team+homeassistant@tracker.debian.org in trixie-rcmd
|
other distributions: | experimental sid2experimental sid sid-strict sid-nodoc sid-merged-usr sid-broken-symlinks testing2sid trixie bookworm bookworm-rcmd bookworm-security bookworm-pu bookworm2next bullseye bullseye-rcmd bullseye-security bullseye-pu bullseye2next stable2sid stable22sid buster buster-rcmd buster-security buster-pu buster2next stretch2buster stretch2Xbuster stretch2buster-rcmd stretch2Xbuster-rcmd stretch2bpo2buster stretch2bpo stretch stretch-rcmd stretch-security stretch-pu stretch2next oldstable222sid oldstable22testing jessie2stretch jessie2Xstretch jessie2stretch-rcmd jessie2Xstretch-rcmd jessie-lts2stretch jessie2bpo2stretch jessie2bpo jessie2lts jessie jessie-rcmd jessie-security |
fail: | 0 | |
unknown: | 0 | |
pass: | 366 | aioconsole aioelectricitymaps aiopegelonline aiopurpleair aiortsp aiosteamist aiotankerkoenig aiowatttime airthings-ble airthings-cloud aqipy blebox-uniapi blinkpy bluemaestro-ble bthome-ble devolo-home-control-api devolo-plc-api emulated-roku eternalegypt file-read-backwards fjaraskupan flexit-bacnet forecast-solar fritzconnection goalzero govee-local-api growattserver hatasmota hlk-sw16 iaqualink inkbird-ble jellyfin-apiclient-python justbackoff lacrosse-view laundrify-aio leaone-ble linear-garage-door lupupy mbddns meater-python medcom-ble meteofrance-api millheater moat-ble monzopy ndms2-client nsw-fuel-api-client openwebifpy ourgroceries progettihwsw py-aosmith py-canary py-dormakaba-dkey py-improv-ble-client py-nightscout pyaehw4a1 pyairnow pyasuswrt pyatmo pybalboa pybotvac pybravia pycec pycfdns pycognito pycomfoconnect pycontrol4 pycsspeechtts pydeconz pydiscovergy pydroid-ipcam pyduotecno pyecoforest pyeconet pyecotrend-ista pyegps pyelectra pyevilgenius pyfibaro pyflic pyforked-daapd pyfritzhome pyfttt pygti pyhaversion pyhomematic pyhomeworks pyialarm pyipp pyiqvia pyisy pyjvcprojector pykira pykulersky pylaunches pylgnetcast pylibrespot-java pylutron-caseta pymailgunner pymeteireann pymetno pymicrobot pymonoprice pynobo pynuki pynx584 pyoctoprintapi pyotgw pypjlink2 pyplaato pypoint pyprosegur pyrfxtrx pyrisco pyrituals pyroon pyschlage pyserial-asyncio-fast pysignalclirestapi pysma pysmappee pysmartapp pysuez pyswitchbee pyswitchbot pytedee-async pytest-freezer python-accuweather python-adax-local python-adb-shell python-adext python-adguardhome python-advantage-air python-aemet-opendata python-aenum python-afsapi python-agent-py python-aio-geojson-client python-aio-geojson-generic-client python-aio-geojson-geonetnz-quakes python-aio-geojson-geonetnz-volcano python-aio-geojson-nsw-rfs-incidents python-aio-geojson-usgs-earthquakes python-aio-georss-client python-aio-georss-gdacs python-aioairq python-aioairzone-cloud python-aioambient python-aioasuswrt python-aioazuredevops python-aioeafm python-aioemonitor python-aioesphomeapi python-aioguardian python-aioharmony python-aiohomekit python-aiohue python-aiolifx python-aiolifx-effects python-aiolifx-themes python-aiolivisi python-aiomusiccast python-aionanoleaf python-aionut python-aiooncue python-aioopenexchangerates python-aiopulse python-aiopvapi python-aiopvpc python-aiopyarr python-aioqsw python-aiorecollect python-aioridwell python-aioruckus python-aiosenz python-aioserial python-aioshelly python-aioskybell python-aiosolaredge python-aiosomecomfort python-aiotractive python-aiounifi python-aiovlc python-aiowaqi python-airgradient python-airtouch4pyapi python-airtouch5py python-alarmdecoder python-amberelectric python-androidtv python-androidtvremote2 python-anova-wifi python-anthemav python-apischema python-aprslib python-apsystems-ez1 python-aranet4 python-arcam-fmj python-asyncarve python-asyncio-throttle python-asyncsleepiq python-auroranoaa python-awair python-bimmer-connected python-bleak-esphome python-bluecurrent-api python-bond-async python-boschshcpy python-bring-api python-bsblan python-chacha20poly1305 python-chacha20poly1305-reuseable python-connio python-convertertools python-crc python-crownstone-cloud python-devialet python-dicttoxml2 python-dropmqttapi python-ecobee-api python-elgato python-elmax-api python-energyzero python-enocean python-envoy-utils python-fnv-hash-fast python-fnvhash python-foobot-async python-foscam python-freebox-api python-gardena-bluetooth python-georss-client python-gios python-glances-api python-goodwe python-googlemaps python-gql python-gridnet python-gspread python-hole python-homeconnect python-homewizard-energy python-http-ece python-humps python-hyperion-py python-ibeacon-ble python-idasen python-idasen-ha python-incomfort-client python-inquirerpy python-intellifire4py python-jsonrpc-base python-justnimbus python-luftdaten python-mill-local python-moehlenhoff-alpha2 python-motionmount python-ms-cv python-mullvad-api python-mutesync python-mystrom python-myuplink python-noiseprotocol python-nuheat python-odp-amsterdam python-ondilo python-opendata-transport python-openerz-api python-opuslib python-ovoenergy python-p1monitor python-peco python-phone-modem python-picnic-api python-pkce python-plugwise python-psutil-home-assistant python-pure-pcapy3 python-pure-python-adb python-pyflume python-pynetgear python-pytest-freezegun python-rabbitair python-radios python-renault-api python-roborock python-rokuecp python-romy python-rxv python-samsungctl python-sanix python-sharkiq python-simplehound python-simplepush python-snapcast python-songpal python-starline python-tado python-tailscale python-technove python-titlecase python-toonapi python-ttls python-twentemilieu python-uiprotect python-umodbus python-vehicle python-voip-utils python-vsure python-vultr python-wiffi python-wolf-comm python-xiaomi-ble python-yalexs python-yolink-api python-youless-api python-youtubeaio pytile pytrafikverket pytrydan pyvesync pyvicare pyvlx pyvolumio pyws66i pyxiaomigateway qingping-ble rachiopy radiotherm rapt-ble regenmaschine renson-endura-delta rpi-bad-power rtsp-to-webrtc ruuvitag-ble sensorpro-ble sensorpush-ble simplisafe-python smart-meter-texas somfy-mylink-synergy sonos-websocket spotipy stdio-mgr stookalert stookwijzer striprtf sunweg surepy switchbot-api systembridgemodels tesla-powerwall tesla-wall-connector tessie-api thermopro-ble tilt-ble todoist-api-python tplink-omada-client ultraheat-api vacuum-map-parser-roborock vincenty voluptuous-openapi webmin-xmlrpc yalexs-ble zigpy-zigate zwave-js-server-python zwave-me-ws |
aioconsole in trixie-rcmd |
Source: | aioconsole | piuparts summary: | | Version: | 0.8.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-aioconsole:all | piuparts-result: | successfully-tested 0.8.1-2 | Version: | 0.8.1-2 |
aioelectricitymaps in trixie-rcmd |
Source: | aioelectricitymaps | piuparts summary: | | Version: | 1.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-aioelectricitymaps:all | piuparts-result: | successfully-tested 1.0.0-2 | Version: | 1.0.0-2 |
aiopegelonline in trixie-rcmd |
Source: | aiopegelonline | piuparts summary: | | Version: | 0.1.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-aiopegelonline:all | piuparts-result: | successfully-tested 0.1.0-1 | Version: | 0.1.0-1 |
aiopurpleair in trixie-rcmd |
Source: | aiopurpleair | piuparts summary: | | Version: | 2023.12.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-aiopurpleair:all | piuparts-result: | successfully-tested 2023.12.0-2 | Version: | 2023.12.0-2 |
aiortsp in trixie-rcmd |
Source: | aiortsp | piuparts summary: | | Version: | 1.4.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-aiortsp:all | piuparts-result: | successfully-tested 1.4.0-1 | Version: | 1.4.0-1 |
aiosteamist in trixie-rcmd |
Source: | aiosteamist | piuparts summary: | | Version: | 1.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-aiosteamist:all | piuparts-result: | successfully-tested 1.0.0-2 | Version: | 1.0.0-2 |
aiotankerkoenig in trixie-rcmd |
Source: | aiotankerkoenig | piuparts summary: | | Version: | 0.4.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-aiotankerkoenig:all | piuparts-result: | successfully-tested 0.4.2-1 | Version: | 0.4.2-1 |
aiowatttime in trixie-rcmd |
Source: | aiowatttime | piuparts summary: | | Version: | 2024.6.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-aiowatttime:all | piuparts-result: | successfully-tested 2024.6.0-2 | Version: | 2024.6.0-2 |
airthings-ble in trixie-rcmd |
Source: | airthings-ble | piuparts summary: | | Version: | 0.9.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-airthings-ble:all | piuparts-result: | successfully-tested 0.9.2-1 | Version: | 0.9.2-1 |
airthings-cloud in trixie-rcmd |
Source: | airthings-cloud | piuparts summary: | | Version: | 0.2.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-airthings-cloud:all | piuparts-result: | successfully-tested 0.2.0-2 | Version: | 0.2.0-2 |
aqipy in trixie-rcmd |
Source: | aqipy | piuparts summary: | | Version: | 0.4.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-aqipy:all | piuparts-result: | successfully-tested 0.4.1-2 | Version: | 0.4.1-2 |
blebox-uniapi in trixie-rcmd |
Source: | blebox-uniapi | piuparts summary: | | Version: | 2.5.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-blebox-uniapi:all | piuparts-result: | successfully-tested 2.5.0-3 | Version: | 2.5.0-3 |
blinkpy in trixie-rcmd |
Source: | blinkpy | piuparts summary: | | Version: | 0.23.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-blinkpy:all | piuparts-result: | successfully-tested 0.23.0-2 | Version: | 0.23.0-2 |
bluemaestro-ble in trixie-rcmd |
Source: | bluemaestro-ble | piuparts summary: | | Version: | 0.2.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-bluemaestro-ble:all | piuparts-result: | successfully-tested 0.2.3-2 | Version: | 0.2.3-2 |
bthome-ble in trixie-rcmd |
Source: | bthome-ble | piuparts summary: | | Version: | 3.11.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-bthome-ble:all | piuparts-result: | successfully-tested 3.11.0-1 | Version: | 3.11.0-1 |
devolo-home-control-api in trixie-rcmd |
Source: | devolo-home-control-api | piuparts summary: | | Version: | 0.18.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-devolo-home-control-api:all | piuparts-result: | successfully-tested 0.18.3-2 | Version: | 0.18.3-2 |
devolo-plc-api in trixie-rcmd |
Source: | devolo-plc-api | piuparts summary: | | Version: | 1.4.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-devolo-plc-api:all | piuparts-result: | successfully-tested 1.4.1-2 | Version: | 1.4.1-2 |
emulated-roku in trixie-rcmd |
Source: | emulated-roku | piuparts summary: | | Version: | 0.3.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-emulated-roku:all | piuparts-result: | successfully-tested 0.3.0-2 | Version: | 0.3.0-2 |
eternalegypt in trixie-rcmd |
Source: | eternalegypt | piuparts summary: | | Version: | 0.0.16-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-eternalegypt:all | piuparts-result: | successfully-tested 0.0.16-2 | Version: | 0.0.16-2 |
file-read-backwards in trixie-rcmd |
Source: | file-read-backwards | piuparts summary: | | Version: | 3.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-file-read-backwards:all | piuparts-result: | successfully-tested 3.1.0-2 | Version: | 3.1.0-2 |
fjaraskupan in trixie-rcmd |
Source: | fjaraskupan | piuparts summary: | | Version: | 2.3.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-fjaraskupan:all | piuparts-result: | successfully-tested 2.3.0-2 | Version: | 2.3.0-2 |
flexit-bacnet in trixie-rcmd |
Source: | flexit-bacnet | piuparts summary: | | Version: | 2.2.1-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-flexit-bacnet:all | piuparts-result: | successfully-tested 2.2.1-1.1 | Version: | 2.2.1-1.1 |
forecast-solar in trixie-rcmd |
Source: | forecast-solar | piuparts summary: | | Version: | 3.1.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-forecast-solar:all | piuparts-result: | successfully-tested 3.1.0-3 | Version: | 3.1.0-3 |
fritzconnection in trixie-rcmd |
Source: | fritzconnection | piuparts summary: | | Version: | 1.14.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-fritzconnection:all | piuparts-result: | successfully-tested 1.14.0-2 | Version: | 1.14.0-2 |
goalzero in trixie-rcmd |
Source: | goalzero | piuparts summary: | | Version: | 0.2.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-goalzero:all | piuparts-result: | successfully-tested 0.2.2-2 | Version: | 0.2.2-2 |
govee-local-api in trixie-rcmd |
Source: | govee-local-api | piuparts summary: | | Version: | 1.5.3-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-govee-local-api:all | piuparts-result: | successfully-tested 1.5.3-1 | Version: | 1.5.3-1 |
growattserver in trixie-rcmd |
Source: | growattserver | piuparts summary: | | Version: | 1.6.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-growattserver:all | piuparts-result: | successfully-tested 1.6.0-1 | Version: | 1.6.0-1 |
hatasmota in trixie-rcmd |
Source: | hatasmota | piuparts summary: | | Version: | 0.9.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-hatasmota:all | piuparts-result: | successfully-tested 0.9.2-2 | Version: | 0.9.2-2 |
hlk-sw16 in trixie-rcmd |
Source: | hlk-sw16 | piuparts summary: | | Version: | 0.0.9-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-hlk-sw16:all | piuparts-result: | successfully-tested 0.0.9-2 | Version: | 0.0.9-2 |
iaqualink in trixie-rcmd |
Source: | iaqualink | piuparts summary: | | Version: | 0.5.1~beta-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-iaqualink:all | piuparts-result: | successfully-tested 0.5.1~beta-1 | Version: | 0.5.1~beta-1 |
inkbird-ble in trixie-rcmd |
Source: | inkbird-ble | piuparts summary: | | Version: | 0.5.8-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-inkbird-ble:all | piuparts-result: | successfully-tested 0.5.8-2 | Version: | 0.5.8-2 |
jellyfin-apiclient-python in trixie-rcmd |
Source: | jellyfin-apiclient-python | piuparts summary: | | Version: | 1.10.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-jellyfin-apiclient-python:all | piuparts-result: | successfully-tested 1.10.0-2 | Version: | 1.10.0-2 |
justbackoff in trixie-rcmd |
Source: | justbackoff | piuparts summary: | | Version: | 0.6.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-justbackoff:all | piuparts-result: | successfully-tested 0.6.0-2 | Version: | 0.6.0-2 |
lacrosse-view in trixie-rcmd |
Source: | lacrosse-view | piuparts summary: | | Version: | 1.0.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-lacrosse-view:all | piuparts-result: | successfully-tested 1.0.3-2 | Version: | 1.0.3-2 |
laundrify-aio in trixie-rcmd |
Source: | laundrify-aio | piuparts summary: | | Version: | 1.2.2-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-laundrify-aio:all | piuparts-result: | successfully-tested 1.2.2-3 | Version: | 1.2.2-3 |
leaone-ble in trixie-rcmd |
Source: | leaone-ble | piuparts summary: | | Version: | 0.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-leaone-ble:all | piuparts-result: | successfully-tested 0.1.0-2 | Version: | 0.1.0-2 |
linear-garage-door in trixie-rcmd |
Source: | linear-garage-door | piuparts summary: | | Version: | 0.2.10-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-linear-garage-door:all | piuparts-result: | successfully-tested 0.2.10-2 | Version: | 0.2.10-2 |
lupupy in trixie-rcmd |
Source: | lupupy | piuparts summary: | | Version: | 0.3.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-lupupy:all | piuparts-result: | successfully-tested 0.3.2-2 | Version: | 0.3.2-2 |
mbddns in trixie-rcmd |
Source: | mbddns | piuparts summary: | | Version: | 0.1.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-mbddns:all | piuparts-result: | successfully-tested 0.1.2-2 | Version: | 0.1.2-2 |
meater-python in trixie-rcmd |
Source: | meater-python | piuparts summary: | | Version: | 0.0.8-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-meater-python:all | piuparts-result: | successfully-tested 0.0.8-2 | Version: | 0.0.8-2 |
medcom-ble in trixie-rcmd |
Source: | medcom-ble | piuparts summary: | | Version: | 0.1.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-medcom-ble:all | piuparts-result: | successfully-tested 0.1.1-2 | Version: | 0.1.1-2 |
meteofrance-api in trixie-rcmd |
Source: | meteofrance-api | piuparts summary: | | Version: | 1.3.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-meteofrance-api:all | piuparts-result: | successfully-tested 1.3.0-2 | Version: | 1.3.0-2 |
millheater in trixie-rcmd |
Source: | millheater | piuparts summary: | | Version: | 0.12.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-millheater:all | piuparts-result: | successfully-tested 0.12.2-1 | Version: | 0.12.2-1 |
moat-ble in trixie-rcmd |
Source: | moat-ble | piuparts summary: | | Version: | 0.1.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-moat-ble:all | piuparts-result: | successfully-tested 0.1.1-2 | Version: | 0.1.1-2 |
monzopy in trixie-rcmd |
Source: | monzopy | piuparts summary: | | Version: | 1.3.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-monzopy:all | piuparts-result: | successfully-tested 1.3.2-1 | Version: | 1.3.2-1 |
ndms2-client in trixie-rcmd |
Source: | ndms2-client | piuparts summary: | | Version: | 0.1.3-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-ndms2-client:all | piuparts-result: | successfully-tested 0.1.3-3 | Version: | 0.1.3-3 |
nsw-fuel-api-client in trixie-rcmd |
Source: | nsw-fuel-api-client | piuparts summary: | | Version: | 1.1.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-nsw-fuel-api-client:all | piuparts-result: | successfully-tested 1.1.3-2 | Version: | 1.1.3-2 |
openwebifpy in trixie-rcmd |
Source: | openwebifpy | piuparts summary: | | Version: | 4.3.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-openwebifpy:all | piuparts-result: | successfully-tested 4.3.0-1 | Version: | 4.3.0-1 |
ourgroceries in trixie-rcmd |
Source: | ourgroceries | piuparts summary: | | Version: | 1.5.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-ourgroceries:all | piuparts-result: | successfully-tested 1.5.4-2 | Version: | 1.5.4-2 |
progettihwsw in trixie-rcmd |
Source: | progettihwsw | piuparts summary: | | Version: | 0.1.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-progettihwsw:all | piuparts-result: | successfully-tested 0.1.3-2 | Version: | 0.1.3-2 |
py-aosmith in trixie-rcmd |
Source: | py-aosmith | piuparts summary: | | Version: | 1.0.12-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-py-aosmith:all | piuparts-result: | successfully-tested 1.0.12-1 | Version: | 1.0.12-1 |
py-canary in trixie-rcmd |
Source: | py-canary | piuparts summary: | | Version: | 0.5.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-canary:all | piuparts-result: | successfully-tested 0.5.4-2 | Version: | 0.5.4-2 |
py-dormakaba-dkey in trixie-rcmd |
Source: | py-dormakaba-dkey | piuparts summary: | | Version: | 1.0.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-py-dormakaba-dkey:all | piuparts-result: | successfully-tested 1.0.5-2 | Version: | 1.0.5-2 |
py-improv-ble-client in trixie-rcmd |
Source: | py-improv-ble-client | piuparts summary: | | Version: | 1.0.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-py-improv-ble-client:all | piuparts-result: | successfully-tested 1.0.4-2 | Version: | 1.0.4-2 |
py-nightscout in trixie-rcmd |
Source: | py-nightscout | piuparts summary: | | Version: | 1.3.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-py-nightscout:all | piuparts-result: | successfully-tested 1.3.3-2 | Version: | 1.3.3-2 |
pyaehw4a1 in trixie-rcmd |
Source: | pyaehw4a1 | piuparts summary: | | Version: | 0.3.9-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyaehw4a1:all | piuparts-result: | successfully-tested 0.3.9-2 | Version: | 0.3.9-2 |
pyairnow in trixie-rcmd |
Source: | pyairnow | piuparts summary: | | Version: | 1.2.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyairnow:all | piuparts-result: | successfully-tested 1.2.2-1 | Version: | 1.2.2-1 |
pyasuswrt in trixie-rcmd |
Source: | pyasuswrt | piuparts summary: | | Version: | 0.1.21-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyasuswrt:all | piuparts-result: | successfully-tested 0.1.21-2 | Version: | 0.1.21-2 |
pyatmo in trixie-rcmd |
Source: | pyatmo | piuparts summary: | | Version: | 8.1.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyatmo:all | piuparts-result: | successfully-tested 8.1.0-1.1 | Version: | 8.1.0-1.1 |
pybalboa in trixie-rcmd |
Source: | pybalboa | piuparts summary: | | Version: | 1.0.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pybalboa:all | piuparts-result: | successfully-tested 1.0.2-2 | Version: | 1.0.2-2 |
pybotvac in trixie-rcmd |
Source: | pybotvac | piuparts summary: | | Version: | 0.0.25+really0.0.25-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pybotvac:all | piuparts-result: | successfully-tested 0.0.25+really0.0.25-1 | Version: | 0.0.25+really0.0.25-1 |
pybravia in trixie-rcmd |
Source: | pybravia | piuparts summary: | | Version: | 0.3.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pybravia:all | piuparts-result: | successfully-tested 0.3.4-2 | Version: | 0.3.4-2 |
pycec in trixie-rcmd |
Source: | pycec | piuparts summary: | | Version: | 0.6.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pycec:all | piuparts-result: | successfully-tested 0.6.0-1 | Version: | 0.6.0-1 |
pycfdns in trixie-rcmd |
Source: | pycfdns | piuparts summary: | | Version: | 3.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pycfdns:all | piuparts-result: | successfully-tested 3.0.0-2 | Version: | 3.0.0-2 |
pycognito in trixie-rcmd |
Source: | pycognito | piuparts summary: | | Version: | 2024.5.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pycognito:all | piuparts-result: | successfully-tested 2024.5.1-2 | Version: | 2024.5.1-2 |
pycomfoconnect in trixie-rcmd |
Source: | pycomfoconnect | piuparts summary: | | Version: | 0.5.1-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pycomfoconnect:all | piuparts-result: | successfully-tested 0.5.1-1.1 | Version: | 0.5.1-1.1 |
pycontrol4 in trixie-rcmd |
Source: | pycontrol4 | piuparts summary: | | Version: | 1.2.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pycontrol4:all | piuparts-result: | successfully-tested 1.2.1-1 | Version: | 1.2.1-1 |
pycsspeechtts in trixie-rcmd |
Source: | pycsspeechtts | piuparts summary: | | Version: | 1.0.8-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pycsspeechtts:all | piuparts-result: | successfully-tested 1.0.8-2 | Version: | 1.0.8-2 |
pydeconz in trixie-rcmd |
Source: | pydeconz | piuparts summary: | | Version: | 118-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pydeconz:all | piuparts-result: | successfully-tested 118-1 | Version: | 118-1 |
pydiscovergy in trixie-rcmd |
Source: | pydiscovergy | piuparts summary: | | Version: | 3.0.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pydiscovergy:all | piuparts-result: | successfully-tested 3.0.2-1 | Version: | 3.0.2-1 |
pydroid-ipcam in trixie-rcmd |
Source: | pydroid-ipcam | piuparts summary: | | Version: | 2.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pydroid-ipcam:all | piuparts-result: | successfully-tested 2.0.0-2 | Version: | 2.0.0-2 |
pyduotecno in trixie-rcmd |
Source: | pyduotecno | piuparts summary: | | Version: | 2024.10.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyduotecno:all | piuparts-result: | successfully-tested 2024.10.1-1 | Version: | 2024.10.1-1 |
pyecoforest in trixie-rcmd |
Source: | pyecoforest | piuparts summary: | | Version: | 0.4.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyecoforest:all | piuparts-result: | successfully-tested 0.4.0-2 | Version: | 0.4.0-2 |
pyeconet in trixie-rcmd |
Source: | pyeconet | piuparts summary: | | Version: | 0.1.23-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyeconet:all | piuparts-result: | successfully-tested 0.1.23-2 | Version: | 0.1.23-2 |
pyecotrend-ista in trixie-rcmd |
Source: | pyecotrend-ista | piuparts summary: | | Version: | 3.3.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyecotrend-ista:all | piuparts-result: | successfully-tested 3.3.2-2 | Version: | 3.3.2-2 |
pyegps in trixie-rcmd |
Source: | pyegps | piuparts summary: | | Version: | 0.2.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyegps:all | piuparts-result: | successfully-tested 0.2.5-2 | Version: | 0.2.5-2 |
pyelectra in trixie-rcmd |
Source: | pyelectra | piuparts summary: | | Version: | 1.2.4-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pyelectra:all | piuparts-result: | successfully-tested 1.2.4-1 | Version: | 1.2.4-1 |
pyevilgenius in trixie-rcmd |
Source: | pyevilgenius | piuparts summary: | | Version: | 2.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyevilgenius:all | piuparts-result: | successfully-tested 2.0.0-2 | Version: | 2.0.0-2 |
pyfibaro in trixie-rcmd |
Source: | pyfibaro | piuparts summary: | | Version: | 0.8.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyfibaro:all | piuparts-result: | successfully-tested 0.8.0-1 | Version: | 0.8.0-1 |
pyflic in trixie-rcmd |
Source: | pyflic | piuparts summary: | | Version: | 2.0.3-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyflic:all | piuparts-result: | successfully-tested 2.0.3-1.1 | Version: | 2.0.3-1.1 |
pyforked-daapd in trixie-rcmd |
Source: | pyforked-daapd | piuparts summary: | | Version: | 0.1.14-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyforked-daapd:all | piuparts-result: | successfully-tested 0.1.14-2 | Version: | 0.1.14-2 |
pyfritzhome in trixie-rcmd |
Source: | pyfritzhome | piuparts summary: | | Version: | 0.6.12-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyfritzhome:all | piuparts-result: | successfully-tested 0.6.12-2 | Version: | 0.6.12-2 |
pyfttt in trixie-rcmd |
Source: | pyfttt | piuparts summary: | | Version: | 0.3.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyfttt:all | piuparts-result: | successfully-tested 0.3.2-2 | Version: | 0.3.2-2 |
pygti in trixie-rcmd |
Source: | pygti | piuparts summary: | | Version: | 0.9.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pygti:all | piuparts-result: | successfully-tested 0.9.4-2 | Version: | 0.9.4-2 |
pyhaversion in trixie-rcmd |
Source: | pyhaversion | piuparts summary: | | Version: | 24.6.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pyhaversion:all | piuparts-result: | successfully-tested 24.6.1-2 | Version: | 24.6.1-2 |
pyhomematic in trixie-rcmd |
Source: | pyhomematic | piuparts summary: | | Version: | 0.1.78-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyhomematic:all | piuparts-result: | successfully-tested 0.1.78-2 | Version: | 0.1.78-2 |
pyhomeworks in trixie-rcmd |
Source: | pyhomeworks | piuparts summary: | | Version: | 1.1.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyhomeworks:all | piuparts-result: | successfully-tested 1.1.2-2 | Version: | 1.1.2-2 |
pyialarm in trixie-rcmd |
Source: | pyialarm | piuparts summary: | | Version: | 2.2.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyialarm:all | piuparts-result: | successfully-tested 2.2.0-2 | Version: | 2.2.0-2 |
pyipp in trixie-rcmd |
Source: | pyipp | piuparts summary: | | Version: | 0.17.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyipp:all | piuparts-result: | successfully-tested 0.17.0-1 | Version: | 0.17.0-1 |
pyiqvia in trixie-rcmd |
Source: | pyiqvia | piuparts summary: | | Version: | 2023.12.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyiqvia:all | piuparts-result: | successfully-tested 2023.12.0-2 | Version: | 2023.12.0-2 |
pyisy in trixie-rcmd |
Source: | pyisy | piuparts summary: | | Version: | 3.1.14-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyisy:all | piuparts-result: | successfully-tested 3.1.14-2 | Version: | 3.1.14-2 |
pyjvcprojector in trixie-rcmd |
Source: | pyjvcprojector | piuparts summary: | | Version: | 1.1.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyjvcprojector:all | piuparts-result: | successfully-tested 1.1.2-1 | Version: | 1.1.2-1 |
pykira in trixie-rcmd |
Source: | pykira | piuparts summary: | | Version: | 0.1.3-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pykira:all | piuparts-result: | successfully-tested 0.1.3-1.1 | Version: | 0.1.3-1.1 |
pykulersky in trixie-rcmd |
Source: | pykulersky | piuparts summary: | | Version: | 0.5.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pykulersky:all | piuparts-result: | successfully-tested 0.5.5-2 | Version: | 0.5.5-2 |
pylaunches in trixie-rcmd |
Source: | pylaunches | piuparts summary: | | Version: | 2.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pylaunches:all | piuparts-result: | successfully-tested 2.0.0-2 | Version: | 2.0.0-2 |
pylgnetcast in trixie-rcmd |
Source: | pylgnetcast | piuparts summary: | | Version: | 0.3.9-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pylgnetcast:all | piuparts-result: | successfully-tested 0.3.9-2 | Version: | 0.3.9-2 |
pylibrespot-java in trixie-rcmd |
Source: | pylibrespot-java | piuparts summary: | | Version: | 0.1.1-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pylibrespot-java:all | piuparts-result: | successfully-tested 0.1.1-1.1 | Version: | 0.1.1-1.1 |
pylutron-caseta in trixie-rcmd |
Source: | pylutron-caseta | piuparts summary: | | Version: | 0.22.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pylutron-caseta:all | piuparts-result: | successfully-tested 0.22.0-1 | Version: | 0.22.0-1 |
pymailgunner in trixie-rcmd |
Source: | pymailgunner | piuparts summary: | | Version: | 1.5-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pymailgunner:all | piuparts-result: | successfully-tested 1.5-3 | Version: | 1.5-3 |
pymeteireann in trixie-rcmd |
Source: | pymeteireann | piuparts summary: | | Version: | 2024.11.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-meteireann:all | piuparts-result: | successfully-tested 2024.11.0-1 | Version: | 2024.11.0-1 |
pymetno in trixie-rcmd |
Source: | pymetno | piuparts summary: | | Version: | 0.13.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pymetno:all | piuparts-result: | successfully-tested 0.13.0-1 | Version: | 0.13.0-1 |
pymicrobot in trixie-rcmd |
Source: | pymicrobot | piuparts summary: | | Version: | 0.0.22-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pymicrobot:all | piuparts-result: | successfully-tested 0.0.22-2 | Version: | 0.0.22-2 |
pymonoprice in trixie-rcmd |
Source: | pymonoprice | piuparts summary: | | Version: | 0.4-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pymonoprice:all | piuparts-result: | successfully-tested 0.4-3 | Version: | 0.4-3 |
pynobo in trixie-rcmd |
Source: | pynobo | piuparts summary: | | Version: | 1.8.1-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pynobo:all | piuparts-result: | successfully-tested 1.8.1-1.1 | Version: | 1.8.1-1.1 |
pynuki in trixie-rcmd |
Source: | pynuki | piuparts summary: | | Version: | 1.6.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pynuki:all | piuparts-result: | successfully-tested 1.6.3-2 | Version: | 1.6.3-2 |
pynx584 in trixie-rcmd |
Source: | pynx584 | piuparts summary: | | Version: | 0.8.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pynx584:all | piuparts-result: | successfully-tested 0.8.2-2 | Version: | 0.8.2-2 |
pyoctoprintapi in trixie-rcmd |
Source: | pyoctoprintapi | piuparts summary: | | Version: | 0.1.14-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pyoctoprintapi:all | piuparts-result: | successfully-tested 0.1.14-2 | Version: | 0.1.14-2 |
pyotgw in trixie-rcmd |
Source: | pyotgw | piuparts summary: | | Version: | 2.2.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyotgw:all | piuparts-result: | successfully-tested 2.2.2-1 | Version: | 2.2.2-1 |
pypjlink2 in trixie-rcmd |
Source: | pypjlink2 | piuparts summary: | | Version: | 1.2.2-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pypjlink2:all | piuparts-result: | successfully-tested 1.2.2-3 | Version: | 1.2.2-3 |
pyplaato in trixie-rcmd |
Source: | pyplaato | piuparts summary: | | Version: | 0.0.19-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyplaato:all | piuparts-result: | successfully-tested 0.0.19-1 | Version: | 0.0.19-1 |
pypoint in trixie-rcmd |
Source: | pypoint | piuparts summary: | | Version: | 3.0.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pypoint:all | piuparts-result: | successfully-tested 3.0.1-1 | Version: | 3.0.1-1 |
pyprosegur in trixie-rcmd |
Source: | pyprosegur | piuparts summary: | | Version: | 0.0.12-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyprosegur:all | piuparts-result: | successfully-tested 0.0.12-1 | Version: | 0.0.12-1 |
pyrfxtrx in trixie-rcmd |
Source: | pyrfxtrx | piuparts summary: | | Version: | 0.31.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyrfxtrx:all | piuparts-result: | successfully-tested 0.31.1-2 | Version: | 0.31.1-2 |
pyrisco in trixie-rcmd |
Source: | pyrisco | piuparts summary: | | Version: | 0.7.0~rc0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyrisco:all | piuparts-result: | successfully-tested 0.7.0~rc0-1 | Version: | 0.7.0~rc0-1 |
pyrituals in trixie-rcmd |
Source: | pyrituals | piuparts summary: | | Version: | 0.0.6-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyrituals:all | piuparts-result: | successfully-tested 0.0.6-2 | Version: | 0.0.6-2 |
pyroon in trixie-rcmd |
Source: | pyroon | piuparts summary: | | Version: | 0.1.6-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-roonapi:all | piuparts-result: | successfully-tested 0.1.6-2 | Version: | 0.1.6-2 |
pyschlage in trixie-rcmd |
Source: | pyschlage | piuparts summary: | | Version: | 2024.11.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyschlage:all | piuparts-result: | successfully-tested 2024.11.0-1 | Version: | 2024.11.0-1 |
pyserial-asyncio-fast in trixie-rcmd |
Source: | pyserial-asyncio-fast | piuparts summary: | | Version: | 0.14-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pyserial-asyncio-fast:all | piuparts-result: | successfully-tested 0.14-2 | Version: | 0.14-2 |
pysignalclirestapi in trixie-rcmd |
Source: | pysignalclirestapi | piuparts summary: | | Version: | 0.3.24-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pysignalclirestapi:all | piuparts-result: | successfully-tested 0.3.24-2 | Version: | 0.3.24-2 |
pysma in trixie-rcmd |
Source: | pysma | piuparts summary: | | Version: | 0.7.5-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pysma:all | piuparts-result: | successfully-tested 0.7.5-1.1 | Version: | 0.7.5-1.1 |
pysmappee in trixie-rcmd |
Source: | pysmappee | piuparts summary: | | Version: | 0.2.29-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pysmappee:all | piuparts-result: | successfully-tested 0.2.29-2 | Version: | 0.2.29-2 |
pysmartapp in trixie-rcmd |
Source: | pysmartapp | piuparts summary: | | Version: | 0.3.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pysmartapp:all | piuparts-result: | successfully-tested 0.3.5-2 | Version: | 0.3.5-2 |
pysuez in trixie-rcmd |
Source: | pysuez | piuparts summary: | | Version: | 0.2.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pysuez:all | piuparts-result: | successfully-tested 0.2.0-2 | Version: | 0.2.0-2 |
pyswitchbee in trixie-rcmd |
Source: | pyswitchbee | piuparts summary: | | Version: | 1.8.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyswitchbee:all | piuparts-result: | successfully-tested 1.8.3-2 | Version: | 1.8.3-2 |
pyswitchbot in trixie-rcmd |
Source: | pyswitchbot | piuparts summary: | | Version: | 0.54.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyswitchbot:all | piuparts-result: | successfully-tested 0.54.0-1 | Version: | 0.54.0-1 |
pytedee-async in trixie-rcmd |
Source: | pytedee-async | piuparts summary: | | Version: | 0.2.20-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pytedee-async:all | piuparts-result: | successfully-tested 0.2.20-2 | Version: | 0.2.20-2 |
pytest-freezer in trixie-rcmd |
Source: | pytest-freezer | piuparts summary: | | Version: | 0.4.9-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pytest-freezer:all | piuparts-result: | successfully-tested 0.4.9-1 | Version: | 0.4.9-1 |
python-accuweather in trixie-rcmd |
Source: | python-accuweather | piuparts summary: | | Version: | 3.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-accuweather:all | piuparts-result: | successfully-tested 3.0.0-2 | Version: | 3.0.0-2 |
python-adax-local in trixie-rcmd |
Source: | python-adax-local | piuparts summary: | | Version: | 0.1.5-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-adax-local:all | piuparts-result: | successfully-tested 0.1.5-3 | Version: | 0.1.5-3 |
python-adb-shell in trixie-rcmd |
Source: | python-adb-shell | piuparts summary: | | Version: | 0.4.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-adb-shell:all | piuparts-result: | successfully-tested 0.4.4-2 | Version: | 0.4.4-2 |
python-adext in trixie-rcmd |
Source: | python-adext | piuparts summary: | | Version: | 0.4.3-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-adext:all | piuparts-result: | successfully-tested 0.4.3-3 | Version: | 0.4.3-3 |
python-adguardhome in trixie-rcmd |
Source: | python-adguardhome | piuparts summary: | | Version: | 0.7.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-adguardhome:all | piuparts-result: | successfully-tested 0.7.0-2 | Version: | 0.7.0-2 |
python-advantage-air in trixie-rcmd |
Source: | python-advantage-air | piuparts summary: | | Version: | 0.4.4-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org> |
Binary: | python3-advantage-air:all | piuparts-result: | successfully-tested 0.4.4-3 | Version: | 0.4.4-3 |
python-aemet-opendata in trixie-rcmd |
Source: | python-aemet-opendata | piuparts summary: | | Version: | 0.5.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aemet-opendata:all | piuparts-result: | successfully-tested 0.5.3-2 | Version: | 0.5.3-2 |
python-aenum in trixie-rcmd |
Source: | python-aenum | piuparts summary: | | Version: | 3.1.15-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aenum:all | piuparts-result: | successfully-tested 3.1.15-2 | Version: | 3.1.15-2 |
python-afsapi in trixie-rcmd |
Source: | python-afsapi | piuparts summary: | | Version: | 0.2.7-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-afsapi:all | piuparts-result: | successfully-tested 0.2.7-2 | Version: | 0.2.7-2 |
python-agent-py in trixie-rcmd |
Source: | python-agent-py | piuparts summary: | | Version: | 0.0.23-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-agent-py:all | piuparts-result: | successfully-tested 0.0.23-2 | Version: | 0.0.23-2 |
python-aio-geojson-client in trixie-rcmd |
Source: | python-aio-geojson-client | piuparts summary: | | Version: | 0.20-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aio-geojson-client:all | piuparts-result: | successfully-tested 0.20-2 | Version: | 0.20-2 |
python-aio-geojson-generic-client in trixie-rcmd |
Source: | python-aio-geojson-generic-client | piuparts summary: | | Version: | 0.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aio-geojson-generic-client:all | piuparts-result: | successfully-tested 0.4-2 | Version: | 0.4-2 |
python-aio-geojson-geonetnz-quakes in trixie-rcmd |
Source: | python-aio-geojson-geonetnz-quakes | piuparts summary: | | Version: | 0.16-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aio-geojson-geonetnz-quakes:all | piuparts-result: | successfully-tested 0.16-2 | Version: | 0.16-2 |
python-aio-geojson-geonetnz-volcano in trixie-rcmd |
Source: | python-aio-geojson-geonetnz-volcano | piuparts summary: | | Version: | 0.9-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aio-geojson-geonetnz-volcano:all | piuparts-result: | successfully-tested 0.9-2 | Version: | 0.9-2 |
python-aio-geojson-nsw-rfs-incidents in trixie-rcmd |
Source: | python-aio-geojson-nsw-rfs-incidents | piuparts summary: | | Version: | 0.7-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aio-geojson-nsw-rfs-incidents:all | piuparts-result: | successfully-tested 0.7-2 | Version: | 0.7-2 |
python-aio-geojson-usgs-earthquakes in trixie-rcmd |
Source: | python-aio-geojson-usgs-earthquakes | piuparts summary: | | Version: | 0.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aio-geojson-usgs-earthquakes:all | piuparts-result: | successfully-tested 0.3-2 | Version: | 0.3-2 |
Source: | python-aio-georss-client | piuparts summary: | | Version: | 0.12-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aio-georss-client:all | piuparts-result: | successfully-tested 0.12-2 | Version: | 0.12-2 |
Source: | python-aio-georss-gdacs | piuparts summary: | | Version: | 0.9+dfsg1-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aio-georss-gdacs:all | piuparts-result: | successfully-tested 0.9+dfsg1-1.1 | Version: | 0.9+dfsg1-1.1 |
python-aioairq in trixie-rcmd |
Source: | python-aioairq | piuparts summary: | | Version: | 0.4.2-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioairq:all | piuparts-result: | successfully-tested 0.4.2-3 | Version: | 0.4.2-3 |
python-aioairzone-cloud in trixie-rcmd |
Source: | python-aioairzone-cloud | piuparts summary: | | Version: | 0.6.1-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioairzone-cloud:all | piuparts-result: | successfully-tested 0.6.1-3 | Version: | 0.6.1-3 |
python-aioambient in trixie-rcmd |
Source: | python-aioambient | piuparts summary: | | Version: | 2024.1.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioambient:all | piuparts-result: | successfully-tested 2024.1.0-3 | Version: | 2024.1.0-3 |
python-aioasuswrt in trixie-rcmd |
Source: | python-aioasuswrt | piuparts summary: | | Version: | 1.4.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioasuswrt:all | piuparts-result: | successfully-tested 1.4.0-2 | Version: | 1.4.0-2 |
python-aioazuredevops in trixie-rcmd |
Source: | python-aioazuredevops | piuparts summary: | | Version: | 2.2.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioazuredevops:all | piuparts-result: | successfully-tested 2.2.0-2 | Version: | 2.2.0-2 |
python-aioeafm in trixie-rcmd |
Source: | python-aioeafm | piuparts summary: | | Version: | 1.0.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioeafm:all | piuparts-result: | successfully-tested 1.0.0-1.1 | Version: | 1.0.0-1.1 |
python-aioemonitor in trixie-rcmd |
Source: | python-aioemonitor | piuparts summary: | | Version: | 1.0.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioemonitor:all | piuparts-result: | successfully-tested 1.0.5-2 | Version: | 1.0.5-2 |
python-aioesphomeapi in trixie-rcmd |
Source: | python-aioesphomeapi | piuparts summary: | | Version: | 25.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioesphomeapi:all | piuparts-result: | successfully-tested 25.1.0-2 | Version: | 25.1.0-2 |
python-aioguardian in trixie-rcmd |
Source: | python-aioguardian | piuparts summary: | | Version: | 2023.12.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioguardian:all | piuparts-result: | successfully-tested 2023.12.0-3 | Version: | 2023.12.0-3 |
python-aioharmony in trixie-rcmd |
Source: | python-aioharmony | piuparts summary: | | Version: | 0.2.10-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioharmony:all | piuparts-result: | successfully-tested 0.2.10-2 | Version: | 0.2.10-2 |
python-aiohomekit in trixie-rcmd |
Source: | python-aiohomekit | piuparts summary: | | Version: | 3.2.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiohomekit:all | piuparts-result: | successfully-tested 3.2.1-2 | Version: | 3.2.1-2 |
python-aiohue in trixie-rcmd |
Source: | python-aiohue | piuparts summary: | | Version: | 4.7.2-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiohue:all | piuparts-result: | successfully-tested 4.7.2-3 | Version: | 4.7.2-3 |
python-aiolifx in trixie-rcmd |
Source: | python-aiolifx | piuparts summary: | | Version: | 1.0.6-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiolifx:all | piuparts-result: | successfully-tested 1.0.6-3 | Version: | 1.0.6-3 |
python-aiolifx-effects in trixie-rcmd |
Source: | python-aiolifx-effects | piuparts summary: | | Version: | 0.3.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiolifx-effects:all | piuparts-result: | successfully-tested 0.3.2-2 | Version: | 0.3.2-2 |
python-aiolifx-themes in trixie-rcmd |
Source: | python-aiolifx-themes | piuparts summary: | | Version: | 0.5.1-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiolifx-themes:all | piuparts-result: | successfully-tested 0.5.1-3 | Version: | 0.5.1-3 |
python-aiolivisi in trixie-rcmd |
Source: | python-aiolivisi | piuparts summary: | | Version: | 0.0.19-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiolivisi:all | piuparts-result: | successfully-tested 0.0.19-2 | Version: | 0.0.19-2 |
python-aiomusiccast in trixie-rcmd |
Source: | python-aiomusiccast | piuparts summary: | | Version: | 0.14.8-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiomusiccast:all | piuparts-result: | successfully-tested 0.14.8-2 | Version: | 0.14.8-2 |
python-aionanoleaf in trixie-rcmd |
Source: | python-aionanoleaf | piuparts summary: | | Version: | 0.2.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aionanoleaf:all | piuparts-result: | successfully-tested 0.2.1-2 | Version: | 0.2.1-2 |
python-aionut in trixie-rcmd |
Source: | python-aionut | piuparts summary: | | Version: | 4.3.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aionut:all | piuparts-result: | successfully-tested 4.3.3-2 | Version: | 4.3.3-2 |
python-aiooncue in trixie-rcmd |
Source: | python-aiooncue | piuparts summary: | | Version: | 0.3.7-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiooncue:all | piuparts-result: | successfully-tested 0.3.7-2 | Version: | 0.3.7-2 |
python-aioopenexchangerates in trixie-rcmd |
Source: | python-aioopenexchangerates | piuparts summary: | | Version: | 0.4.14-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioopenexchangerates:all | piuparts-result: | successfully-tested 0.4.14-2 | Version: | 0.4.14-2 |
python-aiopulse in trixie-rcmd |
Source: | python-aiopulse | piuparts summary: | | Version: | 0.4.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiopulse:all | piuparts-result: | successfully-tested 0.4.5-2 | Version: | 0.4.5-2 |
python-aiopvapi in trixie-rcmd |
Source: | python-aiopvapi | piuparts summary: | | Version: | 3.1.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiopvapi:all | piuparts-result: | successfully-tested 3.1.1-2 | Version: | 3.1.1-2 |
python-aiopvpc in trixie-rcmd |
Source: | python-aiopvpc | piuparts summary: | | Version: | 4.3.1-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiopvpc:all | piuparts-result: | successfully-tested 4.3.1-3 | Version: | 4.3.1-3 |
python-aiopyarr in trixie-rcmd |
Source: | python-aiopyarr | piuparts summary: | | Version: | 23.4.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiopyarr:all | piuparts-result: | successfully-tested 23.4.0-2 | Version: | 23.4.0-2 |
python-aioqsw in trixie-rcmd |
Source: | python-aioqsw | piuparts summary: | | Version: | 0.4.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioqsw:all | piuparts-result: | successfully-tested 0.4.1-2 | Version: | 0.4.1-2 |
python-aiorecollect in trixie-rcmd |
Source: | python-aiorecollect | piuparts summary: | | Version: | 2023.12.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiorecollect:all | piuparts-result: | successfully-tested 2023.12.0-2 | Version: | 2023.12.0-2 |
python-aioridwell in trixie-rcmd |
Source: | python-aioridwell | piuparts summary: | | Version: | 2024.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioridwell:all | piuparts-result: | successfully-tested 2024.1.0-2 | Version: | 2024.1.0-2 |
python-aioruckus in trixie-rcmd |
Source: | python-aioruckus | piuparts summary: | | Version: | 0.40-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioruckus:all | piuparts-result: | successfully-tested 0.40-2 | Version: | 0.40-2 |
python-aiosenz in trixie-rcmd |
Source: | python-aiosenz | piuparts summary: | | Version: | 1.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiosenz:all | piuparts-result: | successfully-tested 1.0.0-2 | Version: | 1.0.0-2 |
python-aioserial in trixie-rcmd |
Source: | python-aioserial | piuparts summary: | | Version: | 1.3.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-aioserial:all | piuparts-result: | successfully-tested 1.3.1-2 | Version: | 1.3.1-2 |
python-aioshelly in trixie-rcmd |
Source: | python-aioshelly | piuparts summary: | | Version: | 11.2.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioshelly:all | piuparts-result: | successfully-tested 11.2.0-3 | Version: | 11.2.0-3 |
python-aioskybell in trixie-rcmd |
Source: | python-aioskybell | piuparts summary: | | Version: | 23.12.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aioskybell:all | piuparts-result: | successfully-tested 23.12.0-2 | Version: | 23.12.0-2 |
python-aiosolaredge in trixie-rcmd |
Source: | python-aiosolaredge | piuparts summary: | | Version: | 0.2.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiosolaredge:all | piuparts-result: | successfully-tested 0.2.0-2 | Version: | 0.2.0-2 |
python-aiosomecomfort in trixie-rcmd |
Source: | python-aiosomecomfort | piuparts summary: | | Version: | 0.0.25-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiosomecomfort:all | piuparts-result: | successfully-tested 0.0.25-2 | Version: | 0.0.25-2 |
python-aiotractive in trixie-rcmd |
Source: | python-aiotractive | piuparts summary: | | Version: | 0.6.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiotractive:all | piuparts-result: | successfully-tested 0.6.0-2 | Version: | 0.6.0-2 |
python-aiounifi in trixie-rcmd |
Source: | python-aiounifi | piuparts summary: | | Version: | 79-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiounifi:all | piuparts-result: | successfully-tested 79-3 | Version: | 79-3 |
python-aiovlc in trixie-rcmd |
Source: | python-aiovlc | piuparts summary: | | Version: | 0.4.2-4 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, Edward Betts <edward@4angle.com>, |
Binary: | python3-aiovlc:all | piuparts-result: | successfully-tested 0.4.2-4 | Version: | 0.4.2-4 |
python-aiowaqi in trixie-rcmd |
Source: | python-aiowaqi | piuparts summary: | | Version: | 3.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aiowaqi:all | piuparts-result: | successfully-tested 3.1.0-2 | Version: | 3.1.0-2 |
python-airgradient in trixie-rcmd |
Source: | python-airgradient | piuparts summary: | | Version: | 0.9.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-airgradient:all | piuparts-result: | successfully-tested 0.9.1-1 | Version: | 0.9.1-1 |
python-airtouch4pyapi in trixie-rcmd |
Source: | python-airtouch4pyapi | piuparts summary: | | Version: | 1.0.8-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-airtouch4pyapi:all | piuparts-result: | successfully-tested 1.0.8-1.1 | Version: | 1.0.8-1.1 |
python-airtouch5py in trixie-rcmd |
Source: | python-airtouch5py | piuparts summary: | | Version: | 0.2.10-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-airtouch5py:all | piuparts-result: | successfully-tested 0.2.10-1.1 | Version: | 0.2.10-1.1 |
python-alarmdecoder in trixie-rcmd |
Source: | python-alarmdecoder | piuparts summary: | | Version: | 1.13.11-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-alarmdecoder:all | piuparts-result: | successfully-tested 1.13.11-2 | Version: | 1.13.11-2 |
python-amberelectric in trixie-rcmd |
Source: | python-amberelectric | piuparts summary: | | Version: | 2.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-amberelectric:all | piuparts-result: | successfully-tested 2.0.0-2 | Version: | 2.0.0-2 |
python-androidtv in trixie-rcmd |
Source: | python-androidtv | piuparts summary: | | Version: | 0.0.73-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-androidtv:all | piuparts-result: | successfully-tested 0.0.73-1.1 | Version: | 0.0.73-1.1 |
python-androidtvremote2 in trixie-rcmd |
Source: | python-androidtvremote2 | piuparts summary: | | Version: | 0.1.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-androidtvremote2:all | piuparts-result: | successfully-tested 0.1.1-2 | Version: | 0.1.1-2 |
python-anova-wifi in trixie-rcmd |
Source: | python-anova-wifi | piuparts summary: | | Version: | 0.17.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-anova-wifi:all | piuparts-result: | successfully-tested 0.17.1-2 | Version: | 0.17.1-2 |
python-anthemav in trixie-rcmd |
Source: | python-anthemav | piuparts summary: | | Version: | 1.4.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-anthemav:all | piuparts-result: | successfully-tested 1.4.2-2 | Version: | 1.4.2-2 |
python-apischema in trixie-rcmd |
Source: | python-apischema | piuparts summary: | | Version: | 0.18.3-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-apischema:all | piuparts-result: | successfully-tested 0.18.3-1 | Version: | 0.18.3-1 |
python-aprslib in trixie-rcmd |
Source: | python-aprslib | piuparts summary: | | Version: | 0.7.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aprslib:all | piuparts-result: | successfully-tested 0.7.2-2 | Version: | 0.7.2-2 |
python-apsystems-ez1 in trixie-rcmd |
Source: | python-apsystems-ez1 | piuparts summary: | | Version: | 2.3.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-apsystems-ez1:all | piuparts-result: | successfully-tested 2.3.0-2 | Version: | 2.3.0-2 |
python-aranet4 in trixie-rcmd |
Source: | python-aranet4 | piuparts summary: | | Version: | 2.4.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-aranet4:all | piuparts-result: | successfully-tested 2.4.0-2 | Version: | 2.4.0-2 |
python-arcam-fmj in trixie-rcmd |
Source: | python-arcam-fmj | piuparts summary: | | Version: | 1.5.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-arcam-fmj:all | piuparts-result: | successfully-tested 1.5.2-2 | Version: | 1.5.2-2 |
python-asyncarve in trixie-rcmd |
Source: | python-asyncarve | piuparts summary: | | Version: | 0.1.1-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-asyncarve:all | piuparts-result: | successfully-tested 0.1.1-1.1 | Version: | 0.1.1-1.1 |
python-asyncio-throttle in trixie-rcmd |
Source: | python-asyncio-throttle | piuparts summary: | | Version: | 1.0.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-asyncio-throttle:all | piuparts-result: | successfully-tested 1.0.2-2 | Version: | 1.0.2-2 |
python-asyncsleepiq in trixie-rcmd |
Source: | python-asyncsleepiq | piuparts summary: | | Version: | 1.5.3-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-asyncsleepiq:all | piuparts-result: | successfully-tested 1.5.3-1.1 | Version: | 1.5.3-1.1 |
python-auroranoaa in trixie-rcmd |
Source: | python-auroranoaa | piuparts summary: | | Version: | 0.0.5-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-auroranoaa:all | piuparts-result: | successfully-tested 0.0.5-1 | Version: | 0.0.5-1 |
python-awair in trixie-rcmd |
Source: | python-awair | piuparts summary: | | Version: | 0.2.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-python-awair:all | piuparts-result: | successfully-tested 0.2.4-2 | Version: | 0.2.4-2 |
python-bimmer-connected in trixie-rcmd |
Source: | python-bimmer-connected | piuparts summary: | | Version: | 0.16.3-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-bimmer-connected:all | piuparts-result: | successfully-tested 0.16.3-1.1 | Version: | 0.16.3-1.1 |
python-bleak-esphome in trixie-rcmd |
Source: | python-bleak-esphome | piuparts summary: | | Version: | 1.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-bleak-esphome:all | piuparts-result: | successfully-tested 1.0.0-2 | Version: | 1.0.0-2 |
python-bluecurrent-api in trixie-rcmd |
Source: | python-bluecurrent-api | piuparts summary: | | Version: | 1.2.3-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-bluecurrent-api:all | piuparts-result: | successfully-tested 1.2.3-1.1 | Version: | 1.2.3-1.1 |
python-bond-async in trixie-rcmd |
Source: | python-bond-async | piuparts summary: | | Version: | 0.2.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-bond-async:all | piuparts-result: | successfully-tested 0.2.1-2 | Version: | 0.2.1-2 |
python-boschshcpy in trixie-rcmd |
Source: | python-boschshcpy | piuparts summary: | | Version: | 0.2.92-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-boschshcpy:all | piuparts-result: | successfully-tested 0.2.92-2 | Version: | 0.2.92-2 |
python-bring-api in trixie-rcmd |
Source: | python-bring-api | piuparts summary: | | Version: | 0.9.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-bring-api:all | piuparts-result: | successfully-tested 0.9.0-2 | Version: | 0.9.0-2 |
python-bsblan in trixie-rcmd |
Source: | python-bsblan | piuparts summary: | | Version: | 1.2.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-bsblan:all | piuparts-result: | successfully-tested 1.2.1-1 | Version: | 1.2.1-1 |
python-chacha20poly1305 in trixie-rcmd |
Source: | python-chacha20poly1305 | piuparts summary: | | Version: | 0.0.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-chacha20poly1305:all | piuparts-result: | successfully-tested 0.0.3-2 | Version: | 0.0.3-2 |
python-chacha20poly1305-reuseable in trixie-rcmd |
Source: | python-chacha20poly1305-reuseable | piuparts summary: | | Version: | 0.13.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-chacha20poly1305-reuseable:all | piuparts-result: | successfully-tested 0.13.2-2 | Version: | 0.13.2-2 |
python-connio in trixie-rcmd |
Source: | python-connio | piuparts summary: | | Version: | 0.2.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-connio:all | piuparts-result: | successfully-tested 0.2.0-3 | Version: | 0.2.0-3 |
python-convertertools in trixie-rcmd |
Source: | python-convertertools | piuparts summary: | | Version: | 0.5.0+really0.5.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-convertertools | piuparts-result: | successfully-tested 0.5.0+really0.5.0-1 | Version: | 0.5.0+really0.5.0-1 |
python-crc in trixie-rcmd |
Source: | python-crc | piuparts summary: | | Version: | 7.1.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, Christopher Obbard <obbardc@debian.org>, |
Binary: | python3-crc:all | piuparts-result: | successfully-tested 7.1.0-1 | Version: | 7.1.0-1 |
python-crownstone-cloud in trixie-rcmd |
Source: | python-crownstone-cloud | piuparts summary: | | Version: | 1.4.11-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-crownstone-cloud:all | piuparts-result: | successfully-tested 1.4.11-2 | Version: | 1.4.11-2 |
python-devialet in trixie-rcmd |
Source: | python-devialet | piuparts summary: | | Version: | 1.4.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-devialet:all | piuparts-result: | successfully-tested 1.4.5-2 | Version: | 1.4.5-2 |
python-dicttoxml2 in trixie-rcmd |
Source: | python-dicttoxml2 | piuparts summary: | | Version: | 2.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-dicttoxml2:all | piuparts-result: | successfully-tested 2.1.0-2 | Version: | 2.1.0-2 |
python-dropmqttapi in trixie-rcmd |
Source: | python-dropmqttapi | piuparts summary: | | Version: | 1.0.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-dropmqttapi:all | piuparts-result: | successfully-tested 1.0.3-2 | Version: | 1.0.3-2 |
python-ecobee-api in trixie-rcmd |
Source: | python-ecobee-api | piuparts summary: | | Version: | 0.2.20-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-ecobee-api:all | piuparts-result: | successfully-tested 0.2.20-1 | Version: | 0.2.20-1 |
python-elgato in trixie-rcmd |
Source: | python-elgato | piuparts summary: | | Version: | 5.1.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-elgato:all | piuparts-result: | successfully-tested 5.1.2-2 | Version: | 5.1.2-2 |
python-elmax-api in trixie-rcmd |
Source: | python-elmax-api | piuparts summary: | | Version: | 0.0.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-elmax-api:all | piuparts-result: | successfully-tested 0.0.5-2 | Version: | 0.0.5-2 |
python-energyzero in trixie-rcmd |
Source: | python-energyzero | piuparts summary: | | Version: | 2.1.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-energyzero:all | piuparts-result: | successfully-tested 2.1.1-2 | Version: | 2.1.1-2 |
python-enocean in trixie-rcmd |
Source: | python-enocean | piuparts summary: | | Version: | 0.60.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-enocean:all | piuparts-result: | successfully-tested 0.60.1-2 | Version: | 0.60.1-2 |
python-envoy-utils in trixie-rcmd |
Source: | python-envoy-utils | piuparts summary: | | Version: | 0.0.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-envoy-utils:all | piuparts-result: | successfully-tested 0.0.1-2 | Version: | 0.0.1-2 |
python-fnv-hash-fast in trixie-rcmd |
Source: | python-fnv-hash-fast | piuparts summary: | | Version: | 0.5.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-fnv-hash-fast:all | piuparts-result: | successfully-tested 0.5.0-2 | Version: | 0.5.0-2 |
python-fnvhash in trixie-rcmd |
Source: | python-fnvhash | piuparts summary: | | Version: | 0.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-fnvhash:all | piuparts-result: | successfully-tested 0.1.0-2 | Version: | 0.1.0-2 |
python-foobot-async in trixie-rcmd |
Source: | python-foobot-async | piuparts summary: | | Version: | 1.0.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-foobot-async:all | piuparts-result: | successfully-tested 1.0.1-2 | Version: | 1.0.1-2 |
python-foscam in trixie-rcmd |
Source: | python-foscam | piuparts summary: | | Version: | 1.2.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-foscam:all | piuparts-result: | successfully-tested 1.2.2-2 | Version: | 1.2.2-2 |
python-freebox-api in trixie-rcmd |
Source: | python-freebox-api | piuparts summary: | | Version: | 1.1.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-freebox-api:all | piuparts-result: | successfully-tested 1.1.0-1.1 | Version: | 1.1.0-1.1 |
python-gardena-bluetooth in trixie-rcmd |
Source: | python-gardena-bluetooth | piuparts summary: | | Version: | 1.4.3-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-gardena-bluetooth:all | piuparts-result: | successfully-tested 1.4.3-1.1 | Version: | 1.4.3-1.1 |
Source: | python-georss-client | piuparts summary: | | Version: | 0.18-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-georss-client:all | piuparts-result: | successfully-tested 0.18-1 | Version: | 0.18-1 |
python-gios in trixie-rcmd |
Source: | python-gios | piuparts summary: | | Version: | 5.0.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-gios:all | piuparts-result: | successfully-tested 5.0.0-1 | Version: | 5.0.0-1 |
python-glances-api in trixie-rcmd |
Source: | python-glances-api | piuparts summary: | | Version: | 0.9.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-glances-api:all | piuparts-result: | successfully-tested 0.9.0-1 | Version: | 0.9.0-1 |
python-goodwe in trixie-rcmd |
Source: | python-goodwe | piuparts summary: | | Version: | 0.4.8-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-goodwe:all | piuparts-result: | successfully-tested 0.4.8-2 | Version: | 0.4.8-2 |
python-googlemaps in trixie-rcmd |
Source: | python-googlemaps | piuparts summary: | | Version: | 4.10.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Dong Xu <me@eipi.fun> |
Binary: | python3-googlemaps:all | piuparts-result: | successfully-tested 4.10.0-2 | Version: | 4.10.0-2 |
python-gql in trixie-rcmd |
Source: | python-gql | piuparts summary: | | Version: | 3.6.0~b2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-gql:all | piuparts-result: | successfully-tested 3.6.0~b2-1 | Version: | 3.6.0~b2-1 |
python-gridnet in trixie-rcmd |
Source: | python-gridnet | piuparts summary: | | Version: | 5.0.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-gridnet:all | piuparts-result: | successfully-tested 5.0.1-2 | Version: | 5.0.1-2 |
python-gspread in trixie-rcmd |
Source: | python-gspread | piuparts summary: | | Version: | 6.1.4-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Tianyu Chen <billchenchina2001@gmail.com>, |
Binary: | python3-gspread:all | piuparts-result: | successfully-tested 6.1.4-1.1 | Version: | 6.1.4-1.1 |
python-hole in trixie-rcmd |
Source: | python-hole | piuparts summary: | | Version: | 0.8.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-hole:all | piuparts-result: | successfully-tested 0.8.0-2 | Version: | 0.8.0-2 |
python-homeconnect in trixie-rcmd |
Source: | python-homeconnect | piuparts summary: | | Version: | 0.8.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-homeconnect:all | piuparts-result: | successfully-tested 0.8.0-1.1 | Version: | 0.8.0-1.1 |
python-homewizard-energy in trixie-rcmd |
Source: | python-homewizard-energy | piuparts summary: | | Version: | 7.0.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-homewizard-energy:all | piuparts-result: | successfully-tested 7.0.0-1 | Version: | 7.0.0-1 |
python-http-ece in trixie-rcmd |
Source: | python-http-ece | piuparts summary: | | Version: | 1.2.1-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Tianyu Chen <billchenchina2001@gmail.com>, Thomas Goirand <zigo@debian.org>, |
Binary: | python3-http-ece:all | piuparts-result: | successfully-tested 1.2.1-3 | Version: | 1.2.1-3 |
python-humps in trixie-rcmd |
Source: | python-humps | piuparts summary: | | Version: | 0.2.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-humps:all | piuparts-result: | successfully-tested 0.2.2-2 | Version: | 0.2.2-2 |
python-hyperion-py in trixie-rcmd |
Source: | python-hyperion-py | piuparts summary: | | Version: | 0.7.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-hyperion-py:all | piuparts-result: | successfully-tested 0.7.5-2 | Version: | 0.7.5-2 |
python-ibeacon-ble in trixie-rcmd |
Source: | python-ibeacon-ble | piuparts summary: | | Version: | 1.2.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-ibeacon-ble:all | piuparts-result: | successfully-tested 1.2.0-2 | Version: | 1.2.0-2 |
python-idasen in trixie-rcmd |
Source: | python-idasen | piuparts summary: | | Version: | 0.12.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-idasen:all | piuparts-result: | successfully-tested 0.12.0-2 | Version: | 0.12.0-2 |
python-idasen-ha in trixie-rcmd |
Source: | python-idasen-ha | piuparts summary: | | Version: | 2.6.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-idasen-ha:all | piuparts-result: | successfully-tested 2.6.2-2 | Version: | 2.6.2-2 |
python-incomfort-client in trixie-rcmd |
Source: | python-incomfort-client | piuparts summary: | | Version: | 0.6.3.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-incomfort-client:all | piuparts-result: | successfully-tested 0.6.3.1-2 | Version: | 0.6.3.1-2 |
python-inquirerpy in trixie-rcmd |
Source: | python-inquirerpy | piuparts summary: | | Version: | 0.3.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-inquirerpy:all | piuparts-result: | successfully-tested 0.3.4-2 | Version: | 0.3.4-2 |
python-intellifire4py in trixie-rcmd |
Source: | python-intellifire4py | piuparts summary: | | Version: | 4.1.9-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-intellifire4py:all | piuparts-result: | successfully-tested 4.1.9-2 | Version: | 4.1.9-2 |
python-jsonrpc-base in trixie-rcmd |
Source: | python-jsonrpc-base | piuparts summary: | | Version: | 2.2.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-jsonrpc-base:all | piuparts-result: | successfully-tested 2.2.0-2 | Version: | 2.2.0-2 |
python-justnimbus in trixie-rcmd |
Source: | python-justnimbus | piuparts summary: | | Version: | 0.7.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-justnimbus:all | piuparts-result: | successfully-tested 0.7.4-2 | Version: | 0.7.4-2 |
python-luftdaten in trixie-rcmd |
Source: | python-luftdaten | piuparts summary: | | Version: | 0.7.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-luftdaten:all | piuparts-result: | successfully-tested 0.7.4-2 | Version: | 0.7.4-2 |
python-mill-local in trixie-rcmd |
Source: | python-mill-local | piuparts summary: | | Version: | 0.3.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-mill-local:all | piuparts-result: | successfully-tested 0.3.0-2 | Version: | 0.3.0-2 |
python-moehlenhoff-alpha2 in trixie-rcmd |
Source: | python-moehlenhoff-alpha2 | piuparts summary: | | Version: | 1.3.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-moehlenhoff-alpha2:all | piuparts-result: | successfully-tested 1.3.1-2 | Version: | 1.3.1-2 |
python-motionmount in trixie-rcmd |
Source: | python-motionmount | piuparts summary: | | Version: | 2.2.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-motionmount:all | piuparts-result: | successfully-tested 2.2.0-1 | Version: | 2.2.0-1 |
python-ms-cv in trixie-rcmd |
Source: | python-ms-cv | piuparts summary: | | Version: | 0.1.1-4 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Tianyu Chen <billchenchina2001@gmail.com>, Thomas Goirand <zigo@debian.org>, |
Binary: | python3-ms-cv:all | piuparts-result: | successfully-tested 0.1.1-4 | Version: | 0.1.1-4 |
python-mullvad-api in trixie-rcmd |
Source: | python-mullvad-api | piuparts summary: | | Version: | 1.0.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Tianyu Chen <billchenchina2001@gmail.com> |
Binary: | python3-mullvad-api:all | piuparts-result: | successfully-tested 1.0.0-1.1 | Version: | 1.0.0-1.1 |
python-mutesync in trixie-rcmd |
Source: | python-mutesync | piuparts summary: | | Version: | 0.0.2-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Tianyu Chen <billchenchina2001@gmail.com> |
Binary: | python3-mutesync:all | piuparts-result: | successfully-tested 0.0.2-1.1 | Version: | 0.0.2-1.1 |
python-mystrom in trixie-rcmd |
Source: | python-mystrom | piuparts summary: | | Version: | 2.2.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-python-mystrom:all | piuparts-result: | successfully-tested 2.2.0-2 | Version: | 2.2.0-2 |
python-myuplink in trixie-rcmd |
Source: | python-myuplink | piuparts summary: | | Version: | 0.6.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Tianyu Chen <billchenchina2001@gmail.com> |
Binary: | python3-myuplink:all | piuparts-result: | successfully-tested 0.6.0-1.1 | Version: | 0.6.0-1.1 |
python-noiseprotocol in trixie-rcmd |
Source: | python-noiseprotocol | piuparts summary: | | Version: | 0.3.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-noiseprotocol:all | piuparts-result: | successfully-tested 0.3.1-2 | Version: | 0.3.1-2 |
python-nuheat in trixie-rcmd |
Source: | python-nuheat | piuparts summary: | | Version: | 1.0.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-nuheat:all | piuparts-result: | successfully-tested 1.0.1-2 | Version: | 1.0.1-2 |
python-odp-amsterdam in trixie-rcmd |
Source: | python-odp-amsterdam | piuparts summary: | | Version: | 6.0.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-odp-amsterdam:all | piuparts-result: | successfully-tested 6.0.2-2 | Version: | 6.0.2-2 |
python-ondilo in trixie-rcmd |
Source: | python-ondilo | piuparts summary: | | Version: | 0.5.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-ondilo:all | piuparts-result: | successfully-tested 0.5.0-1.1 | Version: | 0.5.0-1.1 |
python-opendata-transport in trixie-rcmd |
Source: | python-opendata-transport | piuparts summary: | | Version: | 0.5.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-opendata-transport:all | piuparts-result: | successfully-tested 0.5.0-1 | Version: | 0.5.0-1 |
python-openerz-api in trixie-rcmd |
Source: | python-openerz-api | piuparts summary: | | Version: | 0.3.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-openerz-api:all | piuparts-result: | successfully-tested 0.3.0-2 | Version: | 0.3.0-2 |
python-opuslib in trixie-rcmd |
Source: | python-opuslib | piuparts summary: | | Version: | 3.0.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-opuslib:all | piuparts-result: | successfully-tested 3.0.1-2 | Version: | 3.0.1-2 |
python-ovoenergy in trixie-rcmd |
Source: | python-ovoenergy | piuparts summary: | | Version: | 2.0.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-ovoenergy:all | piuparts-result: | successfully-tested 2.0.0-2 | Version: | 2.0.0-2 |
python-p1monitor in trixie-rcmd |
Source: | python-p1monitor | piuparts summary: | | Version: | 3.1.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-p1monitor:all | piuparts-result: | successfully-tested 3.1.0-1 | Version: | 3.1.0-1 |
python-peco in trixie-rcmd |
Source: | python-peco | piuparts summary: | | Version: | 0.1.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-peco:all | piuparts-result: | successfully-tested 0.1.1-2 | Version: | 0.1.1-2 |
python-phone-modem in trixie-rcmd |
Source: | python-phone-modem | piuparts summary: | | Version: | 0.1.2-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-phone-modem:all | piuparts-result: | successfully-tested 0.1.2-3 | Version: | 0.1.2-3 |
python-picnic-api in trixie-rcmd |
Source: | python-picnic-api | piuparts summary: | | Version: | 1.1.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-picnic-api:all | piuparts-result: | successfully-tested 1.1.0-1.1 | Version: | 1.1.0-1.1 |
python-pkce in trixie-rcmd |
Source: | python-pkce | piuparts summary: | | Version: | 1.0.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pkce:all | piuparts-result: | successfully-tested 1.0.3-2 | Version: | 1.0.3-2 |
python-plugwise in trixie-rcmd |
Source: | python-plugwise | piuparts summary: | | Version: | 1.6.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-plugwise:all | piuparts-result: | successfully-tested 1.6.2-1 | Version: | 1.6.2-1 |
python-psutil-home-assistant in trixie-rcmd |
Source: | python-psutil-home-assistant | piuparts summary: | | Version: | 0.0.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-psutil-home-assistant:all | piuparts-result: | successfully-tested 0.0.1-2 | Version: | 0.0.1-2 |
python-pure-pcapy3 in trixie-rcmd |
Source: | python-pure-pcapy3 | piuparts summary: | | Version: | 1.0.1-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-pure-pcapy3:all | piuparts-result: | successfully-tested 1.0.1-1.1 | Version: | 1.0.1-1.1 |
python-pure-python-adb in trixie-rcmd |
Source: | python-pure-python-adb | piuparts summary: | | Version: | 0.3.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-ppadb:all | piuparts-result: | successfully-tested 0.3.0-3 | Version: | 0.3.0-3 |
python-pyflume in trixie-rcmd |
Source: | python-pyflume | piuparts summary: | | Version: | 0.8.7-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Ananthu C V <weepingclown@disroot.org> |
Binary: | python3-pyflume:all | piuparts-result: | successfully-tested 0.8.7-2 | Version: | 0.8.7-2 |
python-pynetgear in trixie-rcmd |
Source: | python-pynetgear | piuparts summary: | | Version: | 0.10.10-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-pynetgear:all | piuparts-result: | successfully-tested 0.10.10-1.1 | Version: | 0.10.10-1.1 |
python-pytest-freezegun in trixie-rcmd |
Source: | python-pytest-freezegun | piuparts summary: | | Version: | 0.4.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-pytest-freezegun:all | piuparts-result: | successfully-tested 0.4.2-2 | Version: | 0.4.2-2 |
python-rabbitair in trixie-rcmd |
Source: | python-rabbitair | piuparts summary: | | Version: | 0.0.8-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-rabbitair:all | piuparts-result: | successfully-tested 0.0.8-3 | Version: | 0.0.8-3 |
python-radios in trixie-rcmd |
Source: | python-radios | piuparts summary: | | Version: | 0.3.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-radios:all | piuparts-result: | successfully-tested 0.3.2-1 | Version: | 0.3.2-1 |
python-renault-api in trixie-rcmd |
Source: | python-renault-api | piuparts summary: | | Version: | 0.2.7-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-renault-api:all | piuparts-result: | successfully-tested 0.2.7-1 | Version: | 0.2.7-1 |
python-roborock in trixie-rcmd |
Source: | python-roborock | piuparts summary: | | Version: | 2.8.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-roborock:all | piuparts-result: | successfully-tested 2.8.0-1 | Version: | 2.8.0-1 |
python-rokuecp in trixie-rcmd |
Source: | python-rokuecp | piuparts summary: | | Version: | 0.19.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-rokuecp:all | piuparts-result: | successfully-tested 0.19.4-2 | Version: | 0.19.4-2 |
python-romy in trixie-rcmd |
Source: | python-romy | piuparts summary: | | Version: | 0.0.10-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-romy:all | piuparts-result: | successfully-tested 0.0.10-2 | Version: | 0.0.10-2 |
python-rxv in trixie-rcmd |
Source: | python-rxv | piuparts summary: | | Version: | 0.7.0-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-rxv:all | piuparts-result: | successfully-tested 0.7.0-1.1 | Version: | 0.7.0-1.1 |
python-samsungctl in trixie-rcmd |
Source: | python-samsungctl | piuparts summary: | | Version: | 0.7.1-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-samsungctl:all | piuparts-result: | successfully-tested 0.7.1-1.1 | Version: | 0.7.1-1.1 |
python-sanix in trixie-rcmd |
Source: | python-sanix | piuparts summary: | | Version: | 1.0.6-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-sanix:all | piuparts-result: | successfully-tested 1.0.6-1.1 | Version: | 1.0.6-1.1 |
python-sharkiq in trixie-rcmd |
Source: | python-sharkiq | piuparts summary: | | Version: | 1.0.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-sharkiq:all | piuparts-result: | successfully-tested 1.0.2-2 | Version: | 1.0.2-2 |
python-simplehound in trixie-rcmd |
Source: | python-simplehound | piuparts summary: | | Version: | 0.6-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-simplehound:all | piuparts-result: | successfully-tested 0.6-2 | Version: | 0.6-2 |
python-simplepush in trixie-rcmd |
Source: | python-simplepush | piuparts summary: | | Version: | 2.2.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Ananthu C V <weepingclown@disroot.org> |
Binary: | python3-simplepush:all | piuparts-result: | successfully-tested 2.2.3-2 | Version: | 2.2.3-2 |
python-snapcast in trixie-rcmd |
Source: | python-snapcast | piuparts summary: | | Version: | 2.3.6-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-snapcast:all | piuparts-result: | successfully-tested 2.3.6-2 | Version: | 2.3.6-2 |
python-songpal in trixie-rcmd |
Source: | python-songpal | piuparts summary: | | Version: | 0.16.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-songpal:all | piuparts-result: | successfully-tested 0.16.2-2 | Version: | 0.16.2-2 |
python-starline in trixie-rcmd |
Source: | python-starline | piuparts summary: | | Version: | 0.1.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-starline:all | piuparts-result: | successfully-tested 0.1.5-2 | Version: | 0.1.5-2 |
python-tado in trixie-rcmd |
Source: | python-tado | piuparts summary: | | Version: | 0.17.7-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-tado:all | piuparts-result: | successfully-tested 0.17.7-2 | Version: | 0.17.7-2 |
python-tailscale in trixie-rcmd |
Source: | python-tailscale | piuparts summary: | | Version: | 0.6.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-tailscale:all | piuparts-result: | successfully-tested 0.6.1-2 | Version: | 0.6.1-2 |
python-technove in trixie-rcmd |
Source: | python-technove | piuparts summary: | | Version: | 1.3.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-technove:all | piuparts-result: | successfully-tested 1.3.1-2 | Version: | 1.3.1-2 |
python-titlecase in trixie-rcmd |
Source: | python-titlecase | piuparts summary: | | Version: | 2.4.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-titlecase:all | piuparts-result: | successfully-tested 2.4.1-2 | Version: | 2.4.1-2 |
python-toonapi in trixie-rcmd |
Source: | python-toonapi | piuparts summary: | | Version: | 0.3.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-toonapi:all | piuparts-result: | successfully-tested 0.3.0-2 | Version: | 0.3.0-2 |
python-ttls in trixie-rcmd |
Source: | python-ttls | piuparts summary: | | Version: | 1.9.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-ttls:all | piuparts-result: | successfully-tested 1.9.0-1 | Version: | 1.9.0-1 |
python-twentemilieu in trixie-rcmd |
Source: | python-twentemilieu | piuparts summary: | | Version: | 2.1.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-twentemilieu:all | piuparts-result: | successfully-tested 2.1.0-1 | Version: | 2.1.0-1 |
python-uiprotect in trixie-rcmd |
Source: | python-uiprotect | piuparts summary: | | Version: | 6.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Ananthu C V <weepingclown@disroot.org> |
Binary: | python-uiprotect-doc:all | piuparts-result: | successfully-tested 6.1.0-2 | Version: | 6.1.0-2 |
Binary: | python3-uiprotect:all | piuparts-result: | successfully-tested 6.1.0-2 | Version: | 6.1.0-2 |
python-umodbus in trixie-rcmd |
Source: | python-umodbus | piuparts summary: | | Version: | 1.0.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-umodbus:all | piuparts-result: | successfully-tested 1.0.4-2 | Version: | 1.0.4-2 |
python-vehicle in trixie-rcmd |
Source: | python-vehicle | piuparts summary: | | Version: | 2.2.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-vehicle:all | piuparts-result: | successfully-tested 2.2.2-2 | Version: | 2.2.2-2 |
python-voip-utils in trixie-rcmd |
Source: | python-voip-utils | piuparts summary: | | Version: | 0.2.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-voip-utils:all | piuparts-result: | successfully-tested 0.2.1-2 | Version: | 0.2.1-2 |
python-vsure in trixie-rcmd |
Source: | python-vsure | piuparts summary: | | Version: | 2.6.7-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Thomas Goirand <zigo@debian.org>, |
Binary: | python3-vsure:all | piuparts-result: | successfully-tested 2.6.7-2 | Version: | 2.6.7-2 |
python-vultr in trixie-rcmd |
Source: | python-vultr | piuparts summary: | | Version: | 1.0.1-4 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Tianyu Chen <billchenchina2001@gmail.com>, Thomas Goirand <zigo@debian.org>, |
Binary: | python3-vultr:all | piuparts-result: | successfully-tested 1.0.1-4 | Version: | 1.0.1-4 |
python-wiffi in trixie-rcmd |
Source: | python-wiffi | piuparts summary: | | Version: | 1.1.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-wiffi:all | piuparts-result: | successfully-tested 1.1.2-2 | Version: | 1.1.2-2 |
python-wolf-comm in trixie-rcmd |
Source: | python-wolf-comm | piuparts summary: | | Version: | 0.0.19-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-wolf-comm:all | piuparts-result: | successfully-tested 0.0.19-1 | Version: | 0.0.19-1 |
python-xiaomi-ble in trixie-rcmd |
Source: | python-xiaomi-ble | piuparts summary: | | Version: | 0.30.2-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Tianyu Chen <billchenchina2001@gmail.com>, Thomas Goirand <zigo@debian.org>, |
Binary: | python3-xiaomi-ble:all | piuparts-result: | successfully-tested 0.30.2-3 | Version: | 0.30.2-3 |
python-yalexs in trixie-rcmd |
Source: | python-yalexs | piuparts summary: | | Version: | 8.6.4-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-yalexs:all | piuparts-result: | successfully-tested 8.6.4-1 | Version: | 8.6.4-1 |
python-yolink-api in trixie-rcmd |
Source: | python-yolink-api | piuparts summary: | | Version: | 0.4.7-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-yolink-api:all | piuparts-result: | successfully-tested 0.4.7-1 | Version: | 0.4.7-1 |
python-youless-api in trixie-rcmd |
Source: | python-youless-api | piuparts summary: | | Version: | 2.1.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-youless-api:all | piuparts-result: | successfully-tested 2.1.2-2 | Version: | 2.1.2-2 |
python-youtubeaio in trixie-rcmd |
Source: | python-youtubeaio | piuparts summary: | | Version: | 1.1.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-youtubeaio:all | piuparts-result: | successfully-tested 1.1.5-2 | Version: | 1.1.5-2 |
pytile in trixie-rcmd |
Source: | pytile | piuparts summary: | | Version: | 2023.12.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pytile:all | piuparts-result: | successfully-tested 2023.12.0-2 | Version: | 2023.12.0-2 |
pytrafikverket in trixie-rcmd |
Source: | pytrafikverket | piuparts summary: | | Version: | 1.1.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pytrafikverket:all | piuparts-result: | successfully-tested 1.1.1-1 | Version: | 1.1.1-1 |
pytrydan in trixie-rcmd |
Source: | pytrydan | piuparts summary: | | Version: | 0.8.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pytrydan:all | piuparts-result: | successfully-tested 0.8.1-2 | Version: | 0.8.1-2 |
pyvesync in trixie-rcmd |
Source: | pyvesync | piuparts summary: | | Version: | 2.1.12-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-pyvesync:all | piuparts-result: | successfully-tested 2.1.12-2 | Version: | 2.1.12-2 |
pyvicare in trixie-rcmd |
Source: | pyvicare | piuparts summary: | | Version: | 2.37.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyvicare:all | piuparts-result: | successfully-tested 2.37.0-1 | Version: | 2.37.0-1 |
pyvlx in trixie-rcmd |
Source: | pyvlx | piuparts summary: | | Version: | 0.2.25-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyvlx:all | piuparts-result: | successfully-tested 0.2.25-1 | Version: | 0.2.25-1 |
pyvolumio in trixie-rcmd |
Source: | pyvolumio | piuparts summary: | | Version: | 0.1.5-1.1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyvolumio:all | piuparts-result: | successfully-tested 0.1.5-1.1 | Version: | 0.1.5-1.1 |
pyws66i in trixie-rcmd |
Source: | pyws66i | piuparts summary: | | Version: | 1.1-4 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyws66i:all | piuparts-result: | successfully-tested 1.1-4 | Version: | 1.1-4 |
pyxiaomigateway in trixie-rcmd |
Source: | pyxiaomigateway | piuparts summary: | | Version: | 0.14.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-pyxiaomigateway:all | piuparts-result: | successfully-tested 0.14.3-2 | Version: | 0.14.3-2 |
qingping-ble in trixie-rcmd |
Source: | qingping-ble | piuparts summary: | | Version: | 0.10.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-qingping-ble:all | piuparts-result: | successfully-tested 0.10.0-2 | Version: | 0.10.0-2 |
rachiopy in trixie-rcmd |
Source: | rachiopy | piuparts summary: | | Version: | 1.1.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-rachiopy:all | piuparts-result: | successfully-tested 1.1.0-3 | Version: | 1.1.0-3 |
radiotherm in trixie-rcmd |
Source: | radiotherm | piuparts summary: | | Version: | 2.1.0-3 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-radiotherm:all | piuparts-result: | successfully-tested 2.1.0-3 | Version: | 2.1.0-3 |
rapt-ble in trixie-rcmd |
Source: | rapt-ble | piuparts summary: | | Version: | 0.1.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-rapt-ble:all | piuparts-result: | successfully-tested 0.1.2-2 | Version: | 0.1.2-2 |
regenmaschine in trixie-rcmd |
Source: | regenmaschine | piuparts summary: | | Version: | 2024.3.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-regenmaschine:all | piuparts-result: | successfully-tested 2024.3.0-2 | Version: | 2024.3.0-2 |
renson-endura-delta in trixie-rcmd |
Source: | renson-endura-delta | piuparts summary: | | Version: | 1.7.2-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-renson-endura-delta:all | piuparts-result: | successfully-tested 1.7.2-1 | Version: | 1.7.2-1 |
rpi-bad-power in trixie-rcmd |
Source: | rpi-bad-power | piuparts summary: | | Version: | 0.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-rpi-bad-power:all | piuparts-result: | successfully-tested 0.1.0-2 | Version: | 0.1.0-2 |
rtsp-to-webrtc in trixie-rcmd |
Source: | rtsp-to-webrtc | piuparts summary: | | Version: | 0.6.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-rtsp-to-webrtc:all | piuparts-result: | successfully-tested 0.6.1-2 | Version: | 0.6.1-2 |
ruuvitag-ble in trixie-rcmd |
Source: | ruuvitag-ble | piuparts summary: | | Version: | 0.1.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-ruuvitag-ble:all | piuparts-result: | successfully-tested 0.1.2-2 | Version: | 0.1.2-2 |
sensorpro-ble in trixie-rcmd |
Source: | sensorpro-ble | piuparts summary: | | Version: | 0.5.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-sensorpro-ble:all | piuparts-result: | successfully-tested 0.5.3-2 | Version: | 0.5.3-2 |
sensorpush-ble in trixie-rcmd |
Source: | sensorpush-ble | piuparts summary: | | Version: | 1.7.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-sensorpush-ble:all | piuparts-result: | successfully-tested 1.7.1-1 | Version: | 1.7.1-1 |
simplisafe-python in trixie-rcmd |
Source: | simplisafe-python | piuparts summary: | | Version: | 2024.1.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-simplisafe:all | piuparts-result: | successfully-tested 2024.1.0-2 | Version: | 2024.1.0-2 |
smart-meter-texas in trixie-rcmd |
Source: | smart-meter-texas | piuparts summary: | | Version: | 0.5.5-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-smart-meter-texas:all | piuparts-result: | successfully-tested 0.5.5-2 | Version: | 0.5.5-2 |
somfy-mylink-synergy in trixie-rcmd |
Source: | somfy-mylink-synergy | piuparts summary: | | Version: | 1.0.6-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-somfy-mylink-synergy:all | piuparts-result: | successfully-tested 1.0.6-2 | Version: | 1.0.6-2 |
sonos-websocket in trixie-rcmd |
Source: | sonos-websocket | piuparts summary: | | Version: | 0.1.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-sonos-websocket:all | piuparts-result: | successfully-tested 0.1.3-2 | Version: | 0.1.3-2 |
spotipy in trixie-rcmd |
Source: | spotipy | piuparts summary: | | Version: | 2.24.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-spotipy:all | piuparts-result: | successfully-tested 2.24.0-2 | Version: | 2.24.0-2 |
stdio-mgr in trixie-rcmd |
Source: | stdio-mgr | piuparts summary: | | Version: | 1.0.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-stdio-mgr:all | piuparts-result: | successfully-tested 1.0.1-2 | Version: | 1.0.1-2 |
stookalert in trixie-rcmd |
Source: | stookalert | piuparts summary: | | Version: | 0.1.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-stookalert:all | piuparts-result: | successfully-tested 0.1.4-2 | Version: | 0.1.4-2 |
stookwijzer in trixie-rcmd |
Source: | stookwijzer | piuparts summary: | | Version: | 1.5.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-stookwijzer:all | piuparts-result: | successfully-tested 1.5.1-1 | Version: | 1.5.1-1 |
striprtf in trixie-rcmd |
Source: | striprtf | piuparts summary: | | Version: | 0.0.28-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-striprtf:all | piuparts-result: | successfully-tested 0.0.28-1 | Version: | 0.0.28-1 |
sunweg in trixie-rcmd |
Source: | sunweg | piuparts summary: | | Version: | 3.1.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-sunweg:all | piuparts-result: | successfully-tested 3.1.0-1 | Version: | 3.1.0-1 |
surepy in trixie-rcmd |
Source: | surepy | piuparts summary: | | Version: | 0.9.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-surepy:all | piuparts-result: | successfully-tested 0.9.0-2 | Version: | 0.9.0-2 |
switchbot-api in trixie-rcmd |
Source: | switchbot-api | piuparts summary: | | Version: | 2.2.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-switchbot-api:all | piuparts-result: | successfully-tested 2.2.1-2 | Version: | 2.2.1-2 |
systembridgemodels in trixie-rcmd |
Source: | systembridgemodels | piuparts summary: | | Version: | 4.2.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-systembridgemodels:all | piuparts-result: | successfully-tested 4.2.4-2 | Version: | 4.2.4-2 |
tesla-powerwall in trixie-rcmd |
Source: | tesla-powerwall | piuparts summary: | | Version: | 0.5.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-tesla-powerwall:all | piuparts-result: | successfully-tested 0.5.2-2 | Version: | 0.5.2-2 |
tesla-wall-connector in trixie-rcmd |
Source: | tesla-wall-connector | piuparts summary: | | Version: | 1.0.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-tesla-wall-connector:all | piuparts-result: | successfully-tested 1.0.2-2 | Version: | 1.0.2-2 |
tessie-api in trixie-rcmd |
Source: | tessie-api | piuparts summary: | | Version: | 0.1.1-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-tessie-api:all | piuparts-result: | successfully-tested 0.1.1-2 | Version: | 0.1.1-2 |
thermopro-ble in trixie-rcmd |
Source: | thermopro-ble | piuparts summary: | | Version: | 0.10.0-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-thermopro-ble:all | piuparts-result: | successfully-tested 0.10.0-2 | Version: | 0.10.0-2 |
tilt-ble in trixie-rcmd |
Source: | tilt-ble | piuparts summary: | | Version: | 0.2.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-tilt-ble:all | piuparts-result: | successfully-tested 0.2.4-2 | Version: | 0.2.4-2 |
todoist-api-python in trixie-rcmd |
Source: | todoist-api-python | piuparts summary: | | Version: | 2.1.7-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-todoist-api-python:all | piuparts-result: | successfully-tested 2.1.7-1 | Version: | 2.1.7-1 |
tplink-omada-client in trixie-rcmd |
Source: | tplink-omada-client | piuparts summary: | | Version: | 1.4.3-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-tplink-omada-client:all | piuparts-result: | successfully-tested 1.4.3-1 | Version: | 1.4.3-1 |
ultraheat-api in trixie-rcmd |
Source: | ultraheat-api | piuparts summary: | | Version: | 0.5.7-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-ultraheat-api:all | piuparts-result: | successfully-tested 0.5.7-2 | Version: | 0.5.7-2 |
vacuum-map-parser-roborock in trixie-rcmd |
Source: | vacuum-map-parser-roborock | piuparts summary: | | Version: | 0.1.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-vacuum-map-parser-roborock:all | piuparts-result: | successfully-tested 0.1.2-2 | Version: | 0.1.2-2 |
vincenty in trixie-rcmd |
Source: | vincenty | piuparts summary: | | Version: | 0.1.4-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-vincenty:all | piuparts-result: | successfully-tested 0.1.4-2 | Version: | 0.1.4-2 |
voluptuous-openapi in trixie-rcmd |
Source: | voluptuous-openapi | piuparts summary: | | Version: | 0.0.5-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-voluptuous-openapi:all | piuparts-result: | successfully-tested 0.0.5-1 | Version: | 0.0.5-1 |
webmin-xmlrpc in trixie-rcmd |
Source: | webmin-xmlrpc | piuparts summary: | | Version: | 0.0.2-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-webmin-xmlrpc:all | piuparts-result: | successfully-tested 0.0.2-2 | Version: | 0.0.2-2 |
yalexs-ble in trixie-rcmd |
Source: | yalexs-ble | piuparts summary: | | Version: | 2.5.0-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-yalexs-ble:all | piuparts-result: | successfully-tested 2.5.0-1 | Version: | 2.5.0-1 |
zigpy-zigate in trixie-rcmd |
Source: | zigpy-zigate | piuparts summary: | | Version: | 0.13.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-zigpy-zigate:all | piuparts-result: | successfully-tested 0.13.1-1 | Version: | 0.13.1-1 |
zwave-js-server-python in trixie-rcmd |
Source: | zwave-js-server-python | piuparts summary: | | Version: | 0.58.1-1 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com>, |
Binary: | python3-zwave-js-server-python:all | piuparts-result: | successfully-tested 0.58.1-1 | Version: | 0.58.1-1 |
zwave-me-ws in trixie-rcmd |
Source: | zwave-me-ws | piuparts summary: | | Version: | 0.4.3-2 |
Maintainer: | Home Assistant Team <team+homeassistant@tracker.debian.org> |
Uploaders: | Edward Betts <edward@4angle.com> |
Binary: | python3-zwave-me-ws:all | piuparts-result: | successfully-tested 0.4.3-2 | Version: | 0.4.3-2 |