Start: 2024-12-10 03:01:24 GMT Package: libmail-message-perl Version: 3.016-1 Installed-Size: 1287 Maintainer: Debian Perl Group Architecture: all Depends: perl:any, libio-stringy-perl, libmailtools-perl, libmime-types-perl, libtimedate-perl, liburi-perl, libuser-identity-perl (>= 1.02) Suggests: libemail-simple-perl, libhtml-tree-perl, libmime-tools-perl, libtext-autoformat-perl Description: generic class representing mail messages (perl library) Homepage: https://metacpan.org/release/Mail-Message Description-md5: be34bfbdc1e3cf069b92fc771e12bbf3 Section: perl Priority: optional Filename: pool/main/libm/libmail-message-perl/libmail-message-perl_3.016-1_all.deb Size: 428736 MD5sum: f73e2aa9adee0ed9a50790ee6c9f36ea SHA256: 9ee140540e610df3bcf3c6e2da99b36b30df8d45729ed5670f8d89e6d29a20dd Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python3/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/sbin/piuparts --install-recommends --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/trixie-merged-usr_amd64.tar.gz -d trixie --no-upgrade-test --apt libmail-message-perl=3.016-1 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong. 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 1.4.5~202409272043~1.4.4-4-gf0f1b5e8 starting up. 0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --install-recommends --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/trixie-merged-usr_amd64.tar.gz -d trixie --no-upgrade-test --apt libmail-message-perl=3.016-1 0m0.0s INFO: Running on: Linux piu-slave-conova-01 5.10.0-33-amd64 #1 SMP Debian 5.10.226-1 (2024-10-03) x86_64 0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpy0gsstz1 0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/trixie-merged-usr_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpy0gsstz1 0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/trixie-merged-usr_amd64.tar.gz'] 0m0.4s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/trixie-merged-usr_amd64.tar.gz'] 0m0.4s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/proc'] 0m0.5s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/proc'] 0m0.5s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/pts'] 0m0.5s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/pts'] 0m0.5s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/ptmx'] 0m0.5s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/ptmx'] 0m0.5s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/3', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/console'] 0m0.5s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/3', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/console'] 0m0.5s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/shm'] 0m0.5s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/shm'] 0m0.5s DEBUG: sources.list: deb http://deb.debian.org/debian/ trixie main 0m0.5s DEBUG: Created policy-rc.d and chmodded it. 0m0.5s DEBUG: Created resolv.conf. 0m0.5s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpy0gsstz1/tmp/scripts/ 0m0.5s INFO: Running scripts post_chroot_unpack 0m0.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m0.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated'] 0m0.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', 'update'] 0m3.1s DUMP: Get:1 http://deb.debian.org/debian trixie InRelease [172 kB] Get:2 http://deb.debian.org/debian trixie/main amd64 Packages [9341 kB] Get:3 http://deb.debian.org/debian trixie/main Translation-en [6270 kB] Fetched 15.8 MB in 2s (8622 kB/s) Reading package lists... 0m3.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', 'update'] 0m3.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', '-yf', 'dist-upgrade'] 0m5.2s DUMP: Reading package lists... Building dependency tree... Calculating upgrade... The following packages will be upgraded: bash bsdutils libblkid1 libdebconfclient0 libgpg-error0 libmount1 libsmartcols1 libunistring5 libuuid1 login mount util-linux 12 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 4163 kB of archives. After this operation, 271 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian trixie/main amd64 bash amd64 5.2.37-1 [1501 kB] Get:2 http://deb.debian.org/debian trixie/main amd64 bsdutils amd64 1:2.40.2-12 [106 kB] Get:3 http://deb.debian.org/debian trixie/main amd64 libuuid1 amd64 2.40.2-12 [36.0 kB] Get:4 http://deb.debian.org/debian trixie/main amd64 libblkid1 amd64 2.40.2-12 [168 kB] Get:5 http://deb.debian.org/debian trixie/main amd64 libmount1 amd64 2.40.2-12 [199 kB] Get:6 http://deb.debian.org/debian trixie/main amd64 libsmartcols1 amd64 2.40.2-12 [139 kB] Get:7 http://deb.debian.org/debian trixie/main amd64 util-linux amd64 2.40.2-12 [1209 kB] Get:8 http://deb.debian.org/debian trixie/main amd64 mount amd64 2.40.2-12 [155 kB] Get:9 http://deb.debian.org/debian trixie/main amd64 login amd64 1:4.16.0-2+really2.40.2-12 [81.8 kB] Get:10 http://deb.debian.org/debian trixie/main amd64 libdebconfclient0 amd64 0.274 [10.1 kB] Get:11 http://deb.debian.org/debian trixie/main amd64 libgpg-error0 amd64 1.51-2 [82.1 kB] Get:12 http://deb.debian.org/debian trixie/main amd64 libunistring5 amd64 1.3-1 [476 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 4163 kB in 0s (52.9 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5142 files and directories currently installed.) Preparing to unpack .../bash_5.2.37-1_amd64.deb ... Unpacking bash (5.2.37-1) over (5.2.32-1+b2) ... Setting up bash (5.2.37-1) ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5141 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.40.2-12_amd64.deb ... Unpacking bsdutils (1:2.40.2-12) over (1:2.40.2-11) ... Setting up bsdutils (1:2.40.2-12) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5141 files and directories currently installed.) Preparing to unpack .../libuuid1_2.40.2-12_amd64.deb ... Unpacking libuuid1:amd64 (2.40.2-12) over (2.40.2-11) ... Setting up libuuid1:amd64 (2.40.2-12) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5141 files and directories currently installed.) Preparing to unpack .../libblkid1_2.40.2-12_amd64.deb ... Unpacking libblkid1:amd64 (2.40.2-12) over (2.40.2-11) ... Setting up libblkid1:amd64 (2.40.2-12) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5141 files and directories currently installed.) Preparing to unpack .../libmount1_2.40.2-12_amd64.deb ... Unpacking libmount1:amd64 (2.40.2-12) over (2.40.2-11) ... Setting up libmount1:amd64 (2.40.2-12) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5141 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.40.2-12_amd64.deb ... Unpacking libsmartcols1:amd64 (2.40.2-12) over (2.40.2-11) ... Setting up libsmartcols1:amd64 (2.40.2-12) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5141 files and directories currently installed.) Preparing to unpack .../util-linux_2.40.2-12_amd64.deb ... Unpacking util-linux (2.40.2-12) over (2.40.2-11) ... Setting up util-linux (2.40.2-12) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5138 files and directories currently installed.) Preparing to unpack .../mount_2.40.2-12_amd64.deb ... Unpacking mount (2.40.2-12) over (2.40.2-11) ... Preparing to unpack .../login_1%3a4.16.0-2+really2.40.2-12_amd64.deb ... Unpacking login (1:4.16.0-2+really2.40.2-12) over (1:4.16.0-2+really2.40.2-11) ... Preparing to unpack .../libdebconfclient0_0.274_amd64.deb ... Unpacking libdebconfclient0:amd64 (0.274) over (0.273) ... Setting up libdebconfclient0:amd64 (0.274) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5138 files and directories currently installed.) Preparing to unpack .../libgpg-error0_1.51-2_amd64.deb ... Unpacking libgpg-error0:amd64 (1.51-2) over (1.50-4) ... Setting up libgpg-error0:amd64 (1.51-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5138 files and directories currently installed.) Preparing to unpack .../libunistring5_1.3-1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-1) over (1.2-1+b1) ... Setting up libunistring5:amd64 (1.3-1) ... Setting up mount (2.40.2-12) ... Setting up login (1:4.16.0-2+really2.40.2-12) ... Processing triggers for debianutils (5.21) ... Processing triggers for libc-bin (2.40-4) ... 0m5.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', '-yf', 'dist-upgrade'] 0m5.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m5.6s DUMP: 695469f0cbe47b5af90dbdd55c0307ec - 0m5.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'sh', '-c', 'apt-cache dumpavail | md5sum'] 0m5.6s INFO: Running scripts post_setup 0m5.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_dummy_users'] 0m6.7s DUMP: useradd warning: dummy1000's uid 1000 is greater than SYS_UID_MAX 999 useradd warning: dummy1001's uid 1001 is greater than SYS_UID_MAX 999 useradd warning: dummy1002's uid 1002 is greater than SYS_UID_MAX 999 useradd warning: dummy1003's uid 1003 is greater than SYS_UID_MAX 999 useradd warning: dummy1004's uid 1004 is greater than SYS_UID_MAX 999 useradd warning: dummy1005's uid 1005 is greater than SYS_UID_MAX 999 useradd warning: dummy1006's uid 1006 is greater than SYS_UID_MAX 999 useradd warning: dummy1007's uid 1007 is greater than SYS_UID_MAX 999 useradd warning: dummy1008's uid 1008 is greater than SYS_UID_MAX 999 useradd warning: dummy1009's uid 1009 is greater than SYS_UID_MAX 999 useradd warning: dummy1010's uid 1010 is greater than SYS_UID_MAX 999 0m6.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_dummy_users'] 0m6.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_forbid_home'] 0m6.7s DUMP: Disabling /home Adding 'local diversion of /home to /home.distrib' 0m6.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_forbid_home'] 0m6.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_force-unsafe-io'] 0m6.8s DUMP: Enabling dpkg --force-unsafe-io. Adding 'local diversion of /usr/bin/sync to /usr/bin/sync.distrib' Adding 'local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged' '/bin/sync' -> 'true' 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_force-unsafe-io'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_minimize'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_minimize'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_squeeze-backports'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_squeeze-backports'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_zz_backports'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_setup_zz_backports'] 0m6.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', 'clean'] 0m6.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', 'clean'] 0m6.8s DEBUG: Recording chroot state 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m7.4s DUMP: install ok installed apt apt 2.9.16 install ok installed base-files base-files 13.6 install ok installed base-passwd base-passwd 3.6.5 install ok installed bash bash 5.2.37-1 install ok installed bsdutils bsdutils 1:2.40.2-12 install ok installed coreutils coreutils 9.5-1+b1 install ok installed dash dash 0.5.12-9 install ok installed debconf debconf 1.5.87 install ok installed debian-archive-keyring debian-archive-keyring 2023.4 install ok installed debianutils debianutils 5.21 install ok installed diffutils diffutils 1:3.10-1 install ok installed dpkg dpkg 1.22.11 install ok installed e2fsprogs e2fsprogs 1.47.2~rc1-2 install ok installed findutils findutils 4.10.0-3 install ok installed gcc-14-base:amd64 gcc-14-base 14.2.0-8 install ok installed gpgv gpgv 2.2.45-2 install ok installed grep grep 3.11-4 install ok installed gzip gzip 1.12-1.1 install ok installed hostname hostname 3.25 install ok installed init-system-helpers init-system-helpers 1.67 install ok installed libacl1:amd64 libacl1 2.3.2-2+b1 install ok installed libapt-pkg6.0t64:amd64 libapt-pkg6.0t64 2.9.16 install ok installed libattr1:amd64 libattr1 1:2.5.2-2 install ok installed libaudit-common libaudit-common 1:4.0.2-2 install ok installed libaudit1:amd64 libaudit1 1:4.0.2-2 install ok installed libblkid1:amd64 libblkid1 2.40.2-12 install ok installed libbsd0:amd64 libbsd0 0.12.2-2 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-6 install ok installed libc-bin libc-bin 2.40-4 install ok installed libc6:amd64 libc6 2.40-4 install ok installed libcap-ng0:amd64 libcap-ng0 0.8.5-4 install ok installed libcap2:amd64 libcap2 1:2.66-5+b1 install ok installed libcom-err2:amd64 libcom-err2 1.47.2~rc1-2 install ok installed libcrypt1:amd64 libcrypt1 1:4.4.36-5 install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-9 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.274 install ok installed libext2fs2t64:amd64 libext2fs2t64 1.47.2~rc1-2 install ok installed libffi8:amd64 libffi8 3.4.6-1 install ok installed libgcc-s1:amd64 libgcc-s1 14.2.0-8 install ok installed libgcrypt20:amd64 libgcrypt20 1.11.0-6 install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-3 install ok installed libgnutls30t64:amd64 libgnutls30t64 3.8.8-2 install ok installed libgpg-error0:amd64 libgpg-error0 1.51-2 install ok installed libhogweed6t64:amd64 libhogweed6t64 3.10-1+b1 install ok installed libidn2-0:amd64 libidn2-0 2.3.7-2+b1 install ok installed liblz4-1:amd64 liblz4-1 1.9.4-3+b1 install ok installed liblzma5:amd64 liblzma5 5.6.3-1+b1 install ok installed libmd0:amd64 libmd0 1.1.0-2+b1 install ok installed libmount1:amd64 libmount1 2.40.2-12 install ok installed libnettle8t64:amd64 libnettle8t64 3.10-1+b1 install ok installed libp11-kit0:amd64 libp11-kit0 0.25.5-2+b1 install ok installed libpam-modules:amd64 libpam-modules 1.5.3-7+b1 install ok installed libpam-modules-bin libpam-modules-bin 1.5.3-7+b1 install ok installed libpam-runtime libpam-runtime 1.5.3-7 install ok installed libpam0g:amd64 libpam0g 1.5.3-7+b1 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.44-4 install ok installed libseccomp2:amd64 libseccomp2 2.5.5-2 install ok installed libselinux1:amd64 libselinux1 3.7-3+b1 install ok installed libsemanage-common libsemanage-common 3.7-2 install ok installed libsemanage2:amd64 libsemanage2 3.7-2+b1 install ok installed libsepol2:amd64 libsepol2 3.7-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.40.2-12 install ok installed libss2:amd64 libss2 1.47.2~rc1-2 install ok installed libssl3t64:amd64 libssl3t64 3.3.2-2 install ok installed libstdc++6:amd64 libstdc++6 14.2.0-8 install ok installed libsystemd0:amd64 libsystemd0 257~rc3-1 install ok installed libtasn1-6:amd64 libtasn1-6 4.19.0-3+b3 install ok installed libtinfo6:amd64 libtinfo6 6.5-2+b1 install ok installed libudev1:amd64 libudev1 257~rc3-1 install ok installed libunistring5:amd64 libunistring5 1.3-1 install ok installed libuuid1:amd64 libuuid1 2.40.2-12 install ok installed libxxhash0:amd64 libxxhash0 0.8.2-2+b2 install ok installed libzstd1:amd64 libzstd1 1.5.6+dfsg-1+b1 install ok installed login login 1:4.16.0-2+really2.40.2-12 install ok installed login.defs login.defs 1:4.16.0-5 install ok installed logsave logsave 1.47.2~rc1-2 install ok installed mawk mawk 1.3.4.20240905-1 install ok installed mount mount 2.40.2-12 install ok installed ncurses-base ncurses-base 6.5-2 install ok installed ncurses-bin ncurses-bin 6.5-2+b1 install ok installed openssl-provider-legacy openssl-provider-legacy 3.3.2-2 install ok installed passwd passwd 1:4.16.0-5 install ok installed perl-base perl-base 5.40.0-8 install ok installed sed sed 4.9-2 install ok installed sysvinit-utils sysvinit-utils 3.11-1 install ok installed tar tar 1.35+dfsg-3 install ok installed tzdata tzdata 2024b-4 install ok installed usr-is-merged usr-is-merged 39 install ok installed util-linux util-linux 2.40.2-12 install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg+really1.3.1-1+b1 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg-divert', '--list'] 0m7.4s DUMP: diversion of /lib/x86_64-linux-gnu/libe2p.so.2 to /lib/x86_64-linux-gnu/libe2p.so.2.usr-is-merged by libext2fs2t64 local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged diversion of /lib/x86_64-linux-gnu/libext2fs.so.2.4 to /lib/x86_64-linux-gnu/libext2fs.so.2.4.usr-is-merged by libext2fs2t64 local diversion of /home to /home.distrib diversion of /lib64/ld-linux-x86-64.so.2 to /lib64/ld-linux-x86-64.so.2.usr-is-merged by libc6 diversion of /lib/x86_64-linux-gnu/libext2fs.so.2 to /lib/x86_64-linux-gnu/libext2fs.so.2.usr-is-merged by libext2fs2t64 diversion of /lib/x86_64-linux-gnu/libe2p.so.2.3 to /lib/x86_64-linux-gnu/libe2p.so.2.3.usr-is-merged by libext2fs2t64 diversion of /libx32 to /.libx32.usr-is-merged by base-files local diversion of /usr/bin/sync to /usr/bin/sync.distrib diversion of /lib32 to /.lib32.usr-is-merged by base-files diversion of /libo32 to /.libo32.usr-is-merged by base-files 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg-divert', '--list'] 0m7.4s INFO: Running scripts is_testable 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/is_testable_uninstallable'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/is_testable_uninstallable'] 0m7.4s INFO: apt-cache does not know about any of the requested packages 0m7.4s INFO: Running scripts pre_test 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_test_exceptions'] 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_test_exceptions'] 0m7.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_test_root_password'] 0m7.4s DUMP: New password: Retype new password: passwd: password updated successfully 0m7.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_test_root_password'] 0m7.4s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m7.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m8.6s DEBUG: No broken symlinks as far as we can find. 0m8.6s INFO: Running scripts pre_install 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_database-server'] 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_database-server'] 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_exceptions'] 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_exceptions'] 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_extras'] 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_extras'] 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_foreign_architecture'] 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_foreign_architecture'] 0m8.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m8.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_install_foreign_architecture_i386'] 0m8.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m9.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m9.7s DEBUG: No broken symlinks as far as we can find. 0m9.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-cache', 'policy'] 0m10.8s DUMP: Package files: 100 /var/lib/dpkg/status release a=now 500 http://deb.debian.org/debian trixie/main amd64 Packages release o=Debian,a=testing,n=trixie,l=Debian,c=main,b=amd64 origin deb.debian.org Pinned packages: 0m10.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-cache', 'policy'] 0m10.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-cache', 'policy', 'libmail-message-perl'] 0m10.9s DUMP: libmail-message-perl: Installed: (none) Candidate: 3.016-1 Version table: 3.016-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages 0m10.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-cache', 'policy', 'libmail-message-perl'] 0m10.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', '-y', 'install', 'libmail-message-perl=3.016-1'] 0m13.3s DUMP: Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libauthen-sasl-perl libgdbm-compat4t64 libgdbm6t64 libhash-ordered-perl libio-socket-ssl-perl libio-stringy-perl libmailtools-perl libmime-types-perl libnet-smtp-ssl-perl libnet-ssleay-perl libperl5.40 libtimedate-perl liburi-perl libuser-identity-perl netbase perl perl-modules-5.40 perl-openssl-defaults Suggested packages: libdigest-hmac-perl libgssapi-perl gdbm-l10n ca-certificates libemail-simple-perl libhtml-tree-perl libmime-tools-perl libtext-autoformat-perl libmojolicious-perl sensible-utils libbusiness-isbn-perl libmime-base32-perl libregexp-ipv6-perl libwww-perl perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl make libtap-harness-archive-perl debhelper The following NEW packages will be installed: libauthen-sasl-perl libgdbm-compat4t64 libgdbm6t64 libhash-ordered-perl libio-socket-ssl-perl libio-stringy-perl libmail-message-perl libmailtools-perl libmime-types-perl libnet-smtp-ssl-perl libnet-ssleay-perl libperl5.40 libtimedate-perl liburi-perl libuser-identity-perl netbase perl perl-modules-5.40 perl-openssl-defaults 0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded. Need to get 9239 kB of archives. After this operation, 56.5 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian trixie/main amd64 netbase all 6.4 [12.8 kB] Get:2 http://deb.debian.org/debian trixie/main amd64 perl-modules-5.40 all 5.40.0-8 [3015 kB] Get:3 http://deb.debian.org/debian trixie/main amd64 libgdbm6t64 amd64 1.24-2 [75.2 kB] Get:4 http://deb.debian.org/debian trixie/main amd64 libgdbm-compat4t64 amd64 1.24-2 [50.3 kB] Get:5 http://deb.debian.org/debian trixie/main amd64 libperl5.40 amd64 5.40.0-8 [4320 kB] Get:6 http://deb.debian.org/debian trixie/main amd64 perl amd64 5.40.0-8 [267 kB] Get:7 http://deb.debian.org/debian trixie/main amd64 libauthen-sasl-perl all 2.1700-1 [44.8 kB] Get:8 http://deb.debian.org/debian trixie/main amd64 libhash-ordered-perl all 0.014-2 [29.5 kB] Get:9 http://deb.debian.org/debian trixie/main amd64 perl-openssl-defaults amd64 7+b2 [6724 B] Get:10 http://deb.debian.org/debian trixie/main amd64 libnet-ssleay-perl amd64 1.94-2 [339 kB] Get:11 http://deb.debian.org/debian trixie/main amd64 libio-socket-ssl-perl all 2.089-1 [223 kB] Get:12 http://deb.debian.org/debian trixie/main amd64 libio-stringy-perl all 2.113-2 [48.3 kB] Get:13 http://deb.debian.org/debian trixie/main amd64 libnet-smtp-ssl-perl all 1.04-2 [6548 B] Get:14 http://deb.debian.org/debian trixie/main amd64 libtimedate-perl all 2.3300-2 [39.3 kB] Get:15 http://deb.debian.org/debian trixie/main amd64 libmailtools-perl all 2.22-1 [88.8 kB] Get:16 http://deb.debian.org/debian trixie/main amd64 libmime-types-perl all 2.26-1 [67.6 kB] Get:17 http://deb.debian.org/debian trixie/main amd64 liburi-perl all 5.30-1 [105 kB] Get:18 http://deb.debian.org/debian trixie/main amd64 libuser-identity-perl all 1.02-1 [70.6 kB] Get:19 http://deb.debian.org/debian trixie/main amd64 libmail-message-perl all 3.016-1 [429 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 9239 kB in 0s (60.0 MB/s) Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 5141 files and directories currently installed.) Preparing to unpack .../00-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package perl-modules-5.40. Preparing to unpack .../01-perl-modules-5.40_5.40.0-8_all.deb ... Unpacking perl-modules-5.40 (5.40.0-8) ... Selecting previously unselected package libgdbm6t64:amd64. Preparing to unpack .../02-libgdbm6t64_1.24-2_amd64.deb ... Unpacking libgdbm6t64:amd64 (1.24-2) ... Selecting previously unselected package libgdbm-compat4t64:amd64. Preparing to unpack .../03-libgdbm-compat4t64_1.24-2_amd64.deb ... Unpacking libgdbm-compat4t64:amd64 (1.24-2) ... Selecting previously unselected package libperl5.40:amd64. Preparing to unpack .../04-libperl5.40_5.40.0-8_amd64.deb ... Unpacking libperl5.40:amd64 (5.40.0-8) ... Selecting previously unselected package perl. Preparing to unpack .../05-perl_5.40.0-8_amd64.deb ... Unpacking perl (5.40.0-8) ... Selecting previously unselected package libauthen-sasl-perl. Preparing to unpack .../06-libauthen-sasl-perl_2.1700-1_all.deb ... Unpacking libauthen-sasl-perl (2.1700-1) ... Selecting previously unselected package libhash-ordered-perl. Preparing to unpack .../07-libhash-ordered-perl_0.014-2_all.deb ... Unpacking libhash-ordered-perl (0.014-2) ... Selecting previously unselected package perl-openssl-defaults:amd64. Preparing to unpack .../08-perl-openssl-defaults_7+b2_amd64.deb ... Unpacking perl-openssl-defaults:amd64 (7+b2) ... Selecting previously unselected package libnet-ssleay-perl:amd64. Preparing to unpack .../09-libnet-ssleay-perl_1.94-2_amd64.deb ... Unpacking libnet-ssleay-perl:amd64 (1.94-2) ... Selecting previously unselected package libio-socket-ssl-perl. Preparing to unpack .../10-libio-socket-ssl-perl_2.089-1_all.deb ... Unpacking libio-socket-ssl-perl (2.089-1) ... Selecting previously unselected package libio-stringy-perl. Preparing to unpack .../11-libio-stringy-perl_2.113-2_all.deb ... Unpacking libio-stringy-perl (2.113-2) ... Selecting previously unselected package libnet-smtp-ssl-perl. Preparing to unpack .../12-libnet-smtp-ssl-perl_1.04-2_all.deb ... Unpacking libnet-smtp-ssl-perl (1.04-2) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../13-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libmailtools-perl. Preparing to unpack .../14-libmailtools-perl_2.22-1_all.deb ... Unpacking libmailtools-perl (2.22-1) ... Selecting previously unselected package libmime-types-perl. Preparing to unpack .../15-libmime-types-perl_2.26-1_all.deb ... Unpacking libmime-types-perl (2.26-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../16-liburi-perl_5.30-1_all.deb ... Unpacking liburi-perl (5.30-1) ... Selecting previously unselected package libuser-identity-perl. Preparing to unpack .../17-libuser-identity-perl_1.02-1_all.deb ... Unpacking libuser-identity-perl (1.02-1) ... Selecting previously unselected package libmail-message-perl. Preparing to unpack .../18-libmail-message-perl_3.016-1_all.deb ... Unpacking libmail-message-perl (3.016-1) ... Setting up libgdbm6t64:amd64 (1.24-2) ... Setting up libgdbm-compat4t64:amd64 (1.24-2) ... Setting up perl-openssl-defaults:amd64 (7+b2) ... Setting up perl-modules-5.40 (5.40.0-8) ... Setting up netbase (6.4) ... Setting up libperl5.40:amd64 (5.40.0-8) ... Setting up perl (5.40.0-8) ... Setting up libtimedate-perl (2.3300-2) ... Setting up liburi-perl (5.30-1) ... Setting up libnet-ssleay-perl:amd64 (1.94-2) ... Setting up libmime-types-perl (2.26-1) ... Setting up libio-stringy-perl (2.113-2) ... Setting up libauthen-sasl-perl (2.1700-1) ... Setting up libhash-ordered-perl (0.014-2) ... Setting up libuser-identity-perl (1.02-1) ... Setting up libio-socket-ssl-perl (2.089-1) ... Setting up libnet-smtp-ssl-perl (1.04-2) ... Setting up libmailtools-perl (2.22-1) ... Setting up libmail-message-perl (3.016-1) ... Processing triggers for libc-bin (2.40-4) ... 0m13.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', '-y', 'install', 'libmail-message-perl=3.016-1'] 0m13.3s INFO: Running scripts post_install 0m13.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_install_exceptions'] 0m13.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_install_exceptions'] 0m13.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m13.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m15.1s DEBUG: No broken symlinks as far as we can find. 0m15.8s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', '-ac', '--ignore-obsolete'] 0m17.1s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', '-ac', '--ignore-obsolete'] 0m17.1s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m17.2s DUMP: 0.15.6 0m17.2s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate'] 0m17.2s INFO: Running adequate version 0.15.6 now. 0m17.2s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'libmail-message-perl'] 0m17.3s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'libmail-message-perl'] 0m17.3s INFO: Running scripts pre_remove 0m17.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m17.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_40_find_missing_md5sums'] 0m17.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m17.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles'] 0m17.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m18.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_40_find_unowned_lib_links'] 0m18.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m18.2s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_50_find_bad_permissions'] 0m18.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m18.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_50_find_missing_copyright'] 0m18.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_exceptions'] 0m18.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/pre_remove_exceptions'] 0m18.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m18.4s DUMP: install ok installed apt apt 2.9.16 install ok installed base-files base-files 13.6 install ok installed base-passwd base-passwd 3.6.5 install ok installed bash bash 5.2.37-1 install ok installed bsdutils bsdutils 1:2.40.2-12 install ok installed coreutils coreutils 9.5-1+b1 install ok installed dash dash 0.5.12-9 install ok installed debconf debconf 1.5.87 install ok installed debian-archive-keyring debian-archive-keyring 2023.4 install ok installed debianutils debianutils 5.21 install ok installed diffutils diffutils 1:3.10-1 install ok installed dpkg dpkg 1.22.11 install ok installed e2fsprogs e2fsprogs 1.47.2~rc1-2 install ok installed findutils findutils 4.10.0-3 install ok installed gcc-14-base:amd64 gcc-14-base 14.2.0-8 install ok installed gpgv gpgv 2.2.45-2 install ok installed grep grep 3.11-4 install ok installed gzip gzip 1.12-1.1 install ok installed hostname hostname 3.25 install ok installed init-system-helpers init-system-helpers 1.67 install ok installed libacl1:amd64 libacl1 2.3.2-2+b1 install ok installed libapt-pkg6.0t64:amd64 libapt-pkg6.0t64 2.9.16 install ok installed libattr1:amd64 libattr1 1:2.5.2-2 install ok installed libaudit-common libaudit-common 1:4.0.2-2 install ok installed libaudit1:amd64 libaudit1 1:4.0.2-2 install ok installed libauthen-sasl-perl libauthen-sasl-perl 2.1700-1 install ok installed libblkid1:amd64 libblkid1 2.40.2-12 install ok installed libbsd0:amd64 libbsd0 0.12.2-2 install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-6 install ok installed libc-bin libc-bin 2.40-4 install ok installed libc6:amd64 libc6 2.40-4 install ok installed libcap-ng0:amd64 libcap-ng0 0.8.5-4 install ok installed libcap2:amd64 libcap2 1:2.66-5+b1 install ok installed libcom-err2:amd64 libcom-err2 1.47.2~rc1-2 install ok installed libcrypt1:amd64 libcrypt1 1:4.4.36-5 install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-9 install ok installed libdebconfclient0:amd64 libdebconfclient0 0.274 install ok installed libext2fs2t64:amd64 libext2fs2t64 1.47.2~rc1-2 install ok installed libffi8:amd64 libffi8 3.4.6-1 install ok installed libgcc-s1:amd64 libgcc-s1 14.2.0-8 install ok installed libgcrypt20:amd64 libgcrypt20 1.11.0-6 install ok installed libgdbm-compat4t64:amd64 libgdbm-compat4t64 1.24-2 install ok installed libgdbm6t64:amd64 libgdbm6t64 1.24-2 install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-3 install ok installed libgnutls30t64:amd64 libgnutls30t64 3.8.8-2 install ok installed libgpg-error0:amd64 libgpg-error0 1.51-2 install ok installed libhash-ordered-perl libhash-ordered-perl 0.014-2 install ok installed libhogweed6t64:amd64 libhogweed6t64 3.10-1+b1 install ok installed libidn2-0:amd64 libidn2-0 2.3.7-2+b1 install ok installed libio-socket-ssl-perl libio-socket-ssl-perl 2.089-1 install ok installed libio-stringy-perl libio-stringy-perl 2.113-2 install ok installed liblz4-1:amd64 liblz4-1 1.9.4-3+b1 install ok installed liblzma5:amd64 liblzma5 5.6.3-1+b1 install ok installed libmail-message-perl libmail-message-perl 3.016-1 install ok installed libmailtools-perl libmailtools-perl 2.22-1 install ok installed libmd0:amd64 libmd0 1.1.0-2+b1 install ok installed libmime-types-perl libmime-types-perl 2.26-1 install ok installed libmount1:amd64 libmount1 2.40.2-12 install ok installed libnet-smtp-ssl-perl libnet-smtp-ssl-perl 1.04-2 install ok installed libnet-ssleay-perl:amd64 libnet-ssleay-perl 1.94-2 install ok installed libnettle8t64:amd64 libnettle8t64 3.10-1+b1 install ok installed libp11-kit0:amd64 libp11-kit0 0.25.5-2+b1 install ok installed libpam-modules:amd64 libpam-modules 1.5.3-7+b1 install ok installed libpam-modules-bin libpam-modules-bin 1.5.3-7+b1 install ok installed libpam-runtime libpam-runtime 1.5.3-7 install ok installed libpam0g:amd64 libpam0g 1.5.3-7+b1 install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.44-4 install ok installed libperl5.40:amd64 libperl5.40 5.40.0-8 install ok installed libseccomp2:amd64 libseccomp2 2.5.5-2 install ok installed libselinux1:amd64 libselinux1 3.7-3+b1 install ok installed libsemanage-common libsemanage-common 3.7-2 install ok installed libsemanage2:amd64 libsemanage2 3.7-2+b1 install ok installed libsepol2:amd64 libsepol2 3.7-1 install ok installed libsmartcols1:amd64 libsmartcols1 2.40.2-12 install ok installed libss2:amd64 libss2 1.47.2~rc1-2 install ok installed libssl3t64:amd64 libssl3t64 3.3.2-2 install ok installed libstdc++6:amd64 libstdc++6 14.2.0-8 install ok installed libsystemd0:amd64 libsystemd0 257~rc3-1 install ok installed libtasn1-6:amd64 libtasn1-6 4.19.0-3+b3 install ok installed libtimedate-perl libtimedate-perl 2.3300-2 install ok installed libtinfo6:amd64 libtinfo6 6.5-2+b1 install ok installed libudev1:amd64 libudev1 257~rc3-1 install ok installed libunistring5:amd64 libunistring5 1.3-1 install ok installed liburi-perl liburi-perl 5.30-1 install ok installed libuser-identity-perl libuser-identity-perl 1.02-1 install ok installed libuuid1:amd64 libuuid1 2.40.2-12 install ok installed libxxhash0:amd64 libxxhash0 0.8.2-2+b2 install ok installed libzstd1:amd64 libzstd1 1.5.6+dfsg-1+b1 install ok installed login login 1:4.16.0-2+really2.40.2-12 install ok installed login.defs login.defs 1:4.16.0-5 install ok installed logsave logsave 1.47.2~rc1-2 install ok installed mawk mawk 1.3.4.20240905-1 install ok installed mount mount 2.40.2-12 install ok installed ncurses-base ncurses-base 6.5-2 install ok installed ncurses-bin ncurses-bin 6.5-2+b1 install ok installed netbase netbase 6.4 install ok installed openssl-provider-legacy openssl-provider-legacy 3.3.2-2 install ok installed passwd passwd 1:4.16.0-5 install ok installed perl perl 5.40.0-8 install ok installed perl-base perl-base 5.40.0-8 install ok installed perl-modules-5.40 perl-modules-5.40 5.40.0-8 install ok installed perl-openssl-defaults:amd64 perl-openssl-defaults 7+b2 install ok installed sed sed 4.9-2 install ok installed sysvinit-utils sysvinit-utils 3.11-1 install ok installed tar tar 1.35+dfsg-3 install ok installed tzdata tzdata 2024b-4 install ok installed usr-is-merged usr-is-merged 39 install ok installed util-linux util-linux 2.40.2-12 install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg+really1.3.1-1+b1 0m18.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n'] 0m18.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', 'remove', 'libauthen-sasl-perl', 'libgdbm-compat4t64:amd64', 'libgdbm6t64:amd64', 'libhash-ordered-perl', 'libio-socket-ssl-perl', 'libio-stringy-perl', 'libmailtools-perl', 'libmime-types-perl', 'libnet-smtp-ssl-perl', 'libnet-ssleay-perl:amd64', 'libperl5.40:amd64', 'libtimedate-perl', 'liburi-perl', 'libuser-identity-perl', 'netbase', 'perl', 'perl-modules-5.40', 'perl-openssl-defaults:amd64', 'libmail-message-perl'] 0m19.5s DUMP: Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: libauthen-sasl-perl libgdbm-compat4t64 libgdbm6t64 libhash-ordered-perl libio-socket-ssl-perl libio-stringy-perl libmail-message-perl libmailtools-perl libmime-types-perl libnet-smtp-ssl-perl libnet-ssleay-perl libperl5.40 libtimedate-perl liburi-perl libuser-identity-perl netbase perl perl-modules-5.40 perl-openssl-defaults 0 upgraded, 0 newly installed, 19 to remove and 0 not upgraded. After this operation, 56.5 MB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 8000 files and directories currently installed.) Removing libauthen-sasl-perl (2.1700-1) ... Removing libmail-message-perl (3.016-1) ... Removing libmailtools-perl (2.22-1) ... Removing libnet-smtp-ssl-perl (1.04-2) ... Removing libio-socket-ssl-perl (2.089-1) ... Removing libnet-ssleay-perl:amd64 (1.94-2) ... Removing libuser-identity-perl (1.02-1) ... Removing liburi-perl (5.30-1) ... Removing libtimedate-perl (2.3300-2) ... Removing libhash-ordered-perl (0.014-2) ... Removing libio-stringy-perl (2.113-2) ... Removing libmime-types-perl (2.26-1) ... Removing netbase (6.4) ... Removing perl-openssl-defaults:amd64 (7+b2) ... Removing perl (5.40.0-8) ... Removing libperl5.40:amd64 (5.40.0-8) ... Removing libgdbm-compat4t64:amd64 (1.24-2) ... Removing libgdbm6t64:amd64 (1.24-2) ... Removing perl-modules-5.40 (5.40.0-8) ... Processing triggers for libc-bin (2.40-4) ... 0m19.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', 'remove', 'libauthen-sasl-perl', 'libgdbm-compat4t64:amd64', 'libgdbm6t64:amd64', 'libhash-ordered-perl', 'libio-socket-ssl-perl', 'libio-stringy-perl', 'libmailtools-perl', 'libmime-types-perl', 'libnet-smtp-ssl-perl', 'libnet-ssleay-perl:amd64', 'libperl5.40:amd64', 'libtimedate-perl', 'liburi-perl', 'libuser-identity-perl', 'netbase', 'perl', 'perl-modules-5.40', 'perl-openssl-defaults:amd64', 'libmail-message-perl'] 0m19.5s INFO: Running scripts post_remove 0m19.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_remove_exceptions'] 0m19.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_remove_exceptions'] 0m19.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg', '--purge', 'libauthen-sasl-perl', 'libgdbm-compat4t64:amd64', 'libgdbm6t64:amd64', 'libhash-ordered-perl', 'libio-socket-ssl-perl', 'libio-stringy-perl', 'libmailtools-perl', 'libmime-types-perl', 'libnet-smtp-ssl-perl', 'libnet-ssleay-perl:amd64', 'libperl5.40:amd64', 'libtimedate-perl', 'liburi-perl', 'libuser-identity-perl', 'netbase', 'perl', 'perl-modules-5.40', 'perl-openssl-defaults:amd64'] 0m19.6s DUMP: dpkg: warning: ignoring request to remove libauthen-sasl-perl which isn't installed dpkg: warning: ignoring request to remove libgdbm-compat4t64 which isn't installed dpkg: warning: ignoring request to remove libgdbm6t64 which isn't installed dpkg: warning: ignoring request to remove libhash-ordered-perl which isn't installed dpkg: warning: ignoring request to remove libio-socket-ssl-perl which isn't installed dpkg: warning: ignoring request to remove libio-stringy-perl which isn't installed dpkg: warning: ignoring request to remove libmailtools-perl which isn't installed dpkg: warning: ignoring request to remove libmime-types-perl which isn't installed dpkg: warning: ignoring request to remove libnet-smtp-ssl-perl which isn't installed dpkg: warning: ignoring request to remove libnet-ssleay-perl which isn't installed dpkg: warning: ignoring request to remove libperl5.40 which isn't installed dpkg: warning: ignoring request to remove libtimedate-perl which isn't installed dpkg: warning: ignoring request to remove liburi-perl which isn't installed dpkg: warning: ignoring request to remove libuser-identity-perl which isn't installed (Reading database ... 5148 files and directories currently installed.) Purging configuration files for netbase (6.4) ... Purging configuration files for perl (5.40.0-8) ... dpkg: warning: ignoring request to remove perl-modules-5.40 which isn't installed dpkg: warning: ignoring request to remove perl-openssl-defaults which isn't installed 0m19.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg', '--purge', 'libauthen-sasl-perl', 'libgdbm-compat4t64:amd64', 'libgdbm6t64:amd64', 'libhash-ordered-perl', 'libio-socket-ssl-perl', 'libio-stringy-perl', 'libmailtools-perl', 'libmime-types-perl', 'libnet-smtp-ssl-perl', 'libnet-ssleay-perl:amd64', 'libperl5.40:amd64', 'libtimedate-perl', 'liburi-perl', 'libuser-identity-perl', 'netbase', 'perl', 'perl-modules-5.40', 'perl-openssl-defaults:amd64'] 0m19.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg', '--purge', 'libmail-message-perl'] 0m19.6s DUMP: dpkg: warning: ignoring request to remove libmail-message-perl which isn't installed 0m19.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg', '--purge', 'libmail-message-perl'] 0m19.6s INFO: Running scripts post_purge 0m19.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_purge_exceptions'] 0m19.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_purge_exceptions'] 0m19.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg', '--purge', '--pending'] 0m19.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg', '--purge', '--pending'] 0m19.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg', '--remove', '--pending'] 0m19.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg', '--remove', '--pending'] 0m19.6s INFO: Running scripts post_test 0m19.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_test_exceptions'] 0m19.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'tmp/scripts/post_test_exceptions'] 0m19.6s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m20.0s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m20.8s DEBUG: No broken symlinks as far as we can find. 0m20.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg-divert', '--list'] 0m20.8s DUMP: diversion of /lib/x86_64-linux-gnu/libe2p.so.2 to /lib/x86_64-linux-gnu/libe2p.so.2.usr-is-merged by libext2fs2t64 local diversion of /bin/sync to /bin/sync.distrib.usr-is-merged diversion of /lib/x86_64-linux-gnu/libext2fs.so.2.4 to /lib/x86_64-linux-gnu/libext2fs.so.2.4.usr-is-merged by libext2fs2t64 local diversion of /home to /home.distrib diversion of /lib64/ld-linux-x86-64.so.2 to /lib64/ld-linux-x86-64.so.2.usr-is-merged by libc6 diversion of /lib/x86_64-linux-gnu/libext2fs.so.2 to /lib/x86_64-linux-gnu/libext2fs.so.2.usr-is-merged by libext2fs2t64 diversion of /lib/x86_64-linux-gnu/libe2p.so.2.3 to /lib/x86_64-linux-gnu/libe2p.so.2.3.usr-is-merged by libext2fs2t64 diversion of /libx32 to /.libx32.usr-is-merged by base-files local diversion of /usr/bin/sync to /usr/bin/sync.distrib diversion of /lib32 to /.lib32.usr-is-merged by base-files diversion of /libo32 to /.libo32.usr-is-merged by base-files 0m20.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'dpkg-divert', '--list'] 0m20.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', 'clean'] 0m20.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1', 'apt-get', 'clean'] 0m20.9s DEBUG: Recording chroot state 0m21.6s INFO: PASS: Installation and purging test. 0m22.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/shm'] 0m22.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/shm'] 0m22.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/console'] 0m22.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/console'] 0m22.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/ptmx'] 0m22.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/ptmx'] 0m22.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/pts'] 0m22.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/dev/pts'] 0m22.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/proc'] 0m22.2s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1/proc'] 0m22.2s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m22.3s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpy0gsstz1'] 0m22.3s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpy0gsstz1 0m22.3s INFO: PASS: All tests. 0m22.3s INFO: piuparts run ends. ret=0 End: 2024-12-10 03:01:46 GMT