove libgdbm-compat4 which isn't installed dpkg: warning: ignoring request to remove libgdbm6 which isn't installed dpkg: warning: ignoring request to remove libperl5.32 which isn't installed (Reading database ... 6651 files and directories currently installed.) Purging configuration files for perl (5.32.0-6) ... dpkg: warning: ignoring request to remove perl-modules-5.32 which isn't installed 0m23.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg', '--purge', 'libgdbm-compat4:amd64', 'libgdbm6:amd64', 'libperl5.32:amd64', 'perl', 'perl-modules-5.32'] 0m23.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg', '--purge', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m23.5s DUMP: dpkg: warning: ignoring request to remove libdata-downsample-largesttrianglethreebuckets-perl which isn't installed 0m23.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg', '--purge', 'libdata-downsample-largesttrianglethreebuckets-perl'] 0m23.5s INFO: Running scripts post_purge 0m23.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_purge_exceptions'] 0m23.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_purge_exceptions'] 0m23.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg', '--purge', '--pending'] 0m23.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg', '--purge', '--pending'] 0m23.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg', '--remove', '--pending'] 0m23.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg', '--remove', '--pending'] 0m23.5s INFO: Running scripts post_test 0m23.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_test_exceptions'] 0m23.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'tmp/scripts/post_test_exceptions'] 0m23.5s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m23.8s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m23.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg-divert', '--list'] 0m23.8s DUMP: local diversion of /bin/sync to /bin/sync.distrib diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash local diversion of /home to /home.distrib diversion of /bin/sh to /bin/sh.distrib by dash 0m23.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'dpkg-divert', '--list'] 0m23.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', 'clean'] 0m23.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmp6adi83yc', 'apt-get', 'clean'] 0m23.8s DEBUG: Recording chroot state 0m24.6s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/shm'] 0m24.6s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/shm'] 0m24.6s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/console'] 0m24.6s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/console'] 0m24.6s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/ptmx'] 0m24.6s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/ptmx'] 0m24.6s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/pts'] 0m24.7s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/dev/pts'] 0m24.7s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/proc'] 0m24.7s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmp6adi83yc/proc'] 0m24.7s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m24.8s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmp6adi83yc'] 0m24.8s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmp6adi83yc 0m24.8s INFO: PASS: Upgrading between Debian distributions. 0m24.8s INFO: PASS: All tests. 0m24.8s INFO: piuparts run ends. ret=0 End: 2021-01-18 06:45:19 GMT